Question about 2003 Mitsubishi Outlander
Posted by Anonymous on
Start in the storage compartment, there are screws in and around it.. once that comes out, then lift it up.
Hidden will be a screw or 2 between the seats, you'll see them. Take those out, then you'll want to lift and pop up the center console all the way forward, eventually you'll see a couple of more bolts holding it down, undo those and you can take the whole unit out liting it up over the shifter.
Posted on Jun 26, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
TAKE A PEEK UNDER THE HOOD IN THE FUSE PANEL FOR THE FUSE AND RELAY FOR THE COOLING FAN. IF THE FUSE IS BLOWN THEN REPLACE IT. IF YOU SUSPECT THE RELAY TO BE BAD THEN TEST IT BY SWAPPING THE FAN RELAY WITH ANOTHER ONE WITH THE SAME PINS ON THE BOTTOM. MAKE SURE IT IS THE SAME SIZE AS WELL. HOPE THIS HELPS.. PLEASE KEEP ME POSTED. THANKS FOR AN HONEST RATING AND FOR USING FIX-YA. GOOD LUCK
Posted on May 16, 2009
There is a Recall to replace your cooling fan module because of this concern.
Open your hood and look at the black box bolted to your radiator fan by the battery. If it does not have a green dot on it, you have not had the replacement fan module installed.
Contact your local dealer with your VIN handy to verify the recall has not been done and to schedule an appointment.
If the recall has been done, verify if you have power coming out of the module to the fans, as the fans do burn out eventually.... but rarely both at once.
Posted on Sep 10, 2009
Your throttle body likely needs cleaning.
Take the intake hose off and using throttle body cleaner or brake cleaner, spray a rag and use our fingers to clean the gunk off the throttle plate and the contacting area of the inside of the throttle body.
Posted on Sep 10, 2009
Dear Brake Drum Remover,
I'm gonna tell you how to pull this drum off, ya ready?First off, get the rear of the vehicle up in the air safely, Then pull the rear tires off.After those are off then take a gander at the face of the drums, are there shiny brass looking screws installed on the face of that drum?Ifso remove those counterclockwise, then, take a hammer a shock the face off the drum firmly about three times.Now, go to the opposite side on the face of the drum and do that again, keep on doin that until you can wiggle the drum off by hand...easy as that, any other questions get back to me. I'M HERE TO HELP!!!
Posted on Nov 21, 2009
Tips for a great answer:
Jan 18, 2017 | Mitsubishi Cars & Trucks
Apr 24, 2016 | 2005 Mitsubishi Outlander
Oct 04, 2012 | 2005 Mitsubishi Outlander
Sep 08, 2012 | 2005 Mitsubishi Outlander
Aug 14, 2011 | 2005 Mitsubishi Outlander
Apr 08, 2011 | 2003 Mitsubishi Outlander
Mar 10, 2011 | 2003 Mitsubishi Outlander
Jul 28, 2010 | 2005 Mitsubishi Outlander
Jun 12, 2009 | 2003 Mitsubishi Outlander
Jun 02, 2009 | 2005 Mitsubishi Outlander
521 people viewed this question
Usually answered in minutes!