Question about Seat Ibiza

Open Question

Cant open drivers side door on my seat ibiza from the inside and out.

Handles on my seat ibiza aint workin on the drivers door.inside and out.must b a way to open the door from inside the door

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 43 Answers

SOURCE: Drivers side door handle won't work

Some linkage maybe broken on the door handle. Door panel removal instructions are availablel on line but determining the problem will have to be found on your own.

Posted on Nov 13, 2008

  • 1114 Answers

SOURCE: door handle 1996 thunderbird

sounds like a plastic Sir clip of course you say external handel detached from door consider linkage clip has fallen down!

Posted on Dec 23, 2008

  • 36 Answers

SOURCE: driver's door won't open

The problem is the door latch, you can use sawsall to cut the door stricker off this way you can open the door and replace the latch

Posted on Jan 04, 2009

  • 226 Answers

SOURCE: diver side door will not open with door handle (outsidedoor )

There is a small clip that holds the outside door handle arm (inside the door) to the latching assembly, so the door panel has to be removed to reattach it. Sometimes the little clip is still attached to the handle arm, sometimes they are in the bottom of the door & sometimes you can't find them at all... Rick

Posted on Apr 13, 2009

  • 1986 Answers

SOURCE: 2000 lx 470 driver door panel

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Door handles need replacing. Cannot open door. How do you get the door open?

Neither inside or outside work? then you have to remove the seat to get the panel off. Two bolts in back/bottom of seat to remove, most likely torx. Pull the seat and get it out of the truck or on the other side. You will need the room the get the panel off. Screws to remove the panel are in the slot in the arm rest and at the door handle, then the panel pops off. Once off, reach inside and release the door at the latch. Just a note.... I don't think yours is one of them, But some Fords have screws around the out side of the panel. In that case, you will have to destroy the panel to open the door.

May 09, 2015 | 2003 Ford Explorer Sport Trac

1 Answer

How to remove seat ibiza 2001 door panel as window won't close properly and grinding

door panels are held on by screws in the arm rests , winders ,door handles and around the outside by push in plugs under the trim. There is a flat bladed tool that you insert between the trim and the door and twist and this pulls the plugs out of the door. When everything is disconnected (with the window down ) lift the whole door panel up of the top of the door.

Jul 14, 2014 | 2000 Seat Ibiza

1 Answer

Drivers door not opening from inside

There will be a pull wire from the inside handle back to the door latch. They are held in normally by a plastic clip that is prone to getting brittle and crackig off letting the wire fall out of the latch. You will probably have to remove the door trim and you see what I am talking about.

Feb 07, 2013 | 2006 Seat Ibiza 1.4

1 Answer

Opening mechanism inside front door not working - How do I get door open?

Parts are available at a salvage yard. Getting the door open is going to be your problem "unless" you pull the seat out and have room to take door panel off to open the door with the mechanism manually.

Sep 11, 2012 | 2000 Toyota Sienna

1 Answer

97 Mercury Mountaineer driver side door won't open. Outside handle flops around; inside handle won't open door

Try a slim jim first, down the side of the window. Or AAA or locksmith. If no luck, remove the seat first. Find the screws and bolts around the door handle and arm rest. Most Ford's have screws around the outer side of the panel. I don't believe your's does. The panel lifts or pops off. Once the panel is off, you can reach down and open the door. Just a note. I have done some to where the panel came out in pieces.

Mar 14, 2012 | 1997 Mercury Mountaineer

1 Answer

I just obtained a 1989 Cadillac Deville...The drivers door wont open....Locks go up and down...trying to open it form the outside...there is no tension in the handle or from the handle inside either......I...

if you remove the cover that is behind the inside door handle and look you may see the arm that connects to the handle.if its connected then you will have to remove the inner door panel,if its come off the handle and you get a hold of it you can pull on it and the door should have to be patient to remove the door panel with the door will need to remove some screws to loosen the panel from the steel door inner panel.(arm rest,cover behind the handle).pop up the power door/window switch control and remove the plug attached.pull out the inner door panel to unhook the clips around the outside edge of the panel,you will have to move the seat to get better access to some,then remove the panel and reach into the inner door and move the unlock arm to open the move have clips that are broken that allowed the arms to come off that need replacing to fix the problem.

Jul 16, 2011 | 1989 Cadillac Sedan DeVille

1 Answer

Need to know how to remove electric window motor unit and cables for "001 Seat Ibiza passaenger door from 2nd hand door (bought from scrap yard) and replace in my car. On 4 bolts but hidden and to...

remove the big panel that holds it all together then drill out the pop rivits for the cable and bars ,new cables for this vehicle are about 15 euros as they are sold seperatly ,dealer will want to sell you the complete panel .megapennies

Sep 04, 2017 | Seat Ibiza Cars & Trucks

1 Answer

Locking problems seat ibiza 2000 1.4s

How I fixed the central locking seat ibiza 2001

Sep 01, 2009 | 2000 Volkswagen Golf

1 Answer

1996 gmc suburban driver side door, inside door handle not workin

take your door panel off and see if the rod is off that goes to the door latch

Jun 14, 2009 | 1999 GMC Suburban

2 Answers

Drivers side door handle won't work

Some linkage maybe broken on the door handle. Door panel removal instructions are availablel on line but determining the problem will have to be found on your own.

Nov 12, 2008 | 2000 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Seat Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

80531 Answers

Adam Truesdale

Level 3 Expert

528 Answers

Are you a Seat Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides