I have a 2001 kia rio 1.5L engine. I need the info on engine timing to replace the timing belt. If someone can give me the guidance i need, I would appreciate it very much. Thank You [email protected]

The 1.6L (and others) size engines have an "Interference Engine". If the timing belt breaks, severe engine damage results in pistons crushing valves. The timing belt MUST be replaced at regular intervals as outlined in your manual. Did you replace the timing belt in time?

http://www.kia-forums.com/1g-2001-2005-rio/34914-diy-timing-belt-warning-interference-engine.html

I have a 1.5 CRDi which uses the Mercedes engine and has a cam chain not a belt
Check the owners manual the chain doesnt need replacing on any of the service intervals it only requires checking and retentioning

Kia recommended replacement is at 60K. who do you believe?

hi what is the best time belt for kia rio ls 2005 this car in 30000km time belt damege in all cars. i am living in iran i have worry this problrm i not only love this car but also not eny problems for this car. thanks for email
email:[email protected]

The timing belt should be changed around 100,000 miles. I hope this is what you are asking.

Good Luck and please rate 4 thumbs up for the free answer

Yes this is and interference engine and will be damaged if you were driving when the belt broke more than likely.

Click on the following free, direct Link. It has all the Timing Belt Diagrams you will need, complete with Instructional and Directional Diagrams to set your Timing.

Let me know if this helped or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/kia/model/rio/2001_kia_rio_timing_belt_diagram_marks.htm

If it is the single overhead cam engine,it's pretty straight forward-Crank-tensioner- cam.The tensioner is a simple slide-to-tension type.You will need to take off the top engine mount for access(i just supported the engine with a jack)If it's a twin cam?Sorry don't know as mine is single cam.(obviously all air con belts,altenator belt etc have to be removed first)

If you are planning on replacing the timing belt and are not even sure where to find on the engine then please DONT attempt to replace it on your own. Replacing the timing belt requires knowledge of timing marks and tensioner adjustments. It does not simply come off and back on, it has to be aligned up properly with marks on the camshaft and crankshafts. Please leaave this to someone who knows! PS: the timing belt is located behind the plastic covers on the left hand side of the engine (looking from the front)

no it is a totally different hook up