Question about Chevrolet Silverado

Open Question

Trailer brakes not working on 2014 chevy silverado

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: brake lights do not work

Have you checked both bulbs , also check closely on all the fuses. if you have to, use a test light and probe all fuses on both sides of the fuses

Posted on Apr 24, 2009

  • 1 Answer

SOURCE: Only the left rear trailer light comes on when I apply the brakes.

I had the same problem with my 2002 Silverado last summer when I first bought my boat and was getting the trailer ready to go. Like an idiot, I rewired the boat trailer on that side before I decided to look at the owner's manual. The pickup has separate fuses for right and left side of trailer. They're located in the big box in the engine compartment. I replaced the 10 or 15 size fuse and haven't had a problem since. Hope this helps!

Posted on Apr 26, 2009

  • 2 Answers

SOURCE: where does electric trailer brake harness plug into under dash

You have to go to the dealer and purchase a harness that will plug in by the fusebox underneath the driverside dash. From there you can wire in your electric brakes

Posted on Aug 01, 2009

  • 521 Answers

SOURCE: Brake lights on a 2003 chevy silverado 2500HD wont work.

same bulb but 2 seperate elements. wiring diagram u should be able to obtain from your local auto parts store like autozone(preferred)

Posted on Sep 23, 2009

  • 18 Answers

SOURCE: 2001 Chevy Silverado. When I plug in the trailer

its in the engine compartment in the fuse box on the drivers side next to battery

Posted on Oct 07, 2009

Testimonial: "This guy knew what he was talking about"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2006 chevy 2500 HD the trailer breaks don't work


the braking system is not installed a the factory just the wire from the plug to the fire wall you need to add the fuse and control box

Apr 21, 2012 | 2006 Chevrolet Silverado 2500HD 2WD

1 Answer

2004 Chevy silverado 1500. Brake and turn ok on truck, but right brake voltage not getting to trailer plug. right turn signal works at trailer plug.


The flasher module sends voltage for the trailer brake and turn signal on the same circuit. If you have right turn signal than we now that the fuse and wiring are good which leaves the module.

Do you get the same result if you turn on the four way flasher?

The module is located under the drivers side of the dash. You will need to remove the trim panels to gain access.

I can give you more info if you need it.

May 10, 2011 | 2004 Chevrolet Silverado

1 Answer

1999 Silverado 1500: does my chevy 99 1500 come with trailer brakes...


if its set up for trailers with brakes, it should have small black box under the dash above the pedals; if there is one you can adjust the brake timing to syncronize the trailers brakes with the trucks; if there is not one you can purchase one and mount it and run a few wires

May 17, 2010 | 1999 Chevrolet Silverado 1500

1 Answer

Trailer wiring


Have you checked the fuse box under the hood? There are seperate fuses for the truck lights and the trailer lights. If the fuses look good use a 12 volt test light to check for power on the turn signal pins when the brake is pushed. The brake lights and turn signals use the same wires to work. Power here would indicate the wiring and fuses on the truck is all good, meaning the trouble is on the trailer. Check the bulbs to be sure they are the correct ones, they should be dual element bulbs. Make sure you have a good ground on the trailer, usually the white wire in the 4 way plug is grounded to the trailer frame, do not depend on the trailer ball to be the ground, this is asking for trouble.

Apr 06, 2010 | 2001 Chevrolet Silverado 1500

3 Answers

2001 Chevy Silverado. When I plug in the trailer


its in the engine compartment in the fuse box on the drivers side next to battery

Oct 07, 2009 | 2001 Chevrolet Silverado

1 Answer

Chevy trailer brake problem


Check under hood fuse box make sure L. trailer light fuse isnt blown.

Aug 05, 2009 | 2005 Chevrolet Silverado

2 Answers

Where does electric trailer brake harness plug into under dash


what are you asking? how do you get the lights to hook up to the back of your truck? you may need a pigtail connector to hook the trailer up and have it work properly.

Jul 30, 2009 | 2004 Chevrolet Silverado 2500HD

1 Answer

2003 Chevy PU Brake Lights


check the bulbs and make sure the socket is not rusty or dirty

May 25, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...