Question about 2006 Chevrolet Trailblazer

1 Answer

P0014 engine code

Where is the camshaft position actuator valve located on the 2006 chevy trailblazer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 462 Answers

THE CAM SHAFT ACTUATOR IS LOCATED IN THE CYLINDER HEAD ON THE FRONT RIGHT HAND SIDE JUST ABOVE THE POWER STEERING PUMP. AFTER YOU REMOVE THE ACTUATOR CHECK TO SEE IF ANY OF THE SCREENS ARE DAMAGED OR MISSING. IF SO REPLACE THE ACTUATOR. ALSO CHECK THE CRANKSHAFT END PLAY. IT SHOULD BE BETWEEN 0.0044" - 0.0153". if excessive crankshaft end play is causing this concern, it will be obviously out of specification by as much as.050" or more when a pry bar is used to move the crankshaft back and forth. IF THIS IS THE CASE AN ENGINE REPLACEMENT IS RECOMMENDED DUE TO THE AMOUNT OF DEBRIS IN THE ENGINE. IF NO EXCESSIVE CRANKSHAFT MOVEMENT NOTICED REPLACE THE CAM ACTUATOR. IT WILL ALSO BE NECESSARY TO DO AN OIL CHANGE.

Posted on May 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0014 Diagnostic code, already replaced camshaft actuator & oil twice


code p0014 - Chevy TrailBlazer, TrailBlazer SS and GMC Envoy Forum

forums.trailvoy.com > ... > OEM Issues

Sep 8, 2007 - 11 posts - ‎8 authors
On my Trailblazer I have a code P0014 . this says Camshaft Position Actuator B ... If the desired and actual cam phase angle error exceeds its ... This diagnostic procedure supports the following DTC: ... replace the camshaft actuator solenoid, change the engine oil and filter, ... 2004 Chevy TrailBlazer LT P0014 - Camshaft Position Actuator Solenoid "Relearn"
11 posts
Dec 11, 2009
cam crank sensor mismatch
11 posts
Jul 4, 2009
More results from forums.trailvoy.com

Tech Code "dtc P0014" 2003 Trailblazer - Chevy S-10/Blazer ...

www.gm-trucks.com/.../72278-tech-code-dtc-p0014-2003-trailblazer/

Dec 31, 2007 - 14 posts - ‎6 authors
Tech Code "dtc P0014" 2003 Trailblazer - posted in Chevy ... it had been serviced before for the same thing in 2003 or 2004! ... replace the camshaft actuator solenoid, change the engine oil and .... The extended war. co. prob. would not be to happy since they already fixed the sensor once or twice already.

Replace a Camshaft Position Actuator Solenoid Valve on a ...

? 8:05
https://www.youtube.com/watch?v=4Dkdd287AKg

Jan 11, 2016 | 2004 GMC Canyon

1 Answer

Trouble code P0014 06 trailblazer


P0014 Chevrolet Description
The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module. The control module sends a pulse width modulated 12-volt signal to a CMP actuator solenoid. The solenoid controls the amount of engine oil flow to a CMP actuator. The CMP actuator can change the camshaft angle a maximum of 25 degrees. The control module increases the pulse width to accomplish the desired camshaft operation
Possible causes
- Dirty Oil
- Low engine oil level
- Faulty Exhaust Camshaft Position Actuator Solenoid
- Exhaust Camshaft Position Actuator Solenoid harness is open or shorted
- Exhaust Camshaft Position Actuator Solenoid circuit poor electrical connection
- Faulty Engine Control Module (ECM)
There may be a service bulletin for your vehicle.

Read more: http://engine-codes.com/p0014_chevrolet.html#ixzz3CDQXLaqj

Sep 01, 2014 | 2006 Chevrolet Trailblazer

1 Answer

Not working right


code p0014 refers to camshaft position(CMP) actuator . exhaust /right /rear bank 1--timing over advanced/system performance===causes valve timing--engine mechanical fault--CMP actuator . If you have done no work on the engine then I would be replacing the exhaust cam actuator (CMP actuator)

Nov 17, 2013 | 2002 Oldsmobile Bravada

2 Answers

Code p0014 exhaust and code p0015 exhaust


The code P0014 is for Camshaft Positon Sensor Actuator Bank 1. The possible causes are incorrect camshaft timing, wiring problems (harness/wiring) in intake timing control valve solenoid system; continuous oil flows to VCT piston chamber or failed timing valve control solenoid(stuck open).
The code P0015 is for Camshaft Position -Timing Over-******** (Bank 1). Your problem will probably be that the timing will be slightly out, due to wear (stretch) of the timing chain; this will all be linked to the overall cold start issue and the timing position. Get that timing checked, or push for the full fix for the cold start timing issue.

Jul 25, 2013 | 2007 Mini Cooper

2 Answers

Obd code p0014 on isuzu ascender 2006


Its a cam over-retarded code.

I believe this is a rebranded chevy trailblazer. I would start with an exhaust cam actuator which is located right next to the power steering pump. 90% of the time this will fix the problem. If it does not than it is possible there is an issue with the timing chain or a PCM issue.

Jan 26, 2013 | 2005 Isuzu Ascender

2 Answers

What is code p0014


P0014 : Camshaft Position Actuator

Dec 19, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

I have an 2006 Pontiac G6 with 4cyl and automatic. I got a p0014 camshaft position actuator B-bank 1, timing over advance. could it be the sensor or do you think the timing belt needs to be replaced?...


hi, this is due to oil pressure send to the exhaust camshaft position sensor,, before u change this sensor or checking engine timing,, change the positon of sensor a to sensor b and check the dtc if it is still p0014, if other dtc will send to ecmit means that the sensor is the problem, if P0014 still the code, you may now check bank 1 timing

Jul 27, 2010 | 2006 Chevrolet Trailblazer

1 Answer

P0014 code and the cruise will not work


DTC P0014 Exhaust Camshaft Position (CMP) System Performance.

The cam phasing system is a hydraulically actuated phase shifting mechanism. The powertrain control module (PCM) supplies the ignition positive driver and ground circuits. A pulse width modulated (PWM) driver controls the amount that the camshaft actuator solenoid assembly advances or retards the exhaust camshaft. The exhaust camshaft is commanded to a maximum ****** position of 25 degrees. When the exhaust camshaft is retarded at the maximum rate, the duty cycle of the signal is at 100 percent. The maximum advance rate has a 0 percent duty cycle. Other than when the camshaft is at full advance, a 50 percent duty cycle is used to maintain a steady ****** angle.

Remove Cam Phaser Solenoid and inspect it to ensure that all 3 screens are intact. Chances are you will need to replace this Solenoid and change the oil immediately.

Feb 24, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

P0014 Engine code is up.


The Camshaft Position Actuator Solenoid Valve is probably restricted with carbon deposits. This is usually caused from going too long between oil changes, or using substandard oil and filters.

Replace the Camshaft Position Actuator Solenoid Valve and change the oil (5w30) and filter.

Disconnect the battery cables and touch them together, then re-connect them to clear the code.

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

Apr 03, 2009 | 2006 Chevrolet Trailblazer

Not finding what you are looking for?
2006 Chevrolet Trailblazer Logo

2,115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...