Question about Chrysler Voyager

Open Question

Speedo and cruise control not working 400.1 code

Fuses ok.test showing 400.1 error code.i did disconnect battery and nothing happened.please help me

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: cruise control doesn't work

does cruise show up in led when you start engine

Posted on Sep 29, 2008

  • 1 Answer

SOURCE: 2003 expedition cruise control inoperative

I had this same Problem and it was a simple vaccuum hose leak connected to the cruise control module. Try replacing this small hose.

Posted on Mar 01, 2009

landsend
  • 1066 Answers

SOURCE: cruise control won't work, 10 amp. fuse in fuse box under hood ok

look at the other fuse box under the dash

Posted on Mar 21, 2009

  • 83 Answers

SOURCE: 2000 grand marquis cruise control not working

Have seen this problem before. You need to look under dash at brake pedal and find a blue switch with plunger contacting pedal, disconnect connector and jump with a peice of wire and drive to see if cruise works and if it does replace deactivation switch this should get you going.

Posted on Aug 26, 2009

  • 436 Answers

SOURCE: the horn and cruise control doesn't work,fuses are

the horn input to ground is located in the cruise control module. if they both don't work then your cruise control module or the clockspring coil for the steering wheel needs to be replaced. If airbag lights is on as well then I would change the clockspring coil first.

Posted on Oct 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2006 chevy trail blazer cruise contol does not work. Cant find a fuse under hood or under back seat. Help


Your owners manual should show you where the fuses are located. If you don't have an owners manual, you can go to
my.gm.com, type in your year--make--model and hopefully read your owners manual for free.
Do the brake lamps work ok?
I found these fuses, not only check fuses, check for voltage on fuse circuit, use a test light. Some fuses are hot all the time, some go hot with the key on.
Any codes for the cruise system?

cruise-jrszcqxgyb55p1ppvbuj0bbf-2-0.jpg

Feb 18, 2017 | 2006 Chevrolet Trailblazer

1 Answer

Blower Motor on 2000 Saturn SL


The blower motor is connected to a termic switch, when the motor is fine and fuse is ok, is the switch that must be replaced.

Ensure the fuse is ok first.

Oct 02, 2008 | 2002 Ford Crown Victoria

2 Answers

How to repair cruise control?


Try from Servo control follow connection To I beleive Transmission casing . Look for Burnt wiring / frayed / damaged ...Cruise should maintain speed signal Like speedo cable . Computor management black box / ECM may have direct control so Look for engine bay fuse boxes = 2 under hood . More fuses ++ relays 2 check inside cover is diagram of size + what it controls . A Reset 2 ecm may help by disconnecting Battery - Let sit 30 mins.. Older models + 4 wheel drive Trans has Gear wheel of plastic 2 count revolutions as speedo cable does . If said wheel teeth have worn out then Cruise counts incorrect or fails 2 activate . If you replaced brake pedal Light activation switch then be sure brake Tail lights DO work if not the cruise will fail as brake pedal is part of safety feature to turn it off in emergency disconnect . The signal light Stalk that Turns off L / R signals is Common Item 2 wear out BUT it also controls Turning on cruise or setting ...IF you have Steering wheel on / off / setting control - then issue can be frayed / cut wires due 2 steering wheel movement ....solutions remove wheel BUT 1 st disconnect Air Bag Fuse then wheel and search connections .....Good Luck ...

Apr 16, 2015 | 2002 Chevrolet Tahoe

2 Answers

My cruise control stoped working, my speedometer still works


cruise control have there own fuse check that ,make sure it is still hooked up to throttle ,check vacuum lines and power plugs , your speedo has nothing to do with cruise,also check that it is activated,test horn ,YES horn and cruise use same relay ,make sure your brake pedal is retracted ,and that brake lights work as well, good luck with it if I can be of further help get back to me ,hope I helped you.
Woody

Aug 27, 2014 | Cars & Trucks

1 Answer

The audio controls on steering wheel don't work - although the cruise control does


Have you checked the connection under the air bag on the steering wheel but you must remember to disconnect the battery leads then leave the car for 30 minutes for the air bag to discharge before doing that I would pull the radio out from the dashboard and check all the multi plugs on the back of it first there are normally a fuse for multifunctional steering wheel control just check make sure you tested the right fuse

Apr 06, 2014 | Cars & Trucks

1 Answer

HOW TO DO CRUISE CONTROL SELF DIAGNOSTIC


Check the wires. This happened in my grandmother's car. Mice chewed through her cruise control wires and f;d everything up. Check continuity between the wires from PCM to output on your wiring diagram.

Feb 22, 2012 | 1998 Buick Regal

1 Answer

HI, I have a 1988 Ford Ranger, V-6, 2.9L. I've had problems with the engine stalling on an intermittent basis. The first time it happened was when I switched on the cruise but it has happened since with or...


I solved this problem so I'm posting this to help others. I was getting a code indicating a problem with the BOO switch (brake on/off). C the switch which is located on the brake pedal and continued to have a code 74. I found out that the cruise control has a redundant brake on/off switch at the end of the cruise control vacuum hose which is also located near the top of the brake pedal. I disconnected and plugged the vacuum hose leading to this switch and removed the cruise control from the engine compartment. This solved the trouble code problem although I don't have cruise anymore.

Mar 26, 2010 | 1988 Ford Ranger

1 Answer

'92 Town car airbag indicator flashes, cruise control not working


you need to have a diagnostic done in order to get an error code and take it from there..

Sep 05, 2009 | 1994 Lincoln Town Car

1 Answer

Fuse keeps blowing


Greetings..hopefully we can help or at least isolate the issue. You need to know that there was a few recalls with the cruise control system which is involved.. speedo and odometer is possibly in that circuit..but I am sure the ac had a separate fuse and relay...I do not have a book or schematics here. ,,I would disconect the wires to the ac compressor taking that out of the cause... I would also disconnect the cruise control wire to the unit and drive aroud for a day or so to see what happens. This is whats known as isolate and test . It may take some time but it will give you answers to what is the cause and then check that system out with us. At least you will have it narrowed down...ps ..do not forget at when it happens and what type of roadway ( bumpy, soft, wet, snow) as it all plays a part in diagnostics. I hope this helped.

Apr 01, 2009 | 2000 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...