Question about 2005 GMC Envoy
Seating in the drivers seat , make sure all doors are closed.Insert key into ignition, don't turn on yet.
Wait for the dome light to go out, then press and hold the door unlock button , make sure it is UNLOCK, while turning the key ON OFF ON OFF Twice , do not engage the started, just on to the point of being on. Release the unlock button,and your doors should lock, then unlock indicating programming mode.At this point hold down both the lock and unlock button on the key fob. After 30 seconds your locks should lock and unlock, indicating the fob is programmed. This must be repeated for all remotes, whether or not it be new or old. After all remotes are programmed, turn the key off and on again to exit programming mode.
Posted on Dec 14, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
my GPS in my legacy is not working . i have get tin it recalibrate it and it works for about 15 to 20 mints then it goes crazy again. at one point it showed the car driving in the water when i was on the 287 west. how do i fix this ?
Posted on Oct 02, 2009
one, five, three, six, two, four
The plastic intake should have this sequence molded into it somewhere, and even the corresponding cylinder numbers in front of their respective holes. Have fun, and thanks for posting on Fixya.com
Posted on Mar 20, 2009
Close all vehicle doors, LOCK doors using drivers side switch.
Insert key all the way into the ignition, (do not turn) remove key.
Repeat this step 5 times. (6 total)
Hazards should flash to indicate program mode.
Press any button on transmitter to be programmed, hazards should flash to indicate successfull program.
*For additional remotes, cycle drivers door lock UNLOCK, LOCK, press any button on remote, hazards should flash. Repeat step as necessary.
Ignition ON, (engine off) ignition OFF, UNLOCK using drivers side switch, test remotes.
Posted on Aug 06, 2008
Not 100% sure about Suzukis but on my ford the same happened to me and I had to program them at the same time. Hopefully this helps.
Posted on Jan 19, 2009
SOURCE: remote keyless entry not working
KEY FOBS FOR THIS MODEL MUST BE PROGRAMED USING A TECH 2 SCAN TOOL SO IT MUST BE DONE AT THE DEALERSHIP FOR ABOUT HALF HOUR LABOR HOPE THIS HELPS
Posted on Mar 28, 2009
Tips for a great answer:
Nov 01, 2015 | Cars & Trucks
Jul 29, 2014 | GMC Envoy Cars & Trucks
Jul 20, 2017 | 2005 GMC Yukon
Jan 04, 2013 | 2005 Nissan Sentra 1.8
Nov 01, 2012 | 2005 Mazda 6
Sep 15, 2010 | 1995 Buick Regal
Aug 06, 2010 | 2005 Chevrolet Corvette
Aug 01, 2008 | 2005 GMC Envoy
1,265 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: