Question about 1992 Ford Crown Victoria

1 Answer

Car won't shut off

Replaced ignition lock, it's ok. Checked fuses in power distribution box, they are good. With original ignition switch I can start car and run. When you turn the key back to off, car continues to run. When I put new switch in I could'nt start car.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 532 Answers

That happened to me years ago,so i may not be acurate on this but try this anyways...check the wires between the starter solenoid - aternator - and wiring whip to the vehicle,i think its a single light gray wire you would be looking for.check to see if its broken or shorted out...this info may not be right where to look,but i know its in that area.

Posted on May 20, 2009

  • D Coyle Oct 21, 2011

    plastic toothed strip bad in steering column

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 99 Jimmy GMC when u hook battery up I can not get power to itintion switch fus box r inside if car period battery is good I mad sure of that


Do you know how to read a wiring diagram ? Go here http://www.bbbind.com/free_tsb.html free wiring diagrams . Enter your vehicle info - year , make , model , engine etc... Under system click on electrical distribution , then under subsystem click on power distribution .Then click on search , six blue links will pop up , click on them one at a time . See where ignition switch gets it's power . The ignition B fuse 50amp located in the under hood fuse box, supplies B+ voltage to the ignition switch .Plus Ignition C an ignition A fuse's also power ignition switch .

Mar 13, 2016 | GMC Cars & Trucks

1 Answer

Power locks interior lights radio not work


between the main power board under the bonnet and the fuse box inside the car is a problem what? i have no idea but check for power to the fuses inside the car then if no power theri you have a main fuse blown under the bonnet in the power distribution box and work backwards using logic to find the fault

Feb 27, 2014 | Kia Cars & Trucks

2 Answers

Car turns over but won't start fuel injector fuse and ignition fuses are good but no power is getting to them. also the stereo and wipers only work when ignition is on accessory. when its on r


Sounds like it could be a bad ignition switch-the electrical part, not the lock cylinder. When key is in the on position (run), those fuses should be powered. Are all the maxi-fuses good? They distribute power throughout the car's electrical circuits-like the fuse panel, for instance, so check the maxi-fuses. If good, probably the ignition switch is bad.

Apr 03, 2013 | 1997 Pontiac Grand Am

1 Answer

92 plymouth voyager wont start and nothing work the windows wont go down the lock and unlock button does nothing idk what the problem is i had the battery tested and the battery is fine what would cause...


Nothing works? How about the headlights, do they work? If yes, then start checking all fuses in the Power Distribution Center or Box under the hood. If no, then look for a bad maxi-fuse in the PDC, and check for a bad fusible link between the battery and the PDC. The battery positive cable goes to the starter, but a pigtail lead off the positive would go to the PDC, to distribute power to all the various circuits on the car.
When you turn the key to on, does the dash light up? If yes, at least power is getting to, and going through the ignition switch. One could then check for power on the starter solenoid wire when key was held in crank or start position.
If nothing when turning key to on-no dash lights, nothing-then check for an ignition fuse in the PDC. If fuse is good check for power being available at the ignition switch connector. If no power there, check wiring between PDC and the ignition switch-if power is up to the switch, but nothing happens with key on, no dash or warning lights, then could have a bad ignition switch.
It just sounds like a maxi-fuse has blown, or a bad fusible link. Good luck.

Mar 18, 2013 | Cars & Trucks

2 Answers

ENGINE WON'T TURN OVER WHEN I TRY TO START ALL POWER TO WIPERS AND RADIO IS GONE STARTER CHECKS GOOD REPLACED IGNITION STILL NO POWER TO STARTER CHECKED ALL FUSES ALL CHECK GOOD THIS IS A 1994 QUE


Assuming the engine is not locked up, can you crank it in neutral ?
There is a neutral safety switch in the circuit that could have failed.
There are also two relays in the circuit that would need to be checked.

Feb 17, 2013 | 1994 Nissan Quest

1 Answer

Start then not start,no power to inestion or starter ,then start and run a while shut it off then wont turn over again


It may be a bad ignition switch, that or a loose or bad electrical connection somewhere. Check for corroded terminals in the power distribution box near the battery. If no help, you may need an electrical diagnosis of the ignition circuit and the ignition switch.
When it won't respond, do lights and other accessories work? If no, it's a main power problem near the battery or distribution box. If yes, it sounds like the ignition switch or the wiring from the switch to the starter or to the ignition system.

Oct 23, 2012 | Chrysler Town and Country Cars & Trucks

1 Answer

1991 Honda crx won't start


Try tracing the wires and looking for a worn spot in insulation that is grounding out, its a royal pain but might be the only solution, use wire prob and test areas where inaccessible. good luck

Jun 09, 2012 | 1991 Honda CRX

2 Answers

Crankup and drive get some place and shut it off them sometimes wont restart till it cools. checked relays battery alternater all is good what is wrong ?


If your starter won't turn over after driving and shutting the car off, sometimes, it sounds like your starter is getting stuck/overheating. Replace your starter and this problem should go away.

Oct 08, 2011 | 2003 Saturn ION

1 Answer

We replaced the relay switch, put in new fuel pump and filter. we tried to start it again and it just cranks but won't start. we checked the fuel pump fuse and it seems to be ok.....Don't know...


If the initial problem was that the vehicle would shut itself off at any speed, and that the dashboard would go black, then have the ignition switch checked, NOT the lock itself, but the cabling attached to it and that connects to the fuse box. This ignition harness is prone to failure, and can produce a problem similar to the one you describe. The part itself is about $100 or less, but it is difficult to install. Keep me posted.

Aug 22, 2011 | 1998 Honda Accord

1 Answer

Re:follow up ignition problem. checked fuses under hood all look good can not tell if relays are good.


is the vehicle trying to start, and won't, check out the start relay located in the power distribution box.

Apr 18, 2011 | 1994 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...