Question about 1993 Toyota Camry V6

2 Answers

1993 camery 1993 toyota camery on the dashboard showing a car back light illuminated i changed  all the bulbs but it didnot fix the problem 

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. The light has a detector/sensing module that often goes bad. The issue for me at the moment is the location of the module. I believe it is located under the dash not to far from the instrument cluster. I do not think it is a short in the wiring system, if it is then the lights won't come on and the fuse(s) would have popped. Hope this is helpful?

Posted on May 25, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Open the trunk lid and check the wiring in the loom along the driver side hinge. it may be necessary to peel back some of the loom , but you will probably find a broken or chafed wire in this section, if not check all the ground wires between the brake and backup lights.

Posted on May 20, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tail lights work but not brake lights 93 toyota camry

The brake light side of the bulbs is powered by the brake switch and travels thru the turn signal switch.
If the third brake light works, I would guess the problem is in the turn signal switch.

Jul 02, 2012 | 1993 Toyota Camry

1 Answer

I have same problem, inoperative dash lights. Fuses have been checked mult times-no problem. Light bulbs OK. So, what next?

Check position of dome light off/on timing switch. If in between "On" and "timed" position, dashboard led light does not get power, thus not illuminated.

Jun 17, 2012 | 2004 Toyota Corolla

1 Answer

Dashboard light out

Yes it can be a fuse, the dash illumination and the tail lights are on the same fuse, check the fuse on the inside fuse panel at the left lower dash, the fuses are marked on the cover, look for the "tail" fuse and try replacing it, if that doesn't fix it let me know.

Feb 27, 2012 | 1997 Toyota RAV4

2 Answers

Dashboard and shft collum lights on a 97 toyota corolla

Your local parts dealer usually have books you can purchase or browse thou, they generally are very helpful when it comes for me to fix one of my autos, some bulbs and fuses can be tricky to locate and replace. Hope this is helpful if not contact us back please.

Nov 09, 2011 | 1997 Toyota Corolla

1 Answer

Dashboard lights do not illuminate Toyota Lucida

Check the dimmer wheel or knob. I do not have the specifics for this model just a general idea. Check fuses first with a test light. Let me know if I can help more. Thanks.

Jun 11, 2009 | 1993 Toyota Previa

1 Answer

Taillight failur switch

did you look in the trunk hinge left side where the wires go into the backseat area of the trunk

Mar 16, 2009 | 1993 Toyota Camry V6

1 Answer

Dashboard lights on 2000 camery going out from right to left. Are there bulbs that can be replaced or is it a printed circuit?

it could be the bulbs, but also could be different fuses as well. they can be replaced but the dash may have to be taken apart for this.

Feb 23, 2009 | 2000 Toyota Camry

1 Answer

Toyota Camery rear light warning light indicator on.

If your sure ALL of your bulbs are good(front and rear)then your bulb check relay is bad its usually in the trunk area,hope it helps have a good dayDB

Feb 16, 2009 | 1997 Toyota Camry

1 Answer

2003 toyota camery

The control panel is held in by 4 clips, one at each corner. You need a long, flat tool, preferably hard nylon, insert it at the bottom corners & pry backwards, ther clips will release, and you then pull the top towards you to release the 2 top clips. The bulbs are on the back of the control assembly. Don't use a screwdriver, it will damage the material around the panel.

Oct 14, 2008 | 2008 Toyota Camry

1 Answer

Dashboard light on car with rear lights on.

This can be caused by fitting the wrong bulb in your brake lights. Typically a single fillament bulb in a twin ~(Stop and tail) holder. It causes the brake light current to back feed into the sidelight system thus illuminating the dashboard.

Simply fit the correct bulb to cure the problem.


Jul 29, 2008 | 1993 Toyota Previa

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides