Question about 2004 Toyota Sienna
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Toyota Specific Trouble Codes
P1135 Air/Fuel Sensor Heater Circuit Response. (Bank 1 Sensor 1)
If you have changed the proper sensor then you may need to have the cam shaft looked at.
Posted on Dec 16, 2008
Check your switches for the VSC, some get bumped on (due to their location) and some get stuck in the "on"position.
Posted on Aug 04, 2009
Sounds like you have a faulty Steering lock. Try wiggling the steering whell while turning the key, also make sure gear shift is park.
Posted on Nov 29, 2009
Testimonial: "It worked. Thank you very much."
Hello. Welcome to FixYa.
No, the P-2716 DTC is not a recall.
It is a software issue that results in a 'false code' being generated.
What Toyota is doing is replacing your computer with an updated unit; the programming in the current computer needs to be changed, and the Corolla computer you have cannot be 'reflashed', it must be physically changed out.
If you car has less than 80,000 miles on it, the replacment will be free.
Get in touch with your local toyota dealership, and they will get you a new computer.
Posted on Feb 12, 2010
Tips for a great answer:
Mar 08, 2015 | Toyota Cars & Trucks
Dec 03, 2014 | 2004 Toyota Sienna XLE AWD
The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.
Sep 20, 2012 | 2004 Toyota Sienna
May 30, 2010 | 2002 Toyota Sienna
Mar 12, 2010 | 2004 Toyota Sienna
Nov 29, 2009 | 2004 Toyota Sienna
Aug 06, 2009 | 2006 Toyota Sienna
Jan 04, 2009 | 2004 Toyota Sienna
Jul 25, 2017 | 2004 Toyota Sienna
15 people viewed this question
Usually answered in minutes!