Question about 2003 Chevrolet Silverado 2500HD

1 Answer

Put key in,turn key to start position,nothing happens

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

We'll go from the more obvious to more complex:
- Is the battery charged
-are battery terminals clean
- are battery cables tight on ALL connections, including starter, ground
- Do the lights and accessories come on
- when ignition switch is turned to start, is there a clicking sound (this would be the starter solenoid engaging)
-Does vehicle have a security system that when engaged prevents it to start
- Did this problem exist before or did it just appear abruptly.
-check fuses
-put shifter lever in N -try to start( possible bad neutral safety switch)
-

Posted on Dec 30, 2013

Testimonial: "The lights come on and every thing works but when the key is turned to the start position nothing happens,no click,nothing."

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 04 chevy malibu

Simple, free and doesn't hurt anything; Use ONLY your car's ignition key in the ignition - in other words, have NO other keys attached to the ignition key while in use.I had this same problem, increasingly worse (as I added keys to my car key ring). Finally, I seperated my ignition key from my other keys, and so far, no anti Theft problems!

Posted on Mar 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Had to replace the alternator pullie, as the bearing had gone in it, also had to replace the fan belt and power steering belt . Everything has been put back together but now it won't start.Any ideas?


Won't start how ? When you turn the key to the start position does the engine spin or nothing happens ? no crank no start ! Or when you turn the key to start position the engine spins but the engine doesn't start an run ? crank no start !

Mar 27, 2017 | Cars & Trucks

1 Answer

When I turn the key nothing happens. No clicks, no crank. All of the lights work properly. No dimming or turning off when I try to start. This has happened a few times before. The first time I put the car...


Ignition switch....the electrical ignition switch. To verify, find the thick white wire in the harness coming from the switch and do two things; first, check for power at this wire, when you switch the key position to start. If nothing, power the wire momentarily with the key in the run position, and your car should start.

Sep 11, 2013 | 2003 Hyundai Accent

1 Answer

Key turns to "start" position. Nothing happens, key doesn't spring back to "run".


Sounds like the link between the lock cylinder and the switch is broke.

Jun 13, 2013 | 1993 Dodge Shadow

1 Answer

Key turns in ignition but nothing happens


could be alot of things I would start with the battery make sure its fully charged then I would check the silonoid turn the key to on position put a screw driver from post to post on siloniod it could be an electrical problem computer or even a silent alarm I dont know about the malibu but on bmw this is the same thing that happens when the silent alarm is triggered

Dec 22, 2012 | 2006 Chevrolet Malibu LT

1 Answer

My pass key light is on when I try to start car. nothing happens. How do I solve the problem


Put key in ignition, turn to on position (do not start)
Leave in ON position for EXACTLY 10 minutes. As soon as pass light turns off, then IMMEDIATELY start the car.

Sep 06, 2010 | 1993 Cadillac Fleetwood

1 Answer

Wouldn't start. Turned ignition switch. Nothing happened. Interior lights & headlights worked.tried 2 hours later & car started.


Does your security light flash if you turn your key to the 'on' position? If so, this is a Passlock problem. It should restart after 10 minutes. Here`s a possible solution that has worked for me. Have a new key cut from origional key or best condition key you have. Buy some Electronic cleaner and spray lots into the lock cylinder. Then, put your key in the ignition and turn from off to on position several times (5 to 10 times quickly). Then remove your key and spray again and repeat key turning. Do this several times. I don`t recomend any spray that is oil based. I no longer have issues with my Passlock system and I have almost 500 000Kms on my Impala.

Jul 03, 2010 | 2002 Chevrolet Impala

1 Answer

Toyota corolla 98 1.6L unleaded does not start


the alternator ground must be loose... try tracing the both negative and positive... tighten the connection... if problem persists try replacing the alternator

Jul 19, 2009 | 1998 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...