Question about 1986 Chevrolet S-10 Blazer

1 Answer

1991 S-10 Blazer 4x4 4.3

On my 91 S-10 Blazer 4x4 4.3 my 4 wheel drive works great but my light that switches from 2 wheel to 4 high then nuetral to 4 low is stuck in 4 low, How do I get that light working.

Posted by on

  • greyghost319 May 19, 2009

    Sorry... My 4 wheel drive is on the floor.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 95 Answers

You need to pull the switch out of the dash and look behind the swict hfor the actuator, chances are the stud that touchs the actual relay is broken use a pen or something slender and long to push it to the desiref position, other than thats go to a junk yard and look for that switch, should just pop out with a lil prying..

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1984 chevy blazer, i need to know how to put in 4 wheel drive and how to take it our of 4 wheel drive. thank you


full size blazer? if so do you know if you have auto locking hubs on front or manual? the manual will have a dial to turn to lock or free. to shift into 4 high this can be done by just moving the shifter into 4hi at slow speeds. to shift into 4lo need to be in nuetral with vehicle stopped or rolling just a little bit like 1-2mph shift into 4 lo and shift back into drive same when shifting back into 2hi from low range.

Jan 13, 2011 | 1984 Chevrolet Blazer

1 Answer

When drivingtruck in 2 wheel drive the 4 wheel low light will flash and when slow truck down to a stop it will shift into 4 wheel low and will not go back to 2 wheel high


Sometimes the solenoids will stick on the axle neither in 2 or 4 wheel drive, if this problem started when you weren't shifting between two and four wheel drive it is probably the push button switch cluster on your dash going bad

Dec 12, 2010 | 2000 Chevrolet Blazer

1 Answer

4 wheel drive will not engage (1995 S10 Blazer)


I had this same problem a few years ago. In my case I didn't use the 4 Wheel Drive very often and the tranfer would hang in 2 Wheel. I fixed mine by tapping on the transfer case with a hammer while my wife switched back and forth from 2 Wheel to 4 Wheel.

Jun 14, 2009 | 1994 Chevrolet S-10

2 Answers

Stuck in four wheel low


start vehicle, put transmission into nuetral, rotate dial from 4 low to 2 or 4 high. must be in nuetral to change.

Feb 16, 2009 | 2007 Chevrolet Silverado 1500 2WD

1 Answer

Have 2005 Jeep Cherokee


it will be very noticeable in low range verse high range has a big gear reduction so you would notice truck very jumpy and revving high when taking off. if you are having problems getting out of low have vehicle in nuetral when switching sometimes helps if truck is rolling just a little so when you are going about 5mph shift into nuetral and let truck roll flip it into high range will usually hear a clunk from shaft when it shifts

Jan 30, 2009 | 1999 Chevrolet Blazer

4 Answers

1997 chevy blazer wont start


same just happend 2 me,was told it was the neutral safety switch -but didnt start in neutral-took 2 shop 400 later it was the ignition switch runs great again hope i helped

Jan 06, 2009 | 1997 Chevrolet Blazer

2 Answers

1999 chev blazer 4x4 system


I have a 1999 chevy blazer that stuck in 4 wheel drive. How do you get it out.

Nov 23, 2008 | 1999 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

293 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...