Question about 2001 Mitsubishi Eclipse

1 Answer

How do i unlock my car stereo? Serial #09228390 MR337276

I entered the wrong code 2 unlock my car stereo now it is set in off mode. how do i unlock it and what is the code 4 my 01 mitsubishi eclipse? serial # 09228390 MR337276

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 410 Answers

You should be able to unlock it by unhooking the battery for 5-10 minutes.  When you hook it back up, it should ask you for the code again.  I am not sure about getting the code for you though.  On my Acura the code is on the trunk arm.  You might search there.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Battery was disconnected,How do I enter the code


New Arrival V15 GDS VCI Diagnostic Tool for Hyundai and Kia

Go to Radio and Navigation Codes website if you cannot find your anti-theft radio identification card. Click "Continue" to get to the first page.
Enter your Vehicle Identification Number or VIN when prompted. The VIN is 17 digits and is found at the bottom of the windshield on the driver's side.
Click "Continue" and follow the prompt to enter your phone number and ZIP code. You must enter the phone number and ZIP code that are on file with the dealer. If you haven't changed them, the information is the same as when you purchased the vehicle.
Choose "Continue" and move onto the page to enter your radio serial number. On 2001 and later vehicles, you can find your serial number by pressing and holding the numbers "1" and "6" on your stereo while the vehicle is off. Turn the stereo on and watch for two sets of numbers. The screen will switch between one set of numbers and the second. Each number will start with a letter. Don't worry about the letter and write down both sets of numbers. That is your serial number. For models earlier than 2001, you will have to get the serial number off the back of the stereo. If you don't know how to take the stereo out, you will have to take your vehicle to a dealer.
Enter the radio serial number when prompted. Once you've entered the correct information, Honda will provide you with your radio unlock code. Enter it as directed in the first section.

Oct 10, 2014 | Cars & Trucks

1 Answer

Safe mode car radio


To unlock your VW factory radio from "SAFE" mode, you will need to enter the radio code. Typically, the code is written on a radio card included with the documentation for the vehicle when the car is first sold.

If you don't have the code, or have lost it, you can retrieve it by visiting your VW dealer. You will need the car's VIN number and the serial number of the radio (located on the body of the radio).

The procedure to enter the code is as follows:

Press the "MODE" and "SCAN" buttons simultaneously and hold them until "1000" appears on the radio display. Release the buttons as soon as this number appears.

Refer to your Radio Card and use the station preset buttons ("1", "2", "3" and "4") to input the code. Press the "1" button repeatedly to input the first digit, the "2" button to input the second digit, etc.

Press and hold the "MODE" and "SCAN" buttons simultaneously until "SAFE" appears again. Release, and the radio should be unlocked.

Do not enter the wrong code more than three times, or the radio will lock itself. Note the dealer can also enter the code for you (they may charge a small fee).

Oct 17, 2013 | Volkswagen Cars & Trucks

1 Answer

How to unlock radio from a2001 chey cavalier


see this technique and fix it. God bless you
Instructions
  1. With the Unlock Code
    • 1 Locate the anti-theft/unlock code. Most cars have a special anti-theft radio card that is included with the owners manual packet containing the unlock code and serial number. Some cars also have the code in the car manual or inside the glove compartment. You will need this code in order to unlock your car radio.
    • 2 Turn the car's ignition switch to the "on" position. This turns on your car's electrical system and powers up the radio. The word "CODE" will display on the screen. Note: depending on the manufacturer some radios will display either "ENTER" or "LOC" on the screen instead.


    • 3 Enter the anti-theft/unlock radio code. Press the "Tune" button on your stereo. It will change the screen from "CODE" to blank. Press the button to scroll through the available numbers. When you reach the correct number press the button once and hold it down for a few seconds. The number will appear on the display and you can now repeat the process to input the second number, third number etc., until all of the numbers are in. If you entered the code correctly the car stereo will unlock and instantly become functional. Depending on your car manufacturer, if you enter the code incorrectly you will not be able to re-enter it again from 1 to 24 hours.
    Without the Unlock Code
    • 4 Call your car manufacturer directly. Your car manufacturer's phone number is in your owner's manual. Ask to be connected to the support department. Tell them you need to reactivate you car stereo and you will be asked for proof of ownership. They will need your car's VIN number, the account number from your bill of sale and a form of personally identifiable information like your driver's license. You may need to fax this information. Once everything checks out the manufacturer will give you the code.
    • 5 Enter the code and unlock your stereo. Use the code you received from the manufacturer to unlock and and activate your car stereo.
    • 6 Go to a car dealership. Take your car to its manufacturer dealership to get the stereo unlocked. For example, if your car is a Honda go to a Honda dealership. Once you have proven that you are the owner of the car, the dealership will be able to retrieve the code from the manufacturer and activate the radio for you.

Oct 04, 2012 | 2001 Chevrolet Cavalier

1 Answer

HOW DO I RESET THE RADIO AFTER CHANGING THE BATTERY?


you will need the code to unlock the stereo.
You will probably need to have the radio removed from the dash in order to get the serial number off of it.... but maybe not...
I would call the dealership and ask them what you are required to do to get the code and dirrections on how to enter it...
If you try to enter a random code and it is wrong... your stereo system will lock up and you will have to go thru the ststem reset sequence ( Ignition in ACC for 60+ minutes and enter correct code)

Sep 28, 2010 | 2004 Jaguar X-Type

1 Answer

I need a radio reset code for a 2001 Mitsubishi Eclipse. Radi model MR337276 serial #06179043B for Title 4A3AC54H31E016106. Thank you for your assistance


Your Code is 0642

Input the code by pressing preset 1 to scroll through the first digit, preset 2 for the second digit, preset 3 for the third digit, and preset 4 for the fourth digit.

When you have the correct code displayed, press the CD button to unlock the radio. If your radio does not have a CD button, some use the AM/FM or TAPE button to unlock as well.

Please be sure to rate me if I have been of assistance!

Sep 19, 2009 | 2001 Mitsubishi Eclipse

1 Answer

Door key pad, won't unlock door


  1. Enter the permanent factory remote keyless entry (RKE) keypad code.
  1. Press the 1/2 button within 5 seconds to activate the programming mode associated with the memory position 1 settings. Holding the 1/2 button for more than 2 seconds after activation erases the stored personal code.
  1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 1 settings. Entering any new personal code automatically erases the old personal code.
  1. Press the 3/4 button within 5 seconds to activate the programming mode associated with the memory position 2 settings. Holding the 3/4 button for more than 2 seconds after activation erases the stored personal code.
  1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed and associated with the memory position 2 settings. Entering any new personal code automatically erases the old personal code.
  1. Press the 5/6, 7/8, 9/0, 7/8 and 9/0 button within 5 seconds to activate the programming mode or allow the system to timeout.
  1. Within 5 seconds, enter the new 5-digit RKE keypad code. The door locks lock and unlock to confirm the new code is programmed. Entering any new personal code automatically erases the old personal code.

Jan 23, 2009 | 2005 Ford Freestyle

2 Answers

Stereo unlock code


call dealer with vin number for vehicle and they will provide you with unlock code... good luck

Dec 02, 2008 | 2003 Honda Civic

2 Answers

97 VW Cabrio


If you have the Delta stereo (with the power/volume knob in the middle), you need to hold the "DX" and "FM1/2" buttons simultaneously. Hold them down for a few seconds, and SAFE will be replaced with numbers. Use the radio preset keys (1-4 I believe) to enter each number. When the code is successfully input, hold down the DX and FM1/2 buttons again, and the stereo will start to work.

If you mess up entering the code, you can try again. If you mess up a second time, you have to leave the stereo off and the key turned on in the ignition for an hour to allow you two more tries.

Oct 21, 2008 | 1997 Volkswagen Cabrio

39 Answers

How to unlock my radio (5000 RDS ford) from the LOCK 10


if locked 10 appears:


ensure the radio is off.press and hold preset 6 and switch radio on keeping 6 pressed.the display should change after a few seconds and u can then enter the pin code but i beleive u only get 2 or 3 attempts so make sure u have correct pin or it will need to be sent away to be unlocked

robbie

Jun 28, 2008 | 2003 Ford Focus

1 Answer

Stereo locked in SAFE mode


yes,
turn the switch on all the way without starting the car.
leave it like that for a couple of hours and the it will unlock itself.
that's the " only " way. unless you drive somewhere for a couple of hours

Jun 08, 2008 | 2008 Audi TT Coupe

Not finding what you are looking for?
2001 Mitsubishi Eclipse Logo

717 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...