Question about 2005 Chevrolet Uplander

1 Answer

Headlight out, bulb did not fix

Replaced front headlight bulb, still not working...what else could be wrong with the headlight?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Chevrolet Master
  • 1,449 Answers

Check the fuse .check you are getting power on the bulb holders

Posted on Dec 30, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I have a 2007 Chrysler sebring and drivers low beams will not work.


try the fuses or wire fuse links , the only other thing in the circuit is the wires broken or the light low switch is bad

Nov 08, 2014 | 2007 Chrysler Sebring Sedan

3 Answers

Replace headlight bulb


  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
  27. PLS VOTE ME
BMW e46 HID Headlight Replace
replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-0.jpg

replace-headlight-bulb-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 23, 2012 | 2000 GMC Denali

1 Answer

Replacing headlight bulb on 2006 maxima


Hello,

Replacing Your headlight bulb seem to be easy when You look at it, but quite technical. But If You get the proper guide, I think fixing this will not be difficult for You. You will be needing these instruments to fix this(Flathead screwdriver, Phillips head screwdriver, 3/8 inch drive ratchet, 3/8 inch drive 10 mm socket, Replacement bulb(s), Shop rags or towel), then You carefully follow the steps below to fix this:
  1. Turn the steering wheel all the way in toward the engine on the side you are changing the light bulb in. For the driver's side bulb replacement, turn the steering wheel all the way to the right. For the passenger side bulb replacement, turn the steering wheel all the way to the left.
  2. Turn the ignition switch to the off position and remove the keys. Make sure the light switch is in the off position.
  3. Remove the retaining clips and screws from the front of the wheel well area, including the bottom splash shield valance underneath the front of the Maxima. The valance is attached to the wheel well and can be left intact. Use the Phillips head screwdriver for the screws and the flathead screwdriver to pop up the center post of the clips and then pry the clips out. Remove enough of the clips to gain access into the front fender cavity.
  4. Locate and turn the outer low-beam headlight cover counterclockwise to remove it. This will reveal the bulb and socket.
  5. Turn the bulb counterclockwise to remove it from the headlight assembly.
  6. Release the retaining pin (if applicable for theft deterrent package).
  7. Remove the wire harness plug from the bulb socket and then remove the bulb.
  8. Insert the new bulb into the socket without touching the glass of the bulb. Reverse the procedure to reinstall.
But if it is the high beams bulb You want to replace, then please follow the steps below, It is the same instruments as before You will be needing to do this job.
  1. Release the hood latch if you're replacing the high beam bulb only. Then lift the hood. Locate the two 10 millimeter bolts at the top of the headlight assembly and remove them with the ratchet and the socket.
  2. Locate the four fascia retaining pins and remove them using the flathead screwdriver. This will allow flexible movement of the fascia to remove the headlight assembly.
  3. Place a shop rag or towel between the tight gap of the fascia and the bottom of the headlight assembly to prevent scratching the fascia.
  4. Maneuver the headlight assembly forward away from the front of the Maxima. There is a guide pin still retaining the assembly in place so apply equal parts of determination and gentleness to remove the assembly without scratching the lens or the fascia.
  5. Remove the headlight assembly far enough to get your hand behind it and remove the seal from the back of the high-beam headlight. Turn the seal counterclockwise to remove.
  6. Turn the bulb counterclockwise to remove from the assembly.
  7. Release the retaining pin (if applicable).
  8. Unplug the wire harness from the light bulb and remove the light bulb.
  9. Plug the new replacement bulb into the wire harness without touching the glass of the bulb.
  10. Reinstall by reversing the procedure.
Hope this information helped. Thank You for using FixYa!!!

Jan 15, 2011 | 2006 Nissan Maxima

2 Answers

My headlights alternate, the daytime light works on drivers side, low beams work on passenger side and high beams work on drivers side.


These vans use a dual-filament bulb. Replace both headlight bulbs, and it should work normally. The bulbs are removed from the back of the the headlight assembly. There is a locking clip or collar on the back that holds them in, and a wiring harness that clips to the back of the bulb itself. You may need to remove other items to access the headlights. On some vehicles, there are sliding tabs/clips that permit the headlight assembly to slide out from the front when removed. In most cases, these tabs are released by pulling them up. Oil the clips before pulling, as they are usually somewhat fragile, and do not use pliers on them if you can avoid it. Make sure not to touch the glass on the replacement bulbs when installing, or you will shorten their life dramatically. Rubber gloves are recommended.

Nov 25, 2009 | 2002 Dodge Grand Caravan

1 Answer

Right side head light dose not work on lowbeam, bulb was replaced and still doesn't work.


THERE ARE FUSES THAT PROTECT THE HEADLIGHT CIRCUITS. CHECK TO SEE IF THE FUSES ARE GOOD. THIS SHOULD HELP YOU OUT REAL QUICK. THANKS FOR USING FIX-YA AND FOR AN HONEST RATING AS WELL. PLEASE KEEP ME POSTED. GOOD LUCK

May 29, 2009 | 1995 Ford Explorer

2 Answers

Fast Blinker


Usually a fast turn signal means that there is a light out. You should probably check all of your lights, including back-up lights, and turn signals. If there is one out then replacing the burnt out bulb should fix the problem.

May 10, 2017 | 1997 Jeep Grand Cherokee

1 Answer

Lt front turn signal wasnt lit up (the one by the headlight), blinkers on that side blinking faster than normal, bulb looked good but I replaced anyway, still not working. Now I noticed that headlamp not...


You have a short in the front turn signal bulb. The reason it flashes faster is too much resistance due to a shorted bulb. I the bulb was out but not shorted it would flash slower or not at all. To fix this problem replace the front turn signal bulb that does'nt illuminate.

Jan 10, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

2002 honda civic. Headlights won't come on


try replacing both front headlight bulbs. when one blows out the other one will not work. so if you replace both of them they will work

Dec 18, 2008 | 2003 Honda Civic

1 Answer

1986 Volvo 740 turbo station wagon headlight bulb replacement


U will have to play with it and move it back and forth and wiggle it at the same time, other than that I have no easy fix.

Nov 21, 2008 | 1986 Volvo 740

Not finding what you are looking for?
2005 Chevrolet Uplander Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...