Question about 2002 Ford Explorer

Open Question

High beam switch will not shut off on 2011 Ford Edge

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75822 Answers

SOURCE: 2003 Ford mustang High beam switch

The dome lights are not related, but the high beam problem is the steering column mounted multifunction switch, very common problem, they should recall them.

Posted on Oct 14, 2008

motor1258
  • 6674 Answers

SOURCE: My low beams work on my headlights but my High beams wont come on

Take a look at this link regarding DRL system. I know it's not exact truck but most of it would apply to yours too. It should give you hints on what to test & how.
http://www.fordf150.net/howto/drl.php

Posted on Mar 28, 2009

  • 1 Answer

SOURCE: Head lights go out when I switch to high beam

You probably have a short in your wireing somewhere so when u go to turn your brights on its too much power so then they turn off

Posted on Apr 19, 2009

  • 14036 Answers

SOURCE: I have a 1999 ford explorer sport and low beams not workiing.

replace driver module relay .it controls the low beam lights.

Posted on May 03, 2009

  • 713 Answers

SOURCE: How to replace high/low beam switch on 2004 Ford Focus LX?

Should be fairly easy. Make sure to disconnect the positive battery cable. Remove the cover from around the column behind the steering wheel. Should take a star driver to remove the screws holding the cover together. Once the screws are removed pop the cover apart and you will see the multifunction switch on the column, should have two to three screws holding it to the column remove the screws and it should come out pretty easy replace with new one and put back together.

Posted on Oct 02, 2009

Testimonial: "Thank you so much!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to correct a 2005 chevy monte carlo high beams from staying on


About 17,700 results (0.74 seconds) Search Results

    My high beams won't go off!! - Monte Carlo Forum - Monte Carlo ...

    montecarloforum.com > ... > General Forums > General Monte Carlo Talk
    Jun 8, 2012 - i flipped on the high beams last night and i think that switch in the column broke. ... My high beams won't go off! ... 2003 Chevrolet Monte Carlo. Help!! Need to get headlights working. - Monte Carlo Forum ...
    Jan 1, 2012
    Repair Guide: List of Common Monte Carlo Problems and Solutions ...
    Aug 9, 2011
    Fog lights not working, High beams stay on?
    May 9, 2011
    More results from montecarloforum.com

Jan 30, 2016 | 2005 Chevrolet Chevrolet Impala LS

1 Answer

How do I turn on bottom fog lights on 2008 ford edge.


Through the same switch that turns on your headlights; after turning on the headlights, pull the knob to the switch towards you...just make sure the high-beams are off since the fog lights will turn off when the high-beams are on.

Mar 19, 2015 | 2008 Ford Edge

1 Answer

No high beams


  1. If the flash to pass function makes the high beams come on, then the high/low beam switch needs replaced.
  2. There is a high-beam relay in this car that controls when the high beams come on, which should be when you operate the switch.
  3. Although, not usually the case, both bulbs' high beam filaments could be out. Replace one bulb to see if that fixes the problem for that bulb.

Oct 07, 2013 | 2011 Chevrolet Cruze

1 Answer

High beam headlights stuck on replaced switch same problem


It can be issue with headlight switch,but as its already been replaced.Try disconnecting high beam headlight wiring from headlight assembly and reconnect direct external wire from headlight switch to headlight assembly,then by switch see if headlight is getting off and turning on or not.
See below related help links,similar to your issue.Click the link below:----
Only high beams work but head lights not working on Ford F350?

http://howtobyme.blogspot.com/2011/11/only-high-beams-work-but-head-lights.html

----------------
Only high beams working on GMC Savana?---------- High beams stopped working but headlights still work? http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html
---------- Working of Headlight switch? ----------

Both headlight bulbs blow together?
----------

Car headlight bulbs don't last long?

------------ Only one head light works on 2001 Dodge Caravan? http://howtobyme.blogspot.com/2011/11/only-one-head-light-works-on-2001-dodge.html

----------
these will help.
Thanks.

Nov 06, 2012 | 2007 Chevrolet Tahoe

1 Answer

Location of fuel reset switch for 2011 ford edge


Not sure on your car, but the owners manual does .most ford cars have the rest switch on the passenger side above the kick panel or towards the center

Feb 21, 2011 | 2011 Ford Edge

1 Answer

1998 Windstar - the high beam lights won't shut off


CHECK THE DIMMER SWITCH. THE SWITCH MAY BE "STUCK IN HIGH BEAM POSITION. THE STEERING WHEEL WILL HAVE TO BE REMOVED. ANOTHER THING TO CHECK FIRST IS THE HIGH BEAM RELAY. THIS MAY BE UNDER THE HOOD IN A FUSE PANEL OR UNDER THE DASH. HOPE THIS SHEDS SOME "LIGHT" ON THE SUBJECT..lol

Mar 15, 2010 | 1998 Ford Windstar

2 Answers

Low beam dont work,2003 crown vic


It may also be a bad high/low beam switch.

Jul 09, 2009 | 2003 Mercury Grand Marquis

1 Answer

Headlights staying On


You probably have a faulty sentinel switch. It's supposed to shut off, has a bult in elctronic timer. Does it even have the sentinel switch?

Mar 03, 2009 | 2002 Ford Explorer

1 Answer

2006 ford freestar high beams


there should be seperate fuses for the high beams in the under hood fuse box try checking them

Nov 05, 2008 | 2006 Ford Freestar

1 Answer

2003 Ford mustang High beam switch


The dome lights are not related, but the high beam problem is the steering column mounted multifunction switch, very common problem, they should recall them.

Oct 11, 2008 | 2003 Ford Mustang

Not finding what you are looking for?
2002 Ford Explorer Logo

Related Topics:

322 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...