Question about Ford F-250
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if you replaced fuel pump i would look at backward wiring when replaced and i would start at the source of work if your vehicle was working fine before replacement then 9 out of 10 it will be your fuel pump wireing
sometimes when putting wireing back together the connectors have the missing clip and in turn you can turn the wireing in both directions now where positive is touching the ground on both sides of connector kris kross problem check your work this is crucial use a test light to find the right wires where they go
Posted on May 26, 2008
SOURCE: fuel pump fuse blowing
replace the fuel pump, it is drawing to much current, this is common when the pump bearings get worn out, also make sure you replace the fuel pump connector at the fuel tank connection, it will be burnt..
Posted on Jul 02, 2009
The GRAY wire i believe going to the fuel pump is the hot wire it should come on for 2 seconds with just the key in the on position this is were you should check voltage for 2 seconds then it will go away until you crank the truck.Your oil sending unit is behind your distributor that could be the cause .
Posted on Aug 01, 2009
Tips for a great answer:
May 14, 2017 | Ford F-250 Cars & Trucks
Aug 12, 2015 | 1999 Mazda 626
Mar 31, 2014 | 2001 Ford F250 Super Duty Super Cab
Aug 19, 2012 | Cars & Trucks
Aug 05, 2012 | 1999 Chevrolet Prizm
Sep 18, 2009 | 1999 Dodge Neon
46 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: