Question about 1999 Mercury Cougar

Open Question

Brake line diagram

On the master cylinder witch brake line goes to witch tire

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 491 Answers

SOURCE: do ou have a diagram for the brake lines on a 1991 mercury cougar

YOU WILL NEED TO GET A NEW BRAKE LINE MADE FOR YOUR WHEEL CYLINDER THIS WILL HAVE A THREDED NUT WHICH WILL FIT INTO A HOLE IN THE WHEEL CYLINDER, IF THE BRAKE IS AT THE MASTER CYLINDER YOU WILL STILL NEED A NEW ONE MADE FOR THIS , GO TO A MOTOR SHOP WITH YEAR OF CAR AND GET A NEW ONE , OR GO TO A CAR BREAKERS YARD FOR USED ONE .

Posted on Oct 20, 2009

  • 71 Answers

SOURCE: I have no pressure in my brake lines.

Make sure youre bleeding the lines correctly. Also you may have purchased a faulty master cylinder, trust me on that i bought two back to back and they were bad batch. check for cracked lines throughout the system.

Posted on Nov 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake pedal goes to the floor and doesn't come back. I have changed master cylinder and power brake booster and bled the brakes. Anything else I can do?


That sounds very much (no, it sounds exactly) like either of two things: either the brake fluid in the master cylinder is very low, or the master cylinder has failed. If anything else were the cause (caliper or wheel cylinder failure, line leakage), then you'd find brake fluid either on the ground or on the inboard surface of one of your tires. Just cause it's new dosnt always mean it's good.

Apr 02, 2016 | Cars & Trucks

3 Answers

My break peddal goes all the way to the floor and break fluid is leaking out by the back right tire area why


Sounds like the brake wheel cylinder is leaking check the master cylinder and it will low or empty.

Jul 24, 2014 | 1996 Chrysler Concorde

2 Answers

Brake diagram


DANGER ! DO NOT DRIVE IT !!!!

cause by:
1: breach in system, see DOT3/4 fluid on pavement or on fire wall
next to MC? front and Rear !!! on inside of tire walls?
2: MC end of lie.
got ABS , you did not say.
my guess, not , it started in 1996, but some cars 91.(have one)

3: air in the system. end to end.
usually caused by removing parts, and not bleeding system

MC = master cyclinder the pedal connects to.

Oct 12, 2013 | 1994 Ford Explorer Limited

1 Answer

Which brake line goes to which which wheel from the master cylinder?


Not familiar with this model, but most cars have only one output and one return line to/from the master cylinder. The output line usually goes to a proportioner valve downstream from the master cylinder. This valve applies more pressure sooner to the rear wheels, then to the front. This prevents "fishtailing" when braking hard. If you follow the forward-most line away from the master cylinder, you'll probably encounter a block where this line feeds in and two or four lines feed out. That's the proportioner valve.

Sep 27, 2013 | 1998 Dodge Stratus

1 Answer

1997 ford escort brake line diagram, more info


If the steel lines are not rusted out and leaking, what are you trying to do or figure out?
I don't think you do know what is the problem is with your braking system?

Aug 03, 2010 | 1997 Ford Escort

2 Answers

1997 ford escort brake line diagram


The LF and RR are in an independent circuit of the RF, LR wheels. The master cylinder already has the lines hooked up in a way that if you trace the lines, you can make your own diagram.

Aug 03, 2010 | 1997 Ford Escort

2 Answers

How to bleed the brakes on a1999 chevrolet venture van instaslled new brake pads on front tired to bleed brake pedal all the way up when van not running - goes to floor when van is running


Start with brake in the rear that is the farthest away from the master cylinder ( if your master cylinder is on drivers side start with passenger rear,pump up brake pedal until hard have someone else open bleeder valve until air or fluid squirts out,while holding brake pressure even if goes to the floor dont release pedal until bleeder valve is tightened or you will **** air back into the line,do this several times making sure you get a full stream of brake fluid and no air,continue to other rear wheel and then proceed to front wheel furthest from master cylinderand then final wheel. if you still don't have brakes change master cylinder and bleed all brakes again.

Jul 05, 2010 | 2000 Chevrolet Venture

1 Answer

Where is the rear brake line on the master cylinder


the rear brake line is connected to the master cylinder inside the hub ..remove the tire and remove the hub the 2 bolts that hold the master cylinder in place are at top the line going into the cylinder itself is the brake line

Sep 26, 2009 | 1995 Chrysler Sebring

Not finding what you are looking for?
1999 Mercury Cougar Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...