Question about Ford Cars & Trucks

Open Question

1998 e350 high beams not working and cause fuse #10 to blow

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 326 Answers

SOURCE: 2008 Ford F-250 Low beams do not work. High beams are fine.

just remove all the connections as it could be malfunction in the switches and the wirings needs to be rechecked to make it proper.other option could be bad dimmer switch. You will need to replace the turn signal/ dimmer switch as an assembly.to replace you will need to disable the air bag, drop the column, pull the wheel

Posted on Jan 10, 2009

  • 708 Answers

SOURCE: LOW BEAM HEADLIGHTS DON'T WORK FUSES ARE GOOD AND

If you are handling the bulbs with your bare hands that is why your bulbs keep blowing out. use a washcloth to put the bulb in or rubber gloves, anything that will keep your hands from touching the bulb.

Posted on Oct 05, 2009

  • 7353 Answers

SOURCE: low beams don't work - both out at the same time.

DID YOU CHECK THE BULBS?

Posted on Nov 04, 2009

Testimonial: "spot on."

  • 3 Answers

SOURCE: low beam not working but high beam is-Pontiac Vibe 2005

I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.

Posted on Feb 23, 2010

  • 564 Answers

SOURCE: Low beams don't work; High beams fine. Not the

some have fuse under hood for high beams & low beams,,if ok,,u mite need a high & low beam switch,,,,

Posted on May 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 honda acc'd lx front lights low beam out but high beams are fine. fuse box under hood both h & low beams use same fuse is there a different fuse I am unaware of in the circuit that I can check?


The low beams have a different fuse then the high beams. High beams fuse's 3 & 5 both 10amp . low beams are 1 & 6 both 10 amp . plus there is a relay control module . The relay for the low beams could be bad ,or the light dimmer switch is bad . or the combination switch control unit is the culprit . You can find a wiring diagram at http://bbbind.com/free_tsb.html . Check out some basic electrical trouble shooting videos on you tube an test the circuit .That's best advice I can give , trouble shooting automotive electrical systems is no easy task . Especially for a rookie . Headlamp switches are not wired directly to the headlamps , the switch is a low voltage input to the combination switch control unit ,which then sends a signal to the relay control module for activation . All electronics

Oct 05, 2016 | 2005 Honda Accord 2.4 LX

2 Answers

Why does my high beam only works on right side1998 nissan altima


If the fuse blows violently (i.e its pretty black inside the fuse as opposed to just the fuse link being melted) then its a dead short to ground. Follow the hot wire from the switch to the light, someplace its contacting metal and shorting out.

Jul 29, 2014 | 1998 Nissan Altima

1 Answer

Why does my head lights only work on high beam or side lights


Some cars have a different fuse for high and low beam so if one blows you don't loose all lights. Also there are tow elements in each bulb, The low beam is used most so it usually goes first leaving only high beam. For a 10 year old car this is the most likely cause.

Jun 15, 2014 | 2004 Rover 25 2.0

1 Answer

Highbeams do not work on Elantra GT 2004... regular beams work fine. Fuse keeps popping.. Any thoughts?


remove the headlight bulbs and retest; if a new fuse does not blow
one of the bulbs is shorted if the fuse does blow check the high beam wiring for a short if none is found replace your high beam switch

Sep 30, 2013 | Hyundai Elantra Cars & Trucks

1 Answer

Hello, The low beam on the headlights of my 1998 Chrysler Sebring do not work but the high beams do. Is the problem a bulb or fuse and how do I replace the part?


it is most likely a blown fuse as the HIGH & LOW beam lights may have separate fuses, check the fuses in the fuse box under the hood or under the dash...... hope this helps......cheers.

Sep 22, 2011 | 1998 Chrysler Sebring

2 Answers

Where would i find the headlight relay and/or headlight fuse in '98 jeep? my headlights just stopped working both high and low beams.


that wont be a fuse. yud have to blow 2 fuses for that to happen. (high and low fuse)

i would look more closely at the ground and power to the circuit, especially if they were both operating properly before.

Oct 06, 2010 | 1998 Jeep Cherokee

1 Answer

If a bulb is out will it make 15A on #2 keeps on blowing out. Changed the relay, hi/lo beam switch. Low beams still won't work. Can't keep a fuse in it cause it blows out. This is for a 2000 Sonata 4 cyl....


the only thing that causes a fuse to blow is a short. I would say a wire is pinched somewhere, the question is how to isolate and fix. I guess have a handful of fuses, since you say it is the low beams I would disconnect one light and see if it blows the fuse. I am thinking that the most excellent place to start is where the battery is installed. As a wire may have been nicked or crimped, for the low beam on the passengers side. Hope this helped

Sep 23, 2010 | 2006 Hyundai Sonata

1 Answer

Where is the placemnt in the fusebox for the fuse for high beam lights on a ford e-350 for van


usually the headlights have a relay in a fuse box under the hood. is it just the high beams that don't work. have you tried a new bulb. sometimes they look ok but do not work. also do you hear the switch click when turning them on and is there an indicator coming on in the instrument cluster? good luck

May 13, 2010 | 2002 Ford E350

1 Answer

Low beam headlamps wont turn on change bulbs and checked fuses and still wont come on.


did you check for a relay in your fuse panel? there should be a relay that controls your low beams and one for your high beams. check for that and then if high beams are working swap it with low beam relay. if your problem switches to low beams working and high beams not working replace the bad relay.

Jan 26, 2010 | 1998 Ford Explorer

1 Answer

Both low beam headlights stopped working at the


Could be the relay for the lowbeams is faulty, if your DRL's are your lowbeams, then your DRL Unit could be bad. Also did you blow a fuse cuz a random surge could blow the fuse

Aug 12, 2009 | 2005 Mazda 3

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...