Question about 2002 Chrysler Voyager

1 Answer

How to remove injectors

How do i remove the injectors on a chrysler voyager 2.5 crd 2002

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 138 Answers

Take the bolts out of the fuel rail and lift the fuel rail off the injectors then remove injectors

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Heater only blowing cold air 2002 chrysler grand voyager 2.5 crd


check and see if the a/c compressor is running,if it is unplug it and see if you get heat,or it could be a heater actuator stuck or bad........good luck

Feb 11, 2013 | 2003 Chrysler Voyager

1 Answer

Gear box oil


my granddad has a voyager LX CRD, he has problems with getting the car into gear, as he says if you are lazy (cutting corners on the gearbox) it won't go into gear. we checked the gearbox oil and it was low and also it seemed that it was transmission fluid (for an automatic car) ALTHOUGH my granddads car was a manual. this is the one thing that chrysler don't come first for - Manual Cars
hope i helped you

Apr 15, 2012 | 2002 Chrysler Voyager

1 Answer

I have a Chrysler Grand Voyager crd 2.5 crd 2001. I am having trouble in replacing one of the glow plugs which is directly behind the distributor. There is not enough clearance to withdraw the plug from...


this is what happens when you try to make a chrysler a mercedes. Sometimes you have to charge more to work on these kind of cars and if the engine has to come out to get to it that is what it takes. I worked on a bmw that the pulley had a cover on the center you couldnt see any way to release it. I am guessing this is german technology bmw mercedes crd get it. Remove the cover off the tensioner and there is a bolt under i would lay odds on it loosen the pulley then is should have a way to turn a long bolt that iadjusts it for tension

Dec 12, 2010 | 2001 Chrysler Voyager

1 Answer

Manual chrysler grand voyager 2.5 SE CRD


yes what do want to know ,these cars like this we do have in spain

May 17, 2010 | 2002 Chrysler Voyager

1 Answer

2.5 voyager crd on 52 plate Not starting


petrol or diesel ??,,factory immobiliser ???could very well be ,only need to leave key in pocket with a mobile phone and its a non starter .shouldnt cost more than 200€ to reset the key ,tried the spare key??

Jan 17, 2009 | 2002 Chrysler Voyager

1 Answer

Fitting a cambelt on chrysler voyager 2.5 crd 2002.


Have a look at this link, it is the 2.5L, but just be sure all looks same. Scroll down pictures on left & click on picture to expand

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528018db59

Dec 07, 2008 | 2001 Chrysler Voyager

1 Answer

2.5 voyager crd on 52 plate


Hi there, you will need to remove the injector and replace the copper seal on the base of the injector. You do this by de-pressurising the fuels rail, ie, loosen the metal pipe attached to the injector, fuel will spill till all pressure has gone. remove the metal pipe and the multiplug connector too, remove the clamp and bolt holding the injector in place. Gently twist the metal part of the injector body and with an upwards motion remove it from the bore. Clean the bore thoroughly and use a vacuum to remove the carbon as you scrape it away. Once happy everything is clean, replace the copper washer and refit the injector in reverse order as for removal. You will have a sealed injector and no blowing will be heard.

Hope this helps

Cliff

Nov 28, 2008 | 2002 Chrysler Voyager

2 Answers

2002 Chrysler Voyager 02 sensor


From under vehicle, follow exhaust down from engine, eventually you'll see a piece about 3-4" long sticking out side of the exhaust with wire(s) going to it.

Oct 29, 2008 | 2001 Chrysler Voyager

1 Answer

New chrysler voyager se crd will not start reliably


Hi there I have a crysler 2002 model and my cd does not turn on. Can you please tell me where th fuse for it.

Regards
Tony

Sep 12, 2008 | 2002 Chrysler Voyager

Not finding what you are looking for?
2002 Chrysler Voyager Logo

Related Topics:

765 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...