Question about 2001 Volkswagen Golf

1 Answer

Replacing disc brakes on a 2000 volkswagne jetta

I was told that i needed a tork to lose the nut to get the brakes off the calbur, if so is there some kind of settings or size i need to know about?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 138 Answers

You will need a 7mm allen wrench to remove the caliper and the bolts come in from the back side once the two bolts are removed and you slide the caliper off you can use a c-clamp to push the cylinder back in to the caliper. Do not unhook any lines or loosen them and you will not need to bleed the brakes afterwards

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the tork for the weel hub inch.pound middle bolt for hyunday santafe 2009 does sombody nows


Hi,I dont know the tork for the hub,but I have worked on maney cars in my life time and I have never used a tork, and had know complaits.
so if you wont to do it your whay fine,but I will tell you aney whay so you have options.
just tighten the hub nut fully home then undo the nut slowly untill the disc can move around freely thats all you need to do.
all the best.

Apr 30, 2015 | 2009 Hyundai Santa Fe

1 Answer

Remving caliper pins on 2000 vw jetta and caliper


For front brake pads replacement you need only usually wrench set, inclusive 7 mm allen key also. But for rear brake pads replacement you need obligatory a special caliper piston pressing tool, in order to press back rear caliper piston with parking brake automatic adjustment!!!
For front brake pads. You should buy the brake pads (with wear sensor). For change front brake pads you must raise vehicle, remove wheels, extract the retaining spring of the caliper, and remove the caliper as follow:
1. Do not disconnect the brake hose from the caliper, and do not allow the caliper to hang by the brake hose!
2. Remove top and bottom caps (on back side of the caliper) for access to guide pins, then unbolt and remove them from the brake carrier. Remove the caliper.
3. Now you must thoroughly clean the brake calipers (free of grease).
4. Remove outer brake pad from brake carrier.
5. Pull inner brake pad out of brake caliper piston.
6. Check up the brake fluid level on the reservor, and emptying if neccessary!
7. Push piston back into brake caliper housing.
8. Install inner brake pad (with expanding spring) in brake caliper piston. (Arrow marked on pad - if exist, must point in direction of brake disc rotation when vehicle is moving forward).
9. Install outer brake pad into brake carrier.
10. Bolt brake caliper housing to brake carrier using two guide pins. Tightening torque is 25 Nm.
11. Install both caps.
12. Insert retaining spring into brake caliper housing. Important: Depress the brake pedal firmly several times while the car is stationary so that the brake pads adjust to their normal operating positions!!! Check brake fluid level and top up if neccessary!!!

Jun 26, 2011 | 2000 Volkswagen Jetta TDI

1 Answer

1998 VW Jetta GL . When I Put My Hand Break Down , Brake Light On Dashboard Doesnt Come Off Completly , In That Case HeadLights Wont Come On When HeadLight Swtich Is On .


the emergency brake needs adjusting. the cover around the e-brake should be removed, and behind the e-brake arm should be a cable and tighten the nut on the end of the cable until the slack is removed from the cable. turn nut, then turn key to accessory, then release e-brake , see if the brake light goes off, if not turn off ignition, tighten e-brake nut again, turn key back to accessory release e-brake, see if light goes off. do this until you see e-brake light on dash go out. headlights should come on.

Feb 12, 2011 | 1998 Volkswagen Jetta

1 Answer

Can't get rear brake bolts loose on 2000 cadillac el dorado


use only a socket or if you have space use a ring spanner.NEVER use open ended spanners on any nut/bolt.except to stop it turning.....

Jul 11, 2010 | 2000 Cadillac Eldorado

2 Answers

2000 Dodge Caravan....broken wheel studs...


Yeah , it's a fairly simple repair, All the wheel studs must be replaced and lug nuts also.Closely examine the wheel or get competent tyre replacement company to double check for damage ! Remove the brake disc caliper and brake disc itself (usually 2 cross head screws) , tap off (gently) it may be stuck thru corrosion / rust etc , Broken studs can be knocked out(towards drive shaft ) of the hub assy with a suitable drift and hammer (splined into hub) . The studs are a servicable replacement part. Check all other wheel nuts as this is usually a result from poor fixing or wheel replacement recently .. Good luck

Apr 05, 2010 | 2000 Dodge Caravan

1 Answer

How do i change a brake light bulb on 2000 vw jetta?


Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Remove rear luggage compartment side panel trim (left or right).
98971821.gif
  • Remove 3 nuts, arrows, and remove housing.
  • Remove bulb holder.
Installing:
  • Install bulb holder.
  • Insert housing into body opening.
  • Tighten nuts.
  • Install applicable rear luggage compartment side panel trim.
Rear Light Bulb Holder Removing And Installing:
Removing:
  • Disconnect electrical connector.
  • Depress retainers, arrows, and remove bulb holder.
98971817.gif Installing:
  • Install in reverse order of removal.
And the Center Mounted Brake Lamp.
High mount Brake Light Removing And Installing:
The high mount brake light is installed in the rear shelf.
98971288.gif Removing:
  • Switch off all electrical consumers, switch off ignition key and remove ignition key.
  • Disconnect electrical connector from high mount brake light.
  • Remove rear shelf
  • Un-clip high-mount brake light from rear shelf, arrows.
  • Install in reverse order of removal.
NOTE: The bulb holder base plate contains soldered- in light emitting diodes (LEDs) that are not replaceable. In the event of LED malfunction, replace complete bulb holder.
Additional

Mar 13, 2010 | 2000 Volkswagen Beetle

1 Answer

Replacing disc brakes on a 2000 v.w jetta


When I changed my sisters VW Jetta I used the follow:
  1. Lug Wrench
  2. Ratchet
  3. Socket to fit the caliper bolts (can't remember size)
  4. C-Clamp to push the piston back in
  5. Bucket to set the caliper on while changing the pads
On the rear brakes I had to borrow the special tool to push in rear disc brakes from AutoZone, this tool spins the piston while pushing it back in.  Let me know if you have any other questions.  Thanks for an honest rating and thanks for using FixYa!

May 19, 2009 | 2001 Volkswagen Golf

1 Answer

1995 Volkswagn Jetta door lock fell off and alarm went off, car w


the same thing happened to my 1996 jetta trek.

when the alarm went off on me and the car would not start i walked around to the passenger door, locked and unlocked it, therefore the alarm went off.

but the alarm only went off if the car battery was low and had trouble starting.

Jan 15, 2009 | 1996 Volkswagen Jetta

Not finding what you are looking for?
2001 Volkswagen Golf Logo

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...