Question about 1992 GMC Sonoma

1 Answer

How do I replace Serpentine belt on 92 gmc Sanoma.

Don't know which bolts to loosen to remove belt. I replaced before but can't remember.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 116 Answers

Should just have to turn the tensioner and pull belt off alternator pulley, release tensioner ,remove belt. install new belt, apply tension to tensioner and put belt back on alt. pulley.will require 1/2 in ratchet or serp. belt tool.

Posted on May 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 4.0l. how can I replace fan belt?


Your vehicle has a "tensioner" under the hood as a separate pulley for the serpentine belt to ride on.
If you want to see a picture of it, go to "e-bay" and type in "92 Explorer belt tensioner."
You will need a socket and a long bar, or a box-end wrench that is long to put on the bolt that is holding the pulley on.
You will rotate that pulley to loosen the serpentine belt to be removed.
You will also do the same to put on the new belt.
You may find they help of another person will be good.
God bless your efforts.

Oct 13, 2015 | Ford Explorer Cars & Trucks

1 Answer

'92 cutlass ciera 3.3 belt tensioner assembly replacement


your belt has to come off the ensioner should have one bolt to loosen

Jan 22, 2014 | Cars & Trucks

1 Answer

Removal of serpentine belt on 1994 Jeep Grand Cherokee


Below is the master help link provided to go through belt routing diagram:---Timing belt, drive belt, serpentine belt, accessory belt, fan belt, engine belt routing diagrams for all types of car models?
Click the link below: ----

http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help. Thanks.

Jan 27, 2012 | 1994 Jeep Grand Cherokee

1 Answer

How is the best way to replace a serpentine belt on a 2005 kia sorento


First remove the engine plastic cover by removing the bolts that hold in. Then loosen the nuts at the front of the AC Belt and Power Steering Belt. Now use a Socket set and loosen these two belts by turning the tension adjustment bolt, Anti-Clockwise.

You have to remove the first two belts (AC & Power Steering) before reaching the Serpentine Belt.

Now loosen the nut on the front of the lowest pulley before loosening the serpentine belt.

To loosen the serpentine belt, you could either remove the metal skid plate at the bottom of the engine by turning the tension adjustment bolt, Anti-Clockwise or reach down from the top and loosen it with the socket set ( quick & easiest)

Sep 13, 2011 | 2005 Kia Sorento

1 Answer

Replace alternator belt


  • Locate the two belts on the left side (passenger side) of your Mitsubishi Lancer. The outer belt is a serpentine belt, operating four pulleys and the inner belt is your alternator belt.

  • 2

    Follow the serpentine (outer) belt to the three pulleys lined up vertically near the front of the engine compartment. Locate the middle pulley, which is the tension pulley for the belt.

  • 3

    Loosen the bolt on the middle pulley with a socket wrench by turning counter-clockwise. Do not remove the bolt, just turn it a couple of times. Loosen the tensioner bolt on the side of the of the pulley, facing the front of the vehicle.

  • 4

    Remove the serpentine belt and then loosen the bolt on the alternator. With the alternator loose, move it forward so that the alternator belt loosens up and then remove belt from the pulleys.

  • 5

    Install the new alternator belt by placing it over both inside pulleys. Tighten the tension on the alternator belt by moving the alternator back and keeping tension on it by holding it back with a long screwdriver. While the alternator belt is tight, use a socket wrench to tighten up the bolt on the alternator.

  • 6

    Place the serpentine belt back on the pulleys and then use a socket wrench on the bolt on the front of the tension pulley. Once the serpentine belt is tight, tighten up the bolt in the middle of the tension pulley.

  • 7

    Start the Mitsubishi Lancer's engine to test the alternator belt and make sure it is working properly. Once you have verified it is working, turn the engine off.

  • Oct 08, 2010 | 2002 Mitsubishi Lancer

    2 Answers

    Replace water pump on 1997 gmc jimmy 4.3 litre


    there are four nuts that you must remove at the front of the pulley between the fan. remove fan, fan shroud,loosen accessory belts. remove water pump pulley and the pump bolts will be exposed. check belts for replacement while you have them loose. reverse procedure to install.

    Apr 29, 2010 | 1997 GMC Jimmy

    1 Answer

    Tension pulley for serpentine belt making noise


    The Tensioner Pulley Bearings are failing and either the Tensioner Pulley or the Tensioner Assembly (Pulley, Arm and Base) must be removed and replaced.

    Click on the following free direct Link. It has several of the Serpentine Belt Diagrams and Tensioners that are possible with your 4.3L V6 engine.
    http://www.2carpros.com/car_repair_information/year/1998/make/gmc/model/jimmy/1998_gmc_jimmy_drive_belt_routing_diagram.htm
    1. Remove the Serpentine Belt.
    "HOW TO":
    Standard Rules to Removal the Serpentine Belt with a Tensioner:
    A. Find the Tensioner(s). (See Diagrams on Link)
    B. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
    C. Remove the loosened belt off one of the other more easily accessed Pulleys.
    D. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

    Removing the Tensioner Pulley: See the Diagrams in the Link.
    After the Belt has been removed, with the Tensioner resting:
    DEPENDING ON WHAT TYPE TENSIONER:
    IF the Tensioner Pulley itself HAS a Bolt Head showing, SOME of these bolts can be removed and the Tensioner Pulley replaced.
    IF the Tensioner Pulley itself DOES NOT HAVE a Bolt Head showing, then go to the Tensioner Base located at the end of the Tensioner Arm. This should have a Bolt Head Showing. Remove this Bolt and the whole Tensioner Assembly will com off.

    When replacing the Tensioner Assembly - MAKE SURE you place the protruding "nipple" on the underside base of the Tesnioner into the appropriate cavity on the engine face.

    Standard Rules for Installing the Serpentine Belt with Tensioners:
    a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
    b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
    c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
    d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
    e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them

    Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

    Mar 29, 2010 | 1998 GMC Jimmy

    1 Answer

    What do you loosen to remove serpentine belt from 1991 jeep wrangler with ac and power steering. thanks 4 cyl. 2.5


    There is an idler pulley close to the power steering. Loosen the bolt that goes through the front of the idler pulley first. Then you will see the head of a bolt looking up at you. Turn the bolt clockwise to tighten and counterclockwise to loosen. The pulley is attached to the threaded bolt and it moves the pulley up or down as needed to adjust the belt tension. When the belt is replaced turn the bolt until the belt is tight. Remember to check the belt again after a few hundred miles. A new belt will stretch and loosen.

    Dec 08, 2009 | 1991 Jeep Wrangler

    1 Answer

    I dont have a diagram to run serpentine belt to a toyota camry 03


    Hi

    Replacing Serpentine belt on a Toyota camry 2003—


    Step 1--Examine the belt placement of your Toyota Camry fan belt so that you will remember how to put it back once you have removed it. Refer to the vehicle owner's manual for further information. Locate the pivot bolt on the front passenger side of the engine. Loosen the pivot bolt with a socket wrench.


    Step 2--Loosen the adjustment locking bolt that is just below the tensioner pulley with a socket wrench, and then loosen the tensioner pulley to allow the belt to move free.


    Step 3--Check the belt for any signs of cracking or irregular wear, so you can fix any problems that may exist with the pulleys. Remove the fan belt from the pulleys on the engine and take it out of the engine compartment.


    Step 4--Wrap the new fan belt around each of the pulleys the same way it came out. When you have the belt in place, tighten the tensioner pulley with a socket wrench.


    Step 5--Tighten the adjustment locking bolt and the pivot bolt with a socket wrench, and then look over the engine to check that everything is back in place.


    Step 6--Turn the vehicle engine on and watch it for a few minutes to verify that everything is operating properly, then turn the engine off.


    Please refer to these links for serpentine belt diagrams—

    Serpentine belt on a Toyota camry Link 1

    Serpentine belt on a Toyota camry Link 2

    Please do accept the solution and revert for further assistance.

    Thanks
    Rylee

    Jul 13, 2009 | 2003 Toyota Camry

    1 Answer

    Replace the serpentine belt


    First note the route of the belt. make a drawing.
    Adjustments are made by moving the power steering pump. far right of belt system.
    loosen top fixed bolt above center of drive wheel on p/s pump.
    loosen bolt below drive wheel on p/s pump.
    Push p/s pump to the left to loosen belt.
    Remove old belt .replace following route of your drawing.
    move p/s pump to right .
    top of belt should have 1/2 inch deflection.
    tighten bolts
    The end

    If you dont have belt route mail me at
    andymalt61@hotmail.com
    for drawing

    Good luck .Andy Bartolo

    Mar 17, 2009 | 1998 Jeep Cherokee

    Not finding what you are looking for?
    1992 GMC Sonoma Logo

    Related Topics:

    632 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...