Question about 2004 Hyundai Santa Fe

1 Answer

Whe is the fuel cutoff valve , located on my 2004

Where is the fuel cutoff valve , located on my 2004 santa fe ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 710 Answers

THE TWO MOST COMMON LOCATIONS ARE ON THE PASSENGER SIDE FRONT KICKPLATE UNDER THE GLOVEBOX. OR IN THE REAR OF THE VEHICLE NEXT TO THE JACK AND TIRETOOL. I HOPE THIS HELPS YOU. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK

Posted on May 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Does a 2008 Hyundai santa fe have a fuel cutoff switch


189565_dsc04698_1.jpg


this shows a 2004 santa fe fuel cut off switch ,2008 could well be similar

May 18, 2014 | Cars & Trucks

1 Answer

Santa Fe fuel cutoff switch


The fuel cutoff switch is located on the drivers side strut tower next to the brake master cylinder. press down on the top rubber part and you should hear a click.

Dec 11, 2011 | 2001 Hyundai Santa Fe

1 Answer

Where fuel pressure regulator located on a 2004 Hyundai Santa Fe. I have checked the fuel pump, and blown out the lines, but there still is no pressure at the fuel rail.


Are you sure the fuelpump is good,even a bad regulator you should still have fuel preasure,the regulator if its not part of the pump should be on the fuel rail,

Jun 21, 2010 | 2004 Hyundai Santa Fe

2 Answers

Where is the fuel filter?in santa fe 2004


FUEL FILTER IS WITH THE IN TANK FUEL PUMP.

Mar 25, 2010 | 2004 Hyundai Santa Fe

2 Answers

Where is the purge valve located on a 2004 santa fe?


You have not responded CLEARLY!... which ENGINE?

Oct 30, 2009 | 2003 Hyundai Santa Fe

2 Answers

Where is the fuel filter located


It is located in the fuel tank.

Aug 16, 2009 | 2004 Hyundai Santa Fe

1 Answer

Unable to fill the gas tank when the car is sitting level


These fuel tanks are designed weird, they have a hump in the middle for the driveshaft. Most of the time I have found if the pump clicks off early it is the fuel vent valve, which is located on the rh side, but a fuel cut valve could do the same thing. If the pump clicks off early (sometimes after 1 gal), make sure the canister filter isn't clogged and replaced the vent valve.

Apr 26, 2009 | 2004 Hyundai Santa Fe

3 Answers

2005 Hyundai Santa Fe won't start after fueling


After change fuel pumps per diagnostics still had problem with starting after fueling. Researched on-line and kept seeing purge control valve as solution. Mechanic didn't think it would do anything but filled up three times now and so far so good. part was $49 and he was nice enough not to charge for labor

Apr 06, 2009 | 2004 Hyundai Santa Fe

1 Answer

Car won't start right away after refueling


I just fixed a similar problem on a Toyota Corolla. I'm not certain if your car's EVAP system setup is the same, but this could resolve your problem as well. Your car may have one or both: A refuel check valve, and/or a fuel cutoff valve. Generally these are located off of the fill tube, but the cutoff valve may be mounted on the fuel tank. 01e0b34.jpg
The problem occurs when your fuel tank is overfilled and/or gas flows into the EVAP line. The gas is too high in the filler neck thereby causing fuel to flow into the charcoal canister. A defective refuel and/or fuel cutoff valve would cause this problem. The cutoff valve prevents fuel from flowing into the canister, and the refuel valve helps to trigger the gas pump to stop.

Test refuel check valve (if installed) by blowing air from larger to smaller port. Air should not flow freely and the valve should open as pressure increases. Air should flow freely when blowing from smaller to larger port. Replace valve if it fails either test.

Test the fuel cutoff valve by holding it upright, as installed on car; air should flow freely. Turning upside down should prevent airflow. Also, fuel present in the check valve may indicate the tank was over filled meaning you possibly have fuel in your charcoal canister.

Is your engine warning light on? For the Toyota, code P0441 "Incorrect Purge Flow" was present. Just replacing a defective valve may not get rid of the code. It's possible that your charcoal canister was saturated with gasoline too so that may need to be replaced. I also heard of a situation where the fuel tank was contaminated and had to be cleaned.

Replacing the cutoff valve solved my problem. Good luck! Related Link: http://www.2carpros.com/forum/1998-toyota-corolla-vt190664.html

Mar 14, 2009 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2004 Hyundai Santa Fe Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...