- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Someone lose a cellphone? Could be a phone function for call message on the built-in sync. There is a speed alert function for going over a predetermined speed setting. There are traffic alert tones from the Mytouch Navigation. They even have an Alarm clock and interval Alert (every selected minutes). Could be a mileage count to tone after each passing mile.
If it honks once, it is because the alarm was reset. The alarm can be reset by not starting the car within the time allowed (you have about one minute from unlocking the car to starting the car or it re-enables the alarm). It typically does a short beep to indicate that the alarm is re-enabled. If you hear that mini-beep, just press the Unlock button on your remote. Your car will not honk when starting.
My guess is that the designers thought... if the driver unlocks the car and opens the door but doesn't start the car and instead leaves the car unlocked... that it will notify the driver that someone is trying to steal the car. Unlikely. It just makes me frustrated when I hear it.
The alarm started beeping when I was backing up. And then it was also beeping when I had stopped and now it is beeping when I am in drive. This just started happening. I got the car washed at a car washing place, could this have something to do with it?
problem is under the steering wheel,if vehicle has air bag its best entrusted to a garage,if it hasnt then just pull steering wheel off with a special puller and check the carbon brush and the wires and contacts in the steering wheel itself.This is a simple job but without the right tools ???