Question about 2004 Audi A6

1 Answer

2004 audi A6 flasher lights

Hazard lights stay on don't flash signal lights won't flash triangle light on dash stays lit how can I fix this problem
Thanks

Posted by on

  • Anonymous Mar 27, 2014

    tractionlighton the dash stay lit,is that normal?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,586 Answers

You need a new hazard light switch - the relay for the hazards and turn signals is built in. It's $40 or so at a dealership to buy a new one.

Posted on Jun 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flashing indicators on my audi a3 dont flash but stay on constant


change it. most likely contains the flasher for turn signal also

Jun 03, 2014 | Audi A3 Cars & Trucks

1 Answer

Turn signals not working, Toyota Tundra 2000


Hazards work only when lights are off. Left signal light stays lit on the dash and does not blink and is stuck on (lit up) when lights are lit. If I place hazards on while lights are on only right side flashes and whole dash lights flash too... I replaced the flasher relay and it still does not work. Suggestions anyone? Thanks!

Apr 30, 2012 | 2000 Toyota Tundra

1 Answer

My turn signals and my Hazard Lights stays on but dont flash problem?


FLASHER device go to bad, replace it in order to solve.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Dec 28, 2011 | Cars & Trucks

3 Answers

I have a 1995 chevy cavalier and the turn signals just stay on and don't blink. I have changed the flasher and the multi function switch and still no luck


First, is it doing it on BOTH isdes or just on one side? Example: turn signnals flash OK when turning left, but only come on and stay on when turning right. If it is doing this, then you most likely have either a blown bulb or a bad bulb socket on the side that is not flashing. You need to check both the FRONT and REAR bulbs to make sure they are all functioning properly.
If it is doing it on BOTH sides, then you either have a bad flasher, or at least 2 bulbs burned out (one or more on each side).

Are you sure you replaced the correct flasher? The flasher for the HAZZARD lights is plugged into the convinience center under the left side of the dash. If this is the flasher you replaced, it is the wrong one.
The turn signal flasher is mounted to the driver's knee bolster bar near the steering column. It is held to the bar with a clip. (see diagram)

9_25_2011_3_20_38_pm.gif

Sep 25, 2011 | 1995 Chevrolet Cavalier

1 Answer

Turn signal not blinking . Stays lit bit no


It could be your flasher relay going out. Should be under the dash.

Jan 06, 2010 | 1998 Audi A6

1 Answer

Hi The Indicator lights on my A6 stay on


Which indicators? You mean the turn signals? If so it's your hazard relay - built into the hazard light switch. Get a new one at the dealer or from www.ecstuning.com, change it out, and you should be good to go.

Nov 13, 2009 | 2004 Audi A6

1 Answer

My blinkers won't work, the light just stays on (not blinking) do I need to replace the flasher? Where is it? The hazards work. It's a 2003 Audi A6


The relay is built into the hazard switch. It could be that or the turn signal switch. Try the hazard switch first (it's relatively cheap). If that doesn't do it, you'll have to replace the turn signal switch, which involves removal of the steering wheel and airbag.

Oct 31, 2009 | 1999 Audi A6

1 Answer

Indicator lights stay on perminently


its the signal switch on the colunm NOT the hazard switch

Apr 13, 2009 | 2004 Audi A6

1 Answer

Signal lights stay on


Its common for the sockets to burn up.  If you installed and the lights are still coming on.  The issue is the hazard light switch is bad.  If it were me I would replace the burnt socket anyway since it has been damaged and replace the hazard lite switch too.

Mar 19, 2009 | 2000 Audi A6

2 Answers

Signal lights stay on


The flasher relay, which is actually part of the hazard switch, must be replaced. You have to pry off the trim piece around the hazard button and remove the switch/relay for replaceing. Note that the trim can be difficult to remove and the relay/switch is also tough to get out.

Feb 04, 2009 | 2001 Audi A6

Not finding what you are looking for?
Cars & Trucks Logo

892 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14363 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...