Question about Cars & Trucks
Check transmission fluid/filter..add if low change if contaminated..
Posted on Dec 29, 2013
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Loss of power
Do you know how check if every cilinder is working? with the engine in idle, go to the distribuitor cap and carefully unplug one at the time, every cilinder spark plug wire,in the cilinder you dont see a diference in rpm variation, that cilinder is not working, replace spark plug, if you see spark jumping fron the distribuitor cap torch the spark plug wire, another cause to a cilinder fail could be a loss of compression in one or more cilinder
Posted on Nov 02, 2008
to reset the anti-theft, put key in ignition, turn to on but do not start, you must leave in ON position for exactly 10 minutes, once the light shuts off, immediately start car.
Posted on Mar 31, 2009
I don't have one of those vehicles but in the Path Finder it meant Low oil pressure or low oil. If your oil level is correct get the oil pump checked out before the engine is damaged.
Posted on Aug 27, 2009
While engine is running, open the cover where you add oil to engine and see if you see a good flow of oil, if good flow, could be as easy as replacing oil sending sensor. got to realize that if poor maintenance history your engine may not be building enough pressure at iddle to move your hydraulic operated valves, only when you rev it up it will pump enough to run smooth. if running engine too long, you may cause more damage to other engine components such as crankshaft and cam shaft bearings. if you can spare a few bucks, have a good mechanic check your oil pressure with a mechanical gauge. another cheap option is to replace oil pump. last resort if you love your truck as much as we do,replace engine or rebuild it. At 205,000 this is a normal symptom, other than timing chain problems, most engines don't make it that far. hope this helps!
Posted on Mar 01, 2010
hi this problem is caused by a geatbox fault , something is causing the fault code to bring on your warning lights , in this mode the gearbox locks up and the tourqe converter takes up the drive , when you drive of it feels like you only have 3 gear , change the oil and filter in the box and make sure you have the correct level of oil in the box , very important , td5 auto 192k
Posted on Feb 19, 2011
Tips for a great answer:
Apr 08, 2015 | Toyota Cars & Trucks
Jun 23, 2014 | 2000 Toyota Corolla
Nov 28, 2012 | 1993 Jeep Grand Cherokee
Mar 12, 2012 | 2008 Toyota Corolla
Nov 11, 2010 | 2005 Toyota Corolla
May 17, 2010 | 2006 Toyota Corolla
Nov 13, 2008 | 1995 Chevrolet Astro
Nov 13, 2008 | Toyota Supra Cars & Trucks
Jun 23, 2018 | Cars & Trucks
39 people viewed this question
Usually answered in minutes!