Question about 2000 Pontiac Grand Am GT

1 Answer

Flasher switch keeps clicking after the switch is turned off

I replaced the flasher switch but the flasher relay keeps clicking fast when the switch is turned off from either the 4-ways or the directional switch. The lights are not flashing but the relay is clicking away. It also comes on by itself without touching anything. No lights just clicking! This was also what was going on with the old switch beside the intermittent lights working.
I have the grand am se2.
thanks
nseg

Posted by on

  • tony
    tony May 11, 2010

    did you check the fuse

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 47 Answers

Check the switch in the colum that works all of that it might of melted and you have wire shorting out in there if so replace plug and probly a couple bulbs if there burnt out

Posted on May 18, 2009

  • nseg1 Dec 28, 2013

    The directional switch inside the column had dirty grease across all the contacts. The metallic dirt came from years of use. Cleaned out dirty grease and put in new di-electric grease. Been fine ever since

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I fix both turn signals flashing very fast (looks on all the time when selected on) on my '91 Toyota camry?


this is usually a sign that the flasher relay needs replacing,these are usually located behind the drivers kick panel , you can locate it whilst the flashers are turned on , just feel which relay is clicking

Mar 09, 2015 | Toyota Cars & Trucks

2 Answers

Turn signals and Hazard no longer work


Fast clicking is caused by a higher than normal current being applied. Normally a short or a aftermarket relay that requires less current to switch. Sounds like the entire multifunction switch is bad.

Mar 20, 2014 | 2000 Dodge Stratus

1 Answer

Cant find the turn signal relay switch on a 87 buick somerset


It should be up under the dash, usually close around the steering column. The turn signal flasher and the hazard flasher may look the same. If you turn on the hazard lights, you should be able to locate that flasher-it will be clicking, and if you hold a finger lightly on it, you can feel it working. That may help you find the turn signal flasher-often they are close together.

Jan 28, 2014 | Buick Somerset Cars & Trucks

3 Answers

1994 Chevy C1500 truck. No rear brake lights


Most likely this is a brake light switch issue. Replace switch.

If your emergency flashers don't work, all flasher bulbs are fine, but flashing too fast, then check and replace Hazard light switch.

Oct 29, 2012 | 1994 Chevrolet C1500

1 Answer

Turn signal flasher relay


If your relay switch is working fine and the ground wires are good, I could replace the flasher device (isn't expensire replacement) and test again, if the fault come on again, the multifunction switch is go to bad.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 01, 2012 | 1998 Ford Explorer

1 Answer

Hi I have a problem with my 1998 4 Dr Blazer V6 Automatic. The turn signal flasher will not stop flashing. I replace the flasher relay and the problem got better but it flashing intermittently. You can...


You'll need to replace the turn signal multi-function switch. It is grounding the white feed wire from the flasher when it is not supposed to. This is a really common problem with these. I have heard of people cleaning the switches with electrical cleaner and having that work as well.

Sep 24, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

I have a honda accord 92 my turning signal it keeps clicking eventhough im not making a turn and its cliking fast i checked the fuse and there're ok... `do you think what the problem might be???


Since they are still clicking, the flasher unit is probably OK which narrows the problem to either a relay with welded contacts (the cover for them should have a diagram showing which one) or the switch assembly at the steering column has disintegrated.

Apr 17, 2010 | 1992 Honda Accord

2 Answers

Turn signal is constantly clicking without turn signals on. Sometimes fast sometimes slow, just on it's own it starts clicking


It's more than likely to be the multifunction switch , the contacts get dirty and cause the flasher to continue to click . The flasher and hazard switch are one unit behind the dash , that's why you hear the sound from there.

The next step would be cleaning your multifunction switch. Clicking it into place wears away at it, leaving metal shavings in the grease surrounding parts. When enough metal accumulates, it likes to short and constantly complete the circuit.

Good luck and keep me posted, this was a recall and the fix was to clean the grease used, and or replace the unit.

Feb 08, 2010 | 2004 Pontiac Grand Am

1 Answer

Hazard light switch clicks all the time very fast?


You need to replace the flasher relay. I am not familiar with the Saturn Vue, but the flasher unit is usually located either under the dash adjacent to the steering column or fuse block. I would look under the dash while the flashers are on. If the relay is bad you should be able to locate it by the clicking sound that it will be making. A replacement unit can be purchased at an autoparts store. Take the old one with you for reference. Hope this helped and best wishes.

Aug 31, 2009 | Saturn Vue Cars & Trucks

Not finding what you are looking for?
2000 Pontiac Grand Am GT Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...