Question about 2006 Volkswagen Polo 1.6

Open Question

Volkswagen polo 2013 front and rear door handle removal

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 62 Answers

SOURCE: How do I remove the front interior door panel polo 1400 1999

You'll need a torx bit for the bottom screws. The door handle comes apart (using a screw driver) to expose 2 phillips screws holding the door handle to the door, after you get those out, pop the rest of the push clips out by firmly pulling on the door panel near the bottom, There may also be another screw on the TOP Front (near the mirror) very small phillips. Once you have the door panel loose, lift UP on the door panel to remove. Once you get that panel off, you'll have to remove all the other screws to get the window regulator out (lots of 10mm bolts). Unclip / unconnect the connections etc..

Posted on Jul 11, 2009

BCAS1298
  • 3092 Answers

SOURCE: 1993 Volkswagen Cabriolet Special Edition door handle.

No you can not switch from door to door, also that is only a dealer item sorry. Goodluck.

Posted on Dec 07, 2009

Testimonial: "Thankyou for your accurate and prompt help. It was greatly appreciated. "

  • 2 Answers

SOURCE: rear passenger doors on vw polo 2003 not working. cant open doors

Mine is doing the exact same.

Have two solutions, will try it later today:

1. Unlock with remote tnen lock with key and then unlock with key.
2. Might be a power problem, check that batery is good.

Posted on Jun 08, 2010

  • 4793 Answers

SOURCE: Volkswagen Passat rear bumper removal

all the screws/bolts are underneath the plastic cover.hex head.(allen key)

Posted on Jul 12, 2010

  • 76 Answers

SOURCE: i have a 2003 volkswagen jetta. i need to remove

The panels have 3 t20 torx screws on the bottom and one philips head near the mirror. Under pull handles there are 3 philips on the drivers and 2 philips on the passengers sides. Pull the panels from the bottom and lift the panels up. There are 2 black rubber plugs in each door, pop each plug out and the glass is held in place to the clips on each side with either a 10 mm bolt or t30 torx bolt. Move the glass to the point where you can see the bolts, loosen, but don't remove the bolts. Once loose, you can pull the glass loose. Once loose, lower the window a bit, angle the rear of the glass up and pull it out. The glass may be epoxied in place, as VW had a problem with windows coming loose. If so, try to pop the rubber in the clamp loose (above the bolts you see through the holes) and reinstall it with the window removed.

Posted on Jan 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the door panel on the sliding door of my 2013 Volkswagen Routan?


remove the handle by unscrewing the big phillips head screw.
Carefully pry the vents at the bottom of the door
with the sliding door open halfway carefully slide the panel off the door in the direction of the front of the van

Aug 15, 2016 | Volkswagen Cars & Trucks

1 Answer

Key stuck in door


Hi. you will need to remove the handle and strip the door lock. there are repair kits available from the agents to repair thses handles

Feb 01, 2014 | 1995 Volkswagen Polo 1.4

1 Answer

I have a VW Polo 2000. My key is stuck in door lock. It wiil turn slightly but I cannot remove it, so cannot drive car. Please explain how to remove key from the dopor lock slot


open door and look on the end of the door ,their you will find a round rubber cover level with the door handle now remove this cover and undo the torq headed screw ,with this removed you then push the door hangle towards the front of the car and then pull the door handle out complete .now take this to a mechanic who will sort out the door lock for you and renew the appropiate parts with a kit from a auto factor

May 31, 2011 | Volkswagen Polo Cars & Trucks

1 Answer

Replace brake pads on 2007 vw polo


Park the polo on level ground, turn the engine off and apply the parking brake. Pull the hood release handle and move to the front of the car.

Lift the hood and remove the master cylinder. Remove one-half of the brake fluid inside the reservoir with a syringe.

Loosen the lug nuts on the rear wheels with a tire iron. Place the jack beneath the frame at the back of the Volkswagen and lift the back tires off the ground. Rest the rear axles of the Volkswagen on two jack stands. Remove the lug nuts and take the rear wheels off.

Reach behind the brake caliper to locate the caliper mounting pins. Remove the pins with a 12 mm socket and ratchet. Lift the caliper from the brake rotor and suspend it above the wheel assembly with a bungee cord or wire coat hanger.

Remove the rear brake pads from the slots in the caliper bridge. Inspect the caliper bridge and rotor for damage and significant wear. Replace the rotor if it is warped or badly scored. Scoring of the rotors can lead to break failure and will prematurely wear the new brake pads. Place new brake pads into the slots of the caliper bridge.

Attach the piston depression tool to the caliper. The tool will fit over the back side of the caliper and against the piston inside. Twist the tool's handle to force the piston into the side of the rear caliper. Remove the tool once the caliper piston is totally depressed within the caliper.

Replace the caliper onto the caliper bridge and screw in the caliber mounting pens by hand. Replace the rear wheel onto the wheel bolt and screw on the lug nuts.

Repeat the process for the other side of the rear of the polo. Lift the rear end of the vehicle with the jack and remove the jack stands. Lower the rear tires to the ground and tighten the lug nuts with a lug wrench.

Return to the engine compartment. Remove the master cylinder cap and check the level of brake fluid. Place a funnel into the container and fill the reservoir with brake fluid as needed.

Oct 23, 2010 | Volkswagen Polo Cars & Trucks

1 Answer

Remove drives door panel from v.w. polos.d.i.sports


pop the cover of the handle. screws inside there. screws across bottom and dont forget there is one in the front by the speakerpod. pull the bottom straight out towards you and then up.
please rate

Jul 24, 2010 | Volkswagen Golf Cars & Trucks

1 Answer

How do I remove the front interior door panel polo 1400 1999


You'll need a torx bit for the bottom screws. The door handle comes apart (using a screw driver) to expose 2 phillips screws holding the door handle to the door, after you get those out, pop the rest of the push clips out by firmly pulling on the door panel near the bottom, There may also be another screw on the TOP Front (near the mirror) very small phillips. Once you have the door panel loose, lift UP on the door panel to remove. Once you get that panel off, you'll have to remove all the other screws to get the window regulator out (lots of 10mm bolts). Unclip / unconnect the connections etc..

Jun 25, 2009 | 1999 Volkswagen Golf

1 Answer

Tyre pressure


tire pres spec should be in drivers door jam or on fuel filler door. but 32f/40 rear should be ok if booot is full and tires can handle 40 psi

Apr 27, 2009 | Volkswagen Fox Cars & Trucks

2 Answers

How do i remove a door panel from a vw polo match 2001. I have the lock/unlock button to reposition back in its slot as it has been pushed into the door.


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Apr 22, 2009 | 2001 Volkswagen Golf

1 Answer

VW Polo rear Nearside Door Won't Open


If this is a late model polo[2000 upwards].The lock is probably in "safe" mode.Try pressing your remote[lock and unlock] alternatly,while trying to open the door

Jul 30, 2008 | 2003 Volkswagen Golf

Not finding what you are looking for?
2006 Volkswagen Polo 1.6 Logo

Related Topics:

240 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...