Question about Land Rover LR3
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Its funny that everyone has solved the problem without any answers to critical questions. In this case, everyone is right and everyone is wrong. ONLY careful testing and observation will determine if there is an actual problem. I do not solve problems just to be first. Even in a hands-on situation I refuse to jump to conclusions before testing, otherwise you run the risk of at best, "chasing your tail" or at worst, tearing into a perfectly good engine to prove nothing!!!
Happy New Year!!!!
Posted on Jan 01, 2009
It often means that you are burning antifreeze. You asked if it needs antifreeze, have you noticed any leaking out of the reservoir tank while you are running it? Sometimes when the head gasket goes it will produce a passage for the antifreeze to pass from the capillaries into the combustion chamber. It is easy to check if you have an air compressor. Remove one of the rear sparkplugs and the radiator cap. Fill the radiator and then push some air into the sparkplug hole (get a good seal in case a valve is open). Repeat with all the cylinders and watch for air bubbles coming up into the radiator. If bubbles come up or fluid is pumped out, the head gasket is blown and must be replaced. It is more likely to happen at the back of the engine because it is farthest away from the fan and therefore gets less cooling. Also check your oil for discoloration. If it is a brownish color it could mean your oil and antifreeze are mixing and has the potential to damage your bearings
Posted on Jan 29, 2009
I would think this will be a blown turbo.
These are fed by a small oil pipe and if the unit overheats (due to wear) - this oil fill feed directly into either the inlet manifold - or the outlet - exhaust.
If it is spilling oil into the hot exhaust - you will get a thick white fog. You can confirm this by placing a clear glass bottle or jar in the exhaust stream - and see if it gets a thick coating of oil on it. If it evaporates - it's water, if not - or feels oily - new turbo or overhaul.
Best get is sortd sooner rather than later - as you may be able to save most of it for an overhaul rather than scrap it if badly worn.
Posted on Feb 04, 2009
Tips for a great answer:
Nov 23, 2016 | Toyota Cars & Trucks
Oct 20, 2016 | Jeep Cherokee Cars & Trucks
Nov 28, 2015 | Cars & Trucks
Jan 13, 2015 | BMW Cars & Trucks
Mar 04, 2014 | 2005 Mazda 3
Oct 05, 2017 | Cars & Trucks
Mar 09, 2011 | 2006 Chevrolet Colorado
Nov 07, 2017 | Land Rover Cars & Trucks
123 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: