Question about Cars & Trucks

Open Question

Ford F150 ignition key blocked Cannot put in key in

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
adew7
  • 6 Answers

SOURCE: ignition alarm will not stop 97 ford f150

The key switch usually breaks or wears out and makes contact. It is on the lock cylinder. This would cause the chime to not come on, or stay on. Sounds like the switch is bad.

1997 F-150/250 Warning Chime, Key-In-Ignition The key-in-ignition chime warns that the key is still in the ignition when the driver's door is ajar. The key-in-ignition warning chime will sound when:

  • GEM: Driver door is ajar, the ignition switch is in the OFF/LOCK or ACC position and the keys are in the ignition.
  • CTM: Driver door is ajar, the ignition switch is in the OFF/LOCK, ACC or RUN position and the keys are in the ignition.
The key-in-ignition warning chime will stop sounding when:
  • Driver door is closed.
  • Key is removed from the ignition.
  • GEM: Ignition switch is switched to the RUN position.
The key-in-ignition warning chime inputs are:
  • Ignition switch RUN position (battery potential on both RUN and RUN/ACC inputs).
  • Ignition switch ACC position (battery potential on RUN/ACC input only).
  • Key-in-ignition switch (grounded with key-in-ignition, open circuit with key-out).
  • LH door ajar switch (open circuit with door closed, grounded with door ajar).
This is a pic for a 98, could not find one for 97 which may be the older style which is more prone to break.
5a6d33c.gif

Posted on Feb 25, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 ford f150 won;t shift out of park, changed the interlock switch did not help!! HELP ME


try turn ignition key toward on but do not go to where the power on and try put it to neutral if that works , It might be the fuse for Backup lights

Jan 11, 2014 | 2004 Ford F150

1 Answer

I have a 1985 Ford F150 That does not run. Will not turnover & no lights. I have had the alternator & battery checked. Both are good. I have replaced the starter selanoid coil, Ignition coil, starter...


There can be a starter lock-out which requires your to foot press the clutch or the brake pedal. But without lights you have a different problem.

Check your fuse block for power. There is a Master link somewhere under the hood and they usually put them close to the Positive side of the battery. The Master link is like a fuse only in wire form. You will also find a heavy wire that supplies power to the fuse block. Often the fusible link and the feed wire to the fuse block are the same wires.

Your Alternator, battery, etc. will test good all day long, but you need power in the fuse block.

Turn the Ignition to ACC and notice if the radio has power or turn the key to run and notice if the Brake lights work when you press the brakes.

If you have power there, then troubleshoot the wire to the starter relay. Most likely when you turn the ignition key(start) you will not have power going to the starter relay like you should. You can also test the coil Positive wire with the key in RUN position.
It should have power.

That's all I have for you.

Oct 14, 2013 | 1985 Ford F150

3 Answers

I think the ignition switch is stuck in 83 ford f150. when you put battery cables on it is trying to start. I can put the key in and turn it and take it back out, but until the battery is disconnected it...


If your able to remove the key it's more likely that your solenoid is locking up. If the engine is actually starting then it could be the bendix is locking into the flywheel and not allowing the starter to release.

Jun 14, 2010 | 1983 Ford F150

2 Answers

F150 ford truck 1990 key wont turn over engine new ign. switch


we have 1998 ford f15 we replaced the ignition and it still wont start the truck,, the key turns over now and the radio and everything comes on but it wont start, what is wrong???

Mar 18, 2010 | 1990 Ford F150

1 Answer

Turn ignition key and motor starts up, next day turn ignition key and motor just turns over and wont start. could it be anti theft problem its a 2002 f150 4 wheel drive with 4.6 liter


This could be caused by either a faulty Crank Shaft Position Sensor or the anti-theft system. Try put key in, turn to ON position for EXACTLY 10 minutes, As SOON as anti-theft light shuts off or stops flashing, then IMMEDIATELY start the engine.

Jan 13, 2010 | 2002 Ford F150 Regular Cab

1 Answer

How do I change ignition switch on a 1994 ford f150


Using the correct ignition key, put the key in the ignition switch and turn to the accessory or on position. look under the switch on the underside of the column and you will see a small hole. Use a small poke tool like an awe or a big stout paperclip and push the pin. you will feel it move when you poke it. pull the ignition switch out with key still in it. The switch has to be turned in order to get it out smoothly without damage. Please leave feedback to let other know if this helps your situation. I know this will as I replace ford switches daily. Thanks

Nov 08, 2009 | 1994 Ford F150 Styleside Supercab

1 Answer

1992, 4.9L f150 has no spark. I have a new distributor, computer, ecc, coil, wires, plugs, checked fuses, cleaned connectors, new relays, have 12v at the coil, good ground and no spark at all? help.


Help,
I have a 92 F-150 XLT with a 5.0. The ignition switch block burned up so I replaced it. Now it will not get spark when I crank it over, but when I crank it and let off of the key, I get one spark jump from the coil; to the distributer. (I have a spark tester I placed on the cap to the wire) I have replaced the coil and the ignition module that is on the fender attached to the brain, I have replaced the ignition cylinder and key (It was acting up) and I took the dash apart to see the wire harness to ensure there was no burnt wires. (The wire connection to the ignition block is not damaged from when the switch burned.
Does anyone know if there is a part that tends to go bad when the ignition block burns up??
Help, Thanks, Todd

Oct 17, 2009 | 1992 Ford F150 SuperCab

2 Answers

Ford 1995 F150 Truck. Turn ignition key off but Truck still runs


ignition switch electrical portoin above brake pedal on steering column

shack

Apr 14, 2009 | 2004 Ford F150

1 Answer

My f150 want start ford f150 truck


I would buy a new solenoid there only about ten bucks and usually what goes bad. also check the connections. I hope that helps you out.

Jan 02, 2009 | 1994 Ford F150 Styleside Supercab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...