Question about 1993 Chevrolet C1500

1 Answer

1993 Chevy K1500 4.3 engine 4x4 with 4L60E tranny

How difficult and expensive would it be to put a 350 engine in this truck?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 95 Answers

Not difficult at all, depends which 5.7l you decide to put in it, i would go with 1994-1989.....would cost about $250 and a twelve pack of the tech's choice:) ....Motor and all at normal places for install would cost you about $800-1200 depending on thier labor....My suggestion would be if you dont want to do it yourself, go to you local yokal mechanic hut when they are getting rdy to close, and ask one of the techs if he wants any side work.. odds are he'll say yes and thank you for it....Just takes small fabrictions and wireing harnesss's and diagrams which you can get off the internet.....hope this was helpful to you !

Posted on May 19, 2009

  • Mysticole_20 May 19, 2009

    Not difficult at all, depends which 5.7l you decide to put in it, i would go with 1994-1989.....would cost about $250 and a twelve pack of the tech's choice:) ....Motor and all at normal places for install would cost you about $800-1200 depending on thier labor....My suggestion would be if you dont want to do it yourself, go to you local yokal mechanic hut when they are getting rdy to close, and ask one of the techs if he wants any side work.. odds are he'll say yes and thank you for it....Just takes small fabrictions and wireing harnesss's and diagrams which you can get off the internet.....hope this was helpful to you !

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change tranny fluid 1993 Chevy pickup drive only gear now


You may need a trans shop to take a look. Often times changing the fluid and filter on a vehicle thats over 15 yrs old causes more problems than it solves. Draining the fluid and changing the filter removes particles that were keeping the clutches and bands working. Something could have clogged up one of the ports on the valve body too.

Jun 12, 2013 | Cars & Trucks

1 Answer

Can I put a 1994 Caprice 350 engine into a 1990 GMC 3/4 ton truck ?


yes but it will be difficult. a wiring harness swap will probably be needed since 93-94 were the experimental years for computers. you may need to swap trannys also. i advis you to have fun, the 5.7L chevy is one hell of a hot engine :) its the same one used in corvettes and comaros.

Feb 12, 2011 | 1994 Chevrolet Caprice

1 Answer

350t chevy tranny hisses when I let of throttle when it's cold. it's in a 1978 chevy blazer with a 350 engine


Check fluid level when hot. If ok the flush cooling lines between tranny and radiator. Also check your modulator they are cheep from napa. Difficult for me to duplicate hissing sound on the computer but check your converter for how hot it is after twenty minutes. Last check the vacume line from manifold to modulator..sometimes a small hole can make that noise and effect shifting...hope this helps:)

Sep 07, 2009 | 1983 GMC C1500

2 Answers

93 chevy 1500 4wd trans. shift problems.


See if the tranny has an exterior modulator valve. If so remove the vacuum line and see if there is tranny fluid in the line. It will be located on the pasenger side rear of the tranny. What's happening is the engine is sucking tranny fluid through the vacuum line directly into the intake and it doesn't burn well.

Jun 23, 2009 | 1993 Chevrolet K1500

1 Answer

Wanna know if i can put a tranny for basic 1995 riviera in my Supercharger


you will most probably need a beefed up tranny to take the power of the engine, I have just installed a 350 supercharged chevy motor in my sons car with a Turbo 350 transmission and a shift kit which I have been told by an auto trans mechanic may not take the power of that engine.
It is costing him $1500 australian to have it reconditioned so I hope it will survive the rides

May 10, 2009 | 1995 Buick Riviera

3 Answers

My 1993 chevy van will not shift out of park


is it parked in a steep hill, if so,try to releave some pressure off it,and try to shift it,if not,block wheels so van wont move,inspect shift linkage,if ok,undo linkage from tranny,try shifter invan if it moves ok,if not,inspectshifter and linkange,if its ok,try moving shifter arm at tranny,be careful!if it doesnt move, youll have to take oil pan off tranny and inspect park gear lock.

Mar 14, 2009 | 1993 Chevrolet G20

2 Answers

Buick roadmaster 350 engine wont start


You have checked for spark, Fuel Pressure, Injection pulse? Don't worry it will run. It was made by the General!

Jan 10, 2009 | 1993 Buick Roadmaster

Not finding what you are looking for?
1993 Chevrolet C1500 Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...