Question about Cars & Trucks
Check trans fluid car idling in park, sounds like it's either low on fluid or pump is starting to fail.
Posted on Dec 29, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
start by unplugin the electric fans then remove the two 10mm bolts holding them in, the bottom of the fans are held in by a slot that they sit in so after you remove 2 bolts just lift the fans out. then you will see a tensioner i think it has 3/8 drive square hole in it( could be 1/2'' drive) just pull it down with a long bar with a 3/8 end on it to release the tension, while doing that slide the belt of,. if your car doesnt have a picture diaghram on the under side of the bonnet for drive belt routing draw a picture incorprating all the pulleys an how the belt goes around them. once the belt is of put the new one on exept over the power steering pump pulley, then pull on the tensioner again to release tension and slide the belt over the p/s pulley. these instruction are for the 4.0l falcon motor, the 5.0 v8 is really similar
Posted on Apr 22, 2009
SOURCE: need diagram of how to
for the most part there is a diagram under the hood but give this website a try drive belt diagram www.webcrawler.com if all stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.
Posted on Oct 24, 2010
Tips for a great answer:
Nov 24, 2016 | Ford Cars & Trucks
Nov 03, 2016 | Ford Cars & Trucks
Jan 27, 2016 | 2005 Ford Falcon 4.0
Feb 10, 2014 | Ford Cars & Trucks
Dec 05, 2013 | Ford Falcon Cars & Trucks
Dec 18, 2012 | 1999 Ford Falcon
Jan 15, 2009 | 1995 Ford Contour
43 people viewed this question
Usually answered in minutes!