Question about 2003 Dodge Dakota Club Cab

Open Question

The dashboard does not work. If you have a plan? Sometimes disconnects or exits. Board rooms DENSO MX457952-8100

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my dashboard odometer not work?


It is working but the display is not. There are resistors on the circuit board that get loose over time. Go to www.regalgs.org and search cluster repair fix. Sometimes reflowing the solder works but sometimes you have to replace the resistors. Your driver information center and the electronic climate control go out too.

Aug 30, 2014 | 2003 Buick Regal

1 Answer

Denso part 471-0315. What is the electrical connection for? Is it just a universal part so it will not be needed for my truck?


There is no info on this site
Just a chat room from home

That is something you can Google to find
or ask at a parts store

Aug 10, 2014 | Cars & Trucks

1 Answer

Reverse Lights no working


fuse board will be on one side of lower dashboard and the fuse board door should have a plan on the inside of what fuse is what , if fuse ok the switch is in engine compartment from gearbox

Mar 18, 2014 | 1992 Honda Accord

2 Answers

Toyota Denso Intelligent Tester II Toyota IT2 support all toyota?


Contact the manufacturer on this, we do not have this information.

Aug 24, 2012 | Toyota Toyota Cars & Trucks

1 Answer

Air-conditioning leaking inside car


  1. Air conditioner evaporator drain hose is blocked. Clear the drain hose where it exits the passenger compartment.
  2. Air conditioner evaporator drain hose is disconnected. Secure the drain hose to the evaporator drainage tray under the dashboard.

Apr 28, 2011 | 2005 Chrysler Town & Country

1 Answer

2002 chrysler town and country my dashboard lights dont work


Fuse blown , poor ground, or power wire to dash module disconnected--Solution 1/check &/or replace fuse 2/ check ground wire to module 3/ Check to see if wire disconnected--very hard to work under a dash board. may have to get technician.

Feb 11, 2011 | 2002 Chrysler Town & Country

1 Answer

Dashboard


Remove the moulding around the dashboard display, remove the screws that hold the display in. The display will pull straight out then you need to reach behind and disconnect the multi plugs. Tilt the display to clear the steering wheel and dash board top. You can replace the circuit board on the back by simply removing the small screws that hold it together.

Apr 06, 2009 | 2004 BMW 5 Series

3 Answers

My dash board guages in my H2 don't come on


My solution to dashboard instrument panel gauges and lights not working was to disconnect negative cable to car battery, then reconnect. After doing so, everything worked.

And the solution to instrument panel coming on and off sporadically may also be a loose battery connection.

From 2005 H2 Lover

Mar 26, 2009 | 2003 Hummer H2

1 Answer

Denso navigation problem


I had the same problem, and then I figured it out. I unhooked the dvd rom opened up the unit and noticed there were resistors on the board which were burned out and the inside of the housing showed slight signs of oxidation. I came to the conclusion that since the unit was mounted in the trunk the unit malfunctioned from water intrusion or moisture, which shorted out the board. Now I'm searching the web to see if I can find a Denso repair facility.

Jan 17, 2009 | 2005 Ford Focus

Not finding what you are looking for?
2003 Dodge Dakota Club Cab Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...