Question about Chrysler Pacifica

2 Answers

2004 pacifica keeps blowing fuse for cooling fan

My 2004 chrysler keeps blowing the #13 fuse for the radiator cooling fan

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Chrysler Master
  • 803 Answers

Most likely fan motor over load. Recommend replace and recheck.

Posted on Dec 30, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I need to check my email but, i forgot my pass word. I need to check it as i have used it to get employment.

Posted on Apr 14, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 18 Answers

SOURCE: cooling fan relay placement 05 pacifica

IF YOU OPEN THE HOOD ON THE RIGHT SIDE THERE IS A SQUAR BOX THAT SITS RIGHT NEXT TO THE BATTERY OPEN THAT BOX AND LOOK UNDER THE PART YOU OPEN AND IT HAS A DIAGRAM AND THE NUMBER WHERE IT GOES

Posted on Dec 29, 2008

  • 1024 Answers

SOURCE: serpentine belt routing for 2004 chrysler pacifica

here it is

98c85ed.gif

Posted on Apr 13, 2010

  • 1 Answer

SOURCE: crankshaft position sensor location on 2004 chrystler pacifica

can u please tell me where on my 2004 chrysler pacifica is the crankshaft sensor located?

Posted on Apr 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change the radiator on a 2004 pacifica


Drain the antifreeze or coolant and then remove any parts obstructing the removal of the radiator itself, the cooling fan, etc. Unclamp the top and bottom radiator hoses, remove retaining bolts and remove. Replacement is opposite. Refill unit avoiding air pockets by running heater while car warms up and you are adding coolant.

Feb 28, 2016 | 2004 Chrysler Pacifica

1 Answer

What causes#37 fuse to keep blowing on 2004 chrysler pacifica


The fuse goes to the auto shutdown relay from there it goes to two powertrain control modules. Test the relay or replace or there is a short in the system

Oct 04, 2014 | 2004 Chrysler Pacifica

1 Answer

Change out cooling system radiator


RADIATOR
REMOVAL 1) Disconnect negative cable from battery. 2) Discharge the A/C system. 3) Remove the front fascia.
WARNING: DO NOT REMOVE THE CYLINDER BLOCK PLUG OR THE RADIATOR DRAINCOCK WITH THE SYSTEM HOT AND UNDER PRESSURE BECAUSE SERIOUS BURNS FROM COOLANT CAN OCCUR. 4) Drain the cooling system. 5) Disconnect the radiator fan electrical connectors. 6) Disconnect coolant reserve/recovery hose. 7) Remove A/C lines. 8) Remove the auxiliary transmission cooler hoses. 9) Remove the pushpins and the upper radiator seal.


10) Remove the pushpins and the LH and RH radiator seal (Fig. 20).

11) Remove the A/C condenser side brackets to radiator attaching screws (Fig. 22). Separate the condenser from the radiator by lifting upward to disengage from lower mounts (Fig. 22). Allow the condenser to rest in front of radiator. 12) Remove the upper and lower radiator hoses.

13) Radiator can now be lifted free from engine compartment. Care should be taken not to damage radiator cooling fins or water tubes during removal. (Fig. 21) 14) Remove the auxiliary transmission from the radiator module. 15) Remove the cooling fan assembly from the radiator module. INSTALLATION
1) Install A/C condenser, (if removed). 2) Install radiator fan assemble, if removed. 3) Install auxiliary transmission cooler, if removed. 4) Slide radiator down into position. Seat the radiator with the rubber isolators into the mounting holes provided, with a 10 lbs. force. 5) Install mounting screws. 6) Connect the cooling fan electrical connector. 7) Install the radiator upper and lower hoses 8) In the LH and RH radiator seals. 9) Install the upper radiator seal. 10) Install the auxiliary transmission cooler hoses. 11) Connect the coolant reserve/recovery hose. 12) Install the front fascia. 13) Fill the cooling system. 14) Connect negative cable to battery

Apr 02, 2014 | 2004 Chrysler Pacifica

1 Answer

Fuse for cooling fan keeps blowing


check to see if the fan spins freely if it is sluggish or stuck replace the fan motor as it is drawing excessive current and blowing the fuse.

Dec 29, 2013 | Chrysler Pacifica Cars & Trucks

1 Answer

RADIATOR COOLING FAN MALFUNCTION


maynor be pluggled in properly,why is it getting wet(do you wash the engine at the carwash with it on)is there a coolant leak leaking onto the fan cables/connectors?

Nov 30, 2012 | 2004 Chrysler Pacifica

1 Answer

How does the thermostat fit properly in the housing


selectachapter.gif

Pacifica, 2003-2005
Removal & Installation

Print Here is how to do it,if it does'nt fit right make sure you have the right thermostat.


3.5L Engine


CAUTION Never remove pressure cap with the system hot and under pressure because serious burns from coolant can occur.

  1. Disconnect negative cable from remote jumper terminal.
  2. Drain cooling system.
  3. Disconnect radiator upper hose from thermostat housing.
  4. Remove thermostat housing bolts.
  5. Remove housing, thermostat, and gasket.

    0996b43f80204be2.jpg enlarge_icon.gifenlarge_tooltip.gif

    Fig. View of the coolant outlet connector (1) and thermostat housing (2)-3.5L engine
    View of the coolant outlet connector (1) and thermostat housing (2)-3.5L engine

  6. Clean gasket sealing surfaces.

To install:
  1. Install thermostat and gasket into thermostat housing. For ease of installation, install bolts in housing for thermostat and gasket retention.
  2. Install thermostat and housing to the intake manifold. Tighten the bolts to 105 inch lbs. (12 Nm).
  3. Connect radiator hoses and install hose clamp.
  4. Refill cooling system.
  5. Connect negative cable to remote jumper terminal

May 02, 2012 | 2004 Chrysler Pacifica

1 Answer

Why does fuse # 25 keep blowing out on my Chrysler pacifica 2004


Fuses pop because it is breaking the direct line of voltage that is being selected...anotherwords...instead of when you turn on your radio and the incorrect amount of voltage that is being sent to the radio frys it, the fuse breaks/pops to stop the flow of voltage to the radio.

The problem seems to either be a bad relay or wires are touching somewhere in that system.

Nov 20, 2011 | 2004 Chrysler Pacifica

2 Answers

The cooling fan on my 2006 chrysler pacifica wont blow?


Look under the hood above the battery. In the box are your fuses and relays look for a bad fuse or a bad blower motor relay. If you read the cover you will see there are spare relays in the box just swap them

Nov 02, 2011 | 2006 Chrysler Pacifica

2 Answers

2004 pacifica radiator overheats every couple


A fan is on or off not slow do any fans in your house run slow because they are old?Your thermostat fan or temp sensor is bad

Jun 27, 2010 | 2004 Chrysler Pacifica

1 Answer

Motor fan blowing


do you keep the fresh air button on ? if you do , you will feel heat or cool air come in with out the blower motor running

Dec 01, 2008 | 2004 Chrysler Pacifica

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8266 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...