Question about 1999 Dodge Caravan

1 Answer

Po605 and po700

I have a 2002 dodge neon and the engine light came on. i scan for errors and i got a po605 internal control module read only memory (rom) error the other code is po700 Transmission control system malfunction. what do i need to replace? is it just a module or the transmission

Posted by on

  • Anonymous Mar 14, 2014

    put scanner on it came up with internal control module read only memory rom error

  • Anonymous Mar 14, 2014

    scanned it showed internal control module read only memory rom error

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

P0700 is a generic trans. code, so the problem if it is in the trans. would require further trans diag. so i would scan trans specific codes first. but in most cases when a chrysler tells you it is an internal controller fault you can believe it. just make sure which controller it is telling you has a fault!

Posted on May 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine light on did tune up still on


Hi.

As said previously the engine light keeps turning on because a fault has been detected. The light will stay on until the problem is fixed. After fixing the problem the light will go off using a scan tool to reset the main computer module or keeping battery terminals disconnected long enough to reset the module's memory. The code reading's result will help you to locate the problem. A code scanning can be done for free at the nearest Autozone or for a small fee at the dealer place or at any qualified garage.

Regards.

Ginko

Dec 15, 2011 | 2002 Dodge Neon

2 Answers

Can you tell me what the codes PO605 and PO700 are? PT Cruiser 2001


P0605-------- Internal control module read only memory (ROM) Error
Have the computor checked.
P0700-------- Transmission control system
Better take it to a transmission shop and have that checked so they can pinpoint the problem.

Aug 27, 2011 | 2001 Chrysler PT Cruiser

2 Answers

2002 Dodge Neon, approx 99,000 miles, engine light came on, error code PO605 & another error code related to transmission, auto transmission - driving anything over 25 mph won't "kick up"...


Its the TCM- Replace the Transmission Control Module. WITH THE DRBIII PERFORM QUICK LEARN AND REPROGRAM PINION FACTOR.
The transmission Control Module (TCM) is located behind the passenger fender and is fastened to the frame rail forward of the suspension. Here is a picture of it...

michael_cass_533.jpg

Aug 02, 2011 | 2002 Dodge Neon

1 Answer

I have a 2001 Chryler Concorde with a 2.7L engine. The engine light came on a gave me 2 codes... PO700 and PO605.. Can you help me by telling me what i can change?


P0700 indicates the transmission control module has a code in it. That code is P0605 which indicates a TCM internal memory error. While the TCM would probably be the leading suspect you can't rule out other possibilities like corroded connections, etc.

May 10, 2011 | Chrysler Concorde Cars & Trucks

1 Answer

Recently my check engine light came on and I did a diagnostic to find a P0607 error to appear. The code had read something about a power train control module. I will probably end up taking my car into the...


P0601 Internal Control Module Memory Check Sum Error
P0602 Control Module Programming Error
P0603 Internal Control Module Keep Alive Memory (KAM) Error
P0604 Internal Control Module Random Access Memory (RAM) Error
P0605 Internal Control Module Read Only Memory (ROM) Error
P0606 ECM/PCM Processor
P0607 Control Module Performance
P0608 Control Module VSS Output "A"
P0609 Control Module VSS Output "B"
P0610 Control Module Vehicle Options Error
The p0607 error says Control Module Performance. It has something to do with the Control Module for the powertrain as you indicated. But, you may be able to take your car to a transmission shop to alleviate the problem using a transmission expert.

I don't think that it doesn't have anything to do with the engine, itself, even though it's listed under a driveability related code.

Good luck on this repair.

Jan 14, 2011 | 2002 Dodge Stratus

1 Answer

Tranny not shifting, check engine light on W/code PO605 and P1793 reset light code PO605 came back



Trouble Code: P0605

Internal TCM Error
Possible Causes:


PCM needs to be replaced, and then reprogrammed

Nov 04, 2010 | 2002 Dodge Neon

2 Answers

Where is the internal control module at on a 2002 dodge neon code # P0601


Internal Control Module Memory Check Sum Error,
check with a dealer for any technical service bulletins from chrysler, you might have to have the computer reprogrammed rather then replaced

Dec 03, 2009 | 2002 Dodge Neon

1 Answer

Po650


P0605....Internal Control Module Read Only Memory (ROM) Error, replace the PCM.

Oct 08, 2009 | 2002 Chrysler Town & Country

2 Answers

Won't shift into high gear


po700 is the code in the pcm,telling you there is a code in the tcm( trans control module) po605 is a internal tcm error replace and program the trans control module

Sep 01, 2009 | 2002 Chrysler Town & Country

1 Answer

Po605 internal transmission tcm mulfunction dvd


Do not walk, RUN from that repair shop. A PO605 reading is "PCM read only memory test error". There is no way a problem in your DVD player would result in a "check engine" light. Take the van by Autozone, Advance Auto, Pep Boys, O'Reily's or other retail store and have them run the fault codes on the OBD-2 computer to find out why the light is coming on. If you are having trouble with the DVD player, go by a stereo/video shop.

Mar 05, 2009 | 2002 Chrysler Town & Country

Not finding what you are looking for?
1999 Dodge Caravan Logo

1,431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8140 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...