Question about 2004 Nissan Quest

Open Question

Lug nut torque 2004 nissan quest se - 2004 Nissan Quest

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 30 Answers

SOURCE: replace control panel on 2004 nissan quest

there is a c-clip you need a small screwdriver to pull it out then gearshift knob will pull off

Posted on Jan 28, 2009

jimboz4
  • 305 Answers

SOURCE: how to take off tire pressure light off on nissan quest 2004

remove the tire pressure light fuse from fuse-box....this should work

Posted on Jul 23, 2009

  • 1 Answer

SOURCE: Battery drains in my 2004 Nissan Quest

I have the same problem on my 2004 Nissan quest, and the battery will die if i do not drive it for 3-4 days, i have replace a ACdelco ACD24F60 new battery and it has the same problem too. I just get a Nascar advantage charger Model 11-1577-6 from Canadian tire, and try to recharge it but the LED flash after few hour, I set to normal battery type, any idea how to fix this problem. thanks.

Posted on Feb 14, 2010

ftw1952
  • 10319 Answers

SOURCE: Radio Code for a Nissan Quest 2004

http://www.radio-code.com/

Posted on Sep 06, 2010

  • 7 Answers

SOURCE: Reprogram my 2004 Nissan Quest keyless remote w/sliding door

it diddnt work

Posted on Nov 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lug nut torque chart


Here's a handy link to the wheel nut torque settings for hundreds of different vehicles.
Look your's up........and away you go!
http://www.discounttiredirect.com/infoCenter/infoWheelTorque.html

Jul 30, 2014 | 2004 Pontiac Montana

1 Answer

Wheel lug nut torque foot pounds


85-115 is what the manual says. Most people do 95 to be on the safe side.

Jul 16, 2014 | 2004 Jeep Grand Cherokee

1 Answer

Yes i have a 00 model nissian quest van. 3.3 v-6 motor i cant find nobody who knows what the mains and rods torque at. i put a new crankshaft in the van and dont know what to torque the rods and mains at....


main bearing cap bolts: tighten them in three steps, in sequence, to 67-74 ft. lbs. (90-100 Nm).

rods: Lubricate the threads with new engine oil and install the nuts, using the following procedure:
  1. Tighten the nuts to 10-12 ft. lbs. (14-16 Nm).
  2. Using a torque angle meter, tighten the nuts an additional 60-65°. If a torque angle meter is not available, tighten the nuts to 28-33 ft. lbs. (38-44 Nm).
  3. f0abf0a.gif

Oct 05, 2010 | 1994 Nissan Quest

1 Answer

1998 Buick Riviera Lug Nut torque specifications


I think only walmart torques the lug nuts for lawsuits, I have never torqued a lug nut in my life, and probably never will, But I think just about as tight as you get it with the lug wrench will do, do not use an impact driver, you will never get the thing off by hand. The torque setting is not hat much, maybe 25 lbs? I'm guessing. Hope this helps.

Sep 05, 2010 | 1998 Buick Riviera

1 Answer

Broken lug on rear passenger wheel. How do


TAKE VECHICLE TO A TIRE REPAIR SHOP LIKE SEARS OR OTHER TIRE SHOP IN YOUR AREA.THEY CAN PRESS STUD OUT OF BEARING WITHOUT DAMAGING IT AND PRESS IN A NEW ONE WITH NEW LUG NUT.

Jun 07, 2010 | 2005 Nissan Quest

2 Answers

Tire won't come off


Kick the tire part hard,over ,and over again.Use some pb blaster spray on the wheel lugs,and around the center of the wheel where it touches the hub.Kick it some more.

Dec 20, 2009 | 2004 Nissan Quest

1 Answer

What should be the right torque for the lug nuts on a 2004 jeep g


110 ft/lbs should do the job nicely

Hope this helps,
Sherwin

Dec 20, 2009 | 2004 Jeep Grand Cherokee

1 Answer

2004 nissan quest 3.5 SE, the engine sounds like a 1967 Volkswagon Bug. This just started. I think its a Gasket, your thoughts.


Check that all cylinders are firing.Do this by pulling and replacing one plug leed at a time and if the idling doesnt get any worse after pulling any of the leeds off then you know that perticular cylinder is not fireing

Aug 06, 2009 | 2004 Nissan Quest

1 Answer

2001 NISSAN QUEST VIBRATION


THE ORIGINAL VIBRATION MAY HAVE BEEN TIRES.IF THE LUG NUTS WERE NOT TORQUED BY HAND BUT OVERTIGHTED W/AN AIR RATCHET THE ROTORS MAY HAVE BEEN WARPED.TAKE IT BACK TO WERE THE TIRES WERE INSTALLED AND ASK THEM TO CHECK IT OUT.

Apr 30, 2009 | 2001 Nissan Quest

Not finding what you are looking for?
2004 Nissan Quest Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

723 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...