Question about 2010 Suzuki SX4

1 Answer

Cruise control will ecm-054lb-0 support aftermarket cruise control?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

Call suzuki and ask. ECU options are HUGE.
you will have to tell them every option on car.
but the question is wrong,
can i put aftermarket cruise on any throttle by wire car?
no... but do call suzuki and ask, and hear them laugh.
or sell you theirs for 2 grand.
TBW , there must not be any interference with the throttle ever
some fail at 1% error.

the ECU is calibrated for cruise and 10x more tightly integrated
with TBW.

Posted on Dec 29, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cruse control on 2008 Chevy Suburban stopped working. Changed the brake lamp switch (twice). Any suggestions? Where is the fuse located?


This is a computer controlled system (BCM) supply's power to switch .Voltage is supplied to the cruise control switch via the steering wheel control switch reference voltage circuit supplied by the BCM.
The following are the main components of the Cruise Control System:
• The accelerator pedal
• The stop lamp switch
• The body control module (BCM)
• The cruise control switches
• The engine control module (ECM)
• The throttle actuator control (TAC) motor
• The vehicle speed sensor (VSS)

Taking your vehicle to a quailfied repair shop would be your best option . Using a factory scan tool to view input data from switches and sensors is the only way to diagnose the cruise control on your vehicle . Just replacing parts does not cut it .

The body control module (BCM) monitors the signal circuit of the cruise control switches. The BCM relays the cruise control switch status to the engine control module (ECM) via the GMLAN serial data circuit. The ECM uses the status of the cruise control switch to determine when to capture and maintain the vehicle speed. The ECM monitors the vehicle speed signal circuit in order to determine the desired vehicle speed. The ECM uses the throttle actuator control (TAC) motor in order to maintain the vehicle speed. For further information on the TAC System, refer to Throttle Actuator Control (TAC) System Description .

This is not a fuse problem !!!!!!!!!

You probably don't know what GMLAN serial data is ,do you ? It's GM 's version of C.A.N. How to Diagnose Controller Area Network CAN

Feb 12, 2017 | Cars & Trucks

1 Answer

2009 Chevy Silverado 1500 cruse stoped working but light is still on.


This is very complex , first thing is have the vehicle checked for DTC'S - diagnostic trouble codes stored in the BCM , PCM !
The body control module (BCM) monitors the signal circuit of the cruise control switches. The BCM relays the cruise control switch status to the engine control module (ECM) via the GMLAN serial data circuit. The ECM uses the status of the cruise control switch to determine when to capture and maintain the vehicle speed. The ECM monitors the vehicle speed signal circuit in order to determine the desired vehicle speed. The ECM uses the throttle actuator control (TAC) motor in order to maintain the vehicle speed. For further information on the TAC System, refer to Throttle Actuator Control (TAC) System Descriptionfor the 4.3L engine or Throttle Actuator Control (TAC) System Description for the 4.8L, 5.3L, 6.0L, 6.2L or 7.0L engines.
Your best bet would be to take to the dealer !
Yo

Oct 24, 2016 | 2009 Chevrolet Silverado 1500

1 Answer

Where can I find the cruise control fuse on a 2008 hhr


The odds of a fuse being the problem with a non operating cruise control are astronomical . Knowing how the cruise control works is a must in trouble shooting . The different modules involved ,the GMLAN serial data network etc... Here is the factory repair manual description .
Cruise Control Description and Operation
Cruise control is a speed control system that maintains a desired vehicle speed under normal driving conditions at speeds above 40 km/h (25 mph). Steep grades may cause variations in the selected vehicle speeds.
The following are the main components of the cruise control system:
?€¢
The accelerator pedal


?€¢
The brake pedal position (BPP) sensor


?€¢
The body control module (BCM)


?€¢
The cruise on/off switch


?€¢
The + RES switch (equivalent to resume/accel switch)


?€¢
The - SET switch (equivalent to set/coast switch)


?€¢
The engine control module (ECM)


?€¢
The clutch pedal position (CPP) sensor, if equipped with a manual transmission


?€¢
The throttle actuator control (TAC) motor


?€¢
The vehicle speed sensor

The body control module (BCM) monitors the signal circuit of the cruise control switches, which are located on the steering wheel. The BCM relays the cruise control switch status to the engine control module (ECM) via the GMLAN serial data circuit. The ECM uses the status of the cruise control switch to determine when to capture and maintain the vehicle speed. The ECM monitors the vehicle speed signal circuit in order to determine the desired vehicle speed. The ECM uses the TAC motor in order to maintain the vehicle speed. For further information on the TAC system, refer to Throttle Actuator Control (TAC) System Description for the 2.2L engine or to Throttle Actuator Control (TAC) System Description for the 2.4L engine.
Ignition voltage is supplied to the cruise control switch from the 2-ampere EPS fuse located in the integrated BCM fuse block. The cruise control function switches are arranged in a resistive ladder design, with each cruise control function switch having a different resistance value. The BCM detects a specific voltage value that is associated with the cruise control function switch being activated. When the normally open cruise control on/off switch is turned ON, the switch closes and the BCM sends a GMLAN serial data message to the ECM indicating that the on/off switch is active. Similarly, when the normally open + RES switch or the normally open - SET switch are pressed, the switch closes and the BCM detects the predetermined voltage signal on the cruise control switch signal circuit. The BCM sends a GMLAN serial data message to the ECM indicating that the + RES switch or the - SET switch is active. The + RES switch or the - SET switch will remain inactive when the BCM has not received the predetermined voltage signal from the on/off switch.
Unless the air bag light is lit too , your best bet would be to take your vehicle to a qualified repair shop.

Aug 09, 2016 | 2008 Chevrolet Chevrolet HHR LT

1 Answer

Where is the fuse for the cruise control on 2010 gmc pickup?


There is no fuse for Cruise Control , power is supplied by the BCM !
The body control module (BCM) monitors the signal circuit of the cruise control switches. The BCM relays the cruise control switch status to the engine control module (ECM) via the GMLAN serial data circuit. The ECM uses the status of the cruise control switch to determine when to capture and maintain the vehicle speed. The ECM monitors the vehicle speed signal circuit in order to determine the desired vehicle speed. The ECM uses the throttle actuator control (TAC) motor in order to maintain the vehicle speed. For further information on the TAC System, refer to Throttle Actuator Control (TAC) System Descriptionfor the 4.3L engine or Throttle Actuator Control (TAC) System Description for the 4.8L, 5.3L, 6.0L, 6.2L or 7.0L engines.
Voltage is supplied to the cruise control switch via the steering wheel control switch reference voltage circuit supplied by the BCM. The cruise control function switches are arranged in a resistive ladder design, with each cruise control function switch having a different resistance value. The BCM detects a specific voltage value that is associated with the cruise control function switch being activated. When the normally open cruise control on/off switch is turned ON, the switch closes and the BCM supplies a ground to the cruise control switch ON indicator circuit as it becomes illuminated. The BCM sends a GMLAN serial data message to the ECM indicating that the on/off switch is active. Similarly, when the normally open + RES switch or the normally open - SET switch are pressed, the switch closes and the BCM detects the predetermined voltage signal on the cruise control set/coast and resume/accel switch signal circuit. The BCM sends a GMLAN serial data message to the ECM indicating that the + RES switch or the - SET switch is active. To engage the Cruise Control System, ensure that the vehicle speed is above 40.2 km/h (25 mph), turn the cruise On/Off switch ON and momentarily press the - SET switch. The ECM will engage the Cruise Control System and record the vehicle speed. The ECM sends a GMLAN serial data message to the driver information center (DIC) in order to illuminate the CRUISE SET TO ### message. The ECM sends a GMLAN serial data message to the instrument panel cluster (IPC) in order to illuminate the Cruise Engaged indicator in the IPC.
If you don't know this I suggest you take your vehicle to the dealer or a ASE certified repair shop .

Apr 07, 2016 | 2010 GMC Sierra 1500

1 Answer

What is wrong 2007 HHR cruise cntrl and auto door lock function stopped working at the same time ?


Automatic Door Lock Operation
This BCM controlled feature can be personalized to driver preference.
The BCM will automatically lock the vehicle doors if the following conditions exist:
• All vehicles doors are closed.
• The ignition is in the ON position.
• The vehicle is shifted out of PARK.
The BCM will then unlock the doors when the ignition is placed in the OFF position. The body control module (BCM) monitors the signal circuit of the cruise control switches. The BCM relays the cruise control switch status to the engine control module (ECM) via the GMLAN serial data circuit. The ECM uses the status of the cruise control switch to determine when to capture and maintain the vehicle speed. The ECM monitors the vehicle speed signal circuit in order to determine and the desired vehicle speed. The ECM uses the throttle actuator control (TAC) motor in order to maintain the vehicle speed. For further information on the TAC system, refer to Throttle Actuator Control (TAC) System Description for the 2.2L (L61) engine or to Throttle Actuator Control (TAC) System Description for the 2.4L engine. Ignition voltage is supplied to the cruise control switch from the 2-amp EPS fuse located in the integrated BCM fuse block.
You should have the BCM checked for DTC'S

Jan 22, 2016 | Cars & Trucks

1 Answer

Got an xj6 1995 3.2, can cruise control be fitted to it? As I have checked throughout the car and see that its all pre-configured by jaguar as my friend has the same car and same year with cruise control...


My experience says "Yes" to adding the factory cruise control set up...you might use your friend's Jag as a great comparison to the needed parts and installation...If you have difficulty locating the factory parts...try a salvage dealer on line...Your model can also be fitted to aftermarket cruise control. Sometimes the aftermarket cruise is less costly, and can be installed by Ziebart or other vendors. You might compare the cost, and the final look. Hope this helps.

Oct 13, 2011 | 1995 Jaguar XJ6

1 Answer

I washed the engine, then cruise control stopped functioning, before that rpm needle went mad and fluctuated from 0 to max on and off. I think there is a short circuit , but don't know where to find or...


If you have an after-market cruise control system, you'll need the specs from the company that manufactured it. Otherwise, it's guess work. Does the Check Engine light come ON when this happens? Whenever the "Check Engine" light comes on, there is always a DTC (Diagnostic Trouble Code) stored in the ECM (Engine Control Module). You'll need an OBDII (On-Board-Diagnostics) scanner to retrieve any codes recorded/set in ECM. See if there's a P0500 DTC. I imagine the cruise control system uses this signal as well as the Speedo.
P0500 Vehicle Speed Sensor Malfunction
The vehicile's speed sensor is on the transmission almost directly below the throttle body
a3b5736.jpg
It is a three pin connector (pin 1=power-12VDC, pin2=ground, & pin3=signal).

72e0f84.jpg

Apr 05, 2009 | 2001 Hyundai XG300

1 Answer

Need pin #'s for ECM module plugs for 1998 Camry 4 cyl


Your pinout .pdf has been sent. Thanks for choosing FixYa!

Nov 26, 2008 | 1998 Toyota Camry

Not finding what you are looking for?
2010 Suzuki SX4 Logo

Related Topics:

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...