Question about 2002 Ford F150 Regular Cab

1 Answer

REVERSWE LIGHT NOT WORKING

MY REVESE LIGHT WILL NOT WORK I HAVE CHANGED THE BLUBS BUT STILL IT IS NOT WORKING I CHECK THE FUES NONE IF BLOWED, WHAT ELSE TO DO

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 37 Answers

There is an actual switch that gets activated when you move the shifter into rev, I would suspect that this switch is bad or the connection to it is corroded. You will need to google Reverse Light Switch to find it's location.

Posted on Dec 30, 2013

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: i have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem

Brake lights and turn signal both work off the same wire one for left and one for right but the tail light both sides work off one wire check the wiring harness and check the ground it will be in the frame on the rear drivers side.

Posted on Feb 25, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail lights, instrument panel lights, and license plate lights not working. Fuse blows immediately when changed.


that line on that fuse is shorted, the fuse saved the fire.
we use an ampclamp DC ammeter to find the wire that is shorted
and the actual point of short.

the park-tail circuit (tail fuse, right) is the most complex of all.
20 lamps inside car, and many out side, it is the hardest to find of all shorts. but not with the tool
first check for damage behind all park lamps
i bet the fuse blows in park (1st click) not head lights. right?
side lamps the 4 front rear park lamps, some call it tail its not really tail now, was in 1920 ,not now. park is everywhere.
but the fuses can be marked tails, for fun .
imagine, calling the 2 front lamps tails. and are on .(my on going joke)
sidelamps,
the inside lamps are many too.
all dimmable lamps. so turn the dimmer down to zero and see if fuse blows now, NO?, bingo.

the best way to fix this is , visual inspections for collision damage or wire hacks in the cab.
then the fuse is pulled and circuit breaker inserted 15amp
(they sell em)
then we connent the ammeter to the wire (output of fues)
i push the switch and amps goes to infinity and the CB trips
if follow the cables, and find what line is shorted.

i missed one problem
on the rear or front 4 corners of the car may be twist lock blubs.
like 1157 or? these love to short. push in lamps never short.well not the lamp actual.
in not sure what lamps the 06 uses, but replace the brass based lamps. (in park tail ckt)


Jan 02, 2014 | 2006 Toyota Matrix XR

1 Answer

My dash lights work but no other light inside my car works


the fues blow because there is to much hook up to it buy a 20a to replace a 10a and see if that works

Mar 08, 2013 | Cars & Trucks

1 Answer

What is the fuse box layout for 1998 nissan pulsar need to change a fuse but layout is all in Japanese dont know which fuse to look for . both front park lights are not working so wanted to check the...


Hi,if you know where the fues box is your half way there.
just buy a electricle screwdriver that has a light inside it with a wire that has got a crockerdile clip on the end,
put the cockerdile clip on a earth the body of the car,
then look at the fues on the top of the fues there is two little bits of metal these are where you will put the screwdriver blade to,
if yoy put the ignition on then go back to the fuesestuch one side of the fues on the little bit of metal the screwdriver should light,This is the power side,now if you tuch the screwdriver on the other bit of metal the light should come on again,if it dose the fues is ok,
if not the fues is falty(replace fues)do this to all the fueses and you will find the fues that is falty.
all the best.

Mar 20, 2011 | Nissan Pulsar Cars & Trucks

1 Answer

Change headlight blub


The whole head lamp assembly has to come out to replace the headlight bulb. Here's how to do it.

Here is a link to instructions
http://autorepair.about.com/library/a/1i/bl808i.htm

Jun 18, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Turning light and brake light do not work


battery may need replacing also have you altrnator checked out if your battery is 4 years or younger.

Jun 15, 2009 | 1997 Mercury Grand Marquis

1 Answer

Why do my fues keep blowing on my daewoo


First I suggest confirm what fuse blowing there and waht circuit and edevices are controled, check some wire broken or bad ground in the line and switch (if have one there).

Keep us updated.

Mar 27, 2009 | 2001 Daewoo Leganza

1 Answer

Tail light problem


look at all wiring, weather can make the skin of a wire become brittle, 2 or more wires can be touching one another

Feb 23, 2009 | 1986 Dodge Aries 4 Door

Not finding what you are looking for?
2002 Ford F150 Regular Cab Logo

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

fordexpert

Level 3 Expert

5575 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...