Question about Cars & Trucks

Open Question

Euro tech ma 66 front loader washing machine


Posted by on

  • Lavina Ross
    Lavina Ross Dec 29, 2013

    Hi Lavina Ross, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?



Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I replaced the bearings in an LS front loader washing machine. After five loads its knocking.

Is the washer level both front to back and side to side. This could be causing the washer to knock. Also make sure you are not over filling the washer

If you need further help, I’m available over the phone at

Mar 22, 2018 | Cars & Trucks

1 Answer

Amana washing machine top loader , the lid is locked due to a power failure

Hi, try looking at the service manual / service manual which I have managed to find below:

Amana Top Load Washer Service Manual

Hope this helped :)

Oct 20, 2016 | Cars & Trucks

1 Answer

What is this Chevrolet Engine block number what did it come out of the engine is chevy the number at front looking left is V0328CMA any Help out there

MA 1958283H.D. m/t1602trucks MA 1963283Powerglide1752trucks MA 1967327manual trans.2102Camaro MBit was made in Engine assembly plant: V= Flint, Michigan.
Engine was assembled in March, day 28.
We are sorry but we did not find engine assembly code "CMA" in our database. Please double check it and try again. the c designates car --- ma is engine /hp and trans
NastyZ28 com Chevrolet Decoding Guide the link helps break down the prefix code because would need more info as to exactly what engine yr and hp are MA 1958283H.D. m/t1602trucks---- MA 1963283Powerglide1752trucks---- MA 1967327manual trans.2102Camaro and this is big block MBMA 1969Chevrolet427335Mt
NastyZ28 com Chevrolet Decoding Guide

May 26, 2016 | Chevrolet Cars & Trucks

1 Answer

Case moves forward and backward no lift on loader

Hi James:
The forward and back comes from the transmission,
The loader is from the hydraulic accessory drive.
On my old Case it is a Cessna pump located at the front of the engine, driven from the crankshaft.
The first thing to check is to see if you have had a hydraulic failure. Pool of fluid under machine?
Then check the reservoir to see if there is adequate flouid in it.
Then check the pump and drive for failure.
It is also possible that the linkage from your loader control has become disconnected. Let's hope that's what it is as that's the easiest to repair.

Sep 05, 2015 | Cars & Trucks

1 Answer


Make, mode, year?

US car? Europe?, pro center, tech info, owner maunal, fuse chart in index

Sep 12, 2011 | Ford Explorer Sport Trac Cars & Trucks

1 Answer

The rear A/C line is leaking on my envoy and I'm being told it is very expensive to replace. Can I remove and plug this line and only have front A/C?

they can compression fit repair the line not necesasry to replace

try a few little ma pa shops they do old schol repair like that

newer shops like clean easy big ticket replacments so their tech get hours and $$$ you can repair anything ... but what do I know I am and old mechanic but old and honest ...just not rich :) who cares my conscience is clean

Jun 11, 2010 | 2004 GMC Envoy

1 Answer

Headliner install in 66 mustang coupe

Remove windshield and rear window to do it properly. Headliner is actually crimped in between window gaskets and roof edge. Not a job for the faint at heart. If you don't know the string trick to get your gaskets in place you'll be working on it this time next year. Look on CJ Pony parts web site. They used to have a good tech article on headliner replacement. Hope this helps...

Feb 22, 2010 | 1966 Ford Mustang

1 Answer

Brow nliquid coming from drum at back machine and

If this is a front loader, you may have lost the drum main bearing (or will shortly). If so, this is a major teardown to fix.

Nov 10, 2009 | Cars & Trucks

1 Answer

Reliable Volvo shop/mechanic in Littleton/Acton, MA Area

there is a very good volvo shop on cliff street in Worcester. He has all the factory soft ware to repair volvos and his employee is a Master Volvo tech

Aug 26, 2009 | 2001 Volvo S80

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

80339 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15190 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides