Question about 2008 Pontiac G6 Sedan
Running rough and engine light comes on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 1991 Pontiac Sunbird
The codes you are giving are not complete... if you used an obdII you should have letters along with code.. check full fault code and go from there..
Posted on Aug 24, 2008
sounds like you have a vacuum leak, check all the vacuum hoses and replace any broken or kinked ones, also check around the intake manifold gasket for leaks. any air leaks after the air flow meter creates 'un-metered' air which inturn will make the car run rough and stall, hope this helps
Posted on Apr 04, 2009
SOURCE: 2003 pontiac vibe- #10 fuse blows---check engine light on, runs rough.....windows, speed gauge, dash board lights, a/c control vent/blower and turn signals do not work code that comes up is speed sen
Well, if a mechanic on-site can't find the problem, you probably need a technician trained on Pontiac or GM systems.
Automotive systems today are so complicated and diverse, I couldn't even hazard a guess, and I've worked on cars and trucks for over 30 years. Us shadetree mechanics have just about seen our waterloo. Sorry, Denise.
Posted on Mar 31, 2012
Tips for a great answer:
Mar 13, 2014 | Mercury Grand Marquis Cars & Trucks
When the service engine soon light (Also called the check engine light or engine management light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.
Oct 11, 2012 | Pontiac Sunfire Cars & Trucks
Mar 22, 2012 | 2003 Pontiac Vibe
Nov 20, 2010 | 2005 Pontiac Sunfire
Jul 29, 2009 | 1999 Pontiac Grand Am GT
Jul 04, 2009 | 1985 Pontiac Sunbird 4 Door
May 27, 2009 | 2004 Pontiac Bonneville
Apr 24, 2009 | 2000 Pontiac Firebird
Dec 30, 2008 | 1999 Chevrolet Silverado 1500
18 people viewed this question
Usually answered in minutes!