Question about 1993 Toyota Corolla

1 Answer

1993 toyota sprinter door removal

This is a 1993 toyota sprinter with a one piece door handle mold & panel is ready to come off once i can remove molding around handle.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 2,122 Answers

Hi Craig, There's a screw which must be removed from the back of the molding. Once that's removed the unit is pushed forward to un-clip from the door frame. When that's completed there's the rod behind it which operates the locking mechanism. A plastic clip holds it and is released by pushing sideways. Regards John

Posted on Dec 29, 2013

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: To remove the interior door panel of a 1996 Toyota camry so that

My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Timmy P.

Posted on Mar 04, 2009

  • 259 Answers

SOURCE: remove door panel on drivers side 1998 sienna

there should be two screws holding it to the door panel could be concealed under a cover hope this helps regards Jim

Posted on Apr 22, 2009

  • 708 Answers

SOURCE: 2001 Toyota Camry - Removing driver interior door panel

you can take a screw driver and pry it off. Be careful if you have power windows, if it falls right off then it could pull the wires loose. The panels have clips that clip to the door. Therefore, the only way to get the panel off is to pry it off.

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Door panel removal


The door handle and trim piece have to come off before the door panel will come off

Dec 29, 2013 | 1993 Toyota Corolla

1 Answer

How to remove 2006 toyota solara door panel.


Hello, remove the arm rest--two screw then remove inside door handle--one 10mm bolt in the back, it is hidden. Check to see if there is other screws on the door panel and if so remove them.

All screws, arm rest remove (maybe some time they are screw to the door panel) and inside door handle. Take a long screw drive (you can buy a door panel removal tool but all it is flat piece of metal with a slot cut into the end to line up with the panel plastic hold tabs. With the screw drive gently pry on one corner and until it pops, now you can see the other tabs and gently pop those out. Once the door panel is loose just pull up on the panel to release it from the upper window channel.

The door will be cover with plastic and black rubberized contact cement. Remove the plastic from it sticky points. The plastic used as a dust/dirt shield.
I hope this help you. GB...stewbison

Oct 19, 2011 | 2006 Toyota Camry Solara

1 Answer

My rear doors on my Toyota Sienna will not open either from the inside or out. Suggestions?


The same thing happened to us. We have a 2000. The fix is easy, sort of. From the inside of the van, remove the bolts holding the handle and the pull ******** the hatch (inside). Then, starting from the top of the window, remove the plastic molding. It just snaps off. After you remove the top window plastic, then remove the molding on either side of the window, and finally, the large piece covering the inside of the hatch. Once you remove all the plastic, you will see a cable leading to the hatch clasp at the bottom of the door. Just pull the cable and the hatch will open.

Other comments tell us thet, i
f you can remove the inner door panel you will see a maze of cables running to the various locking points on the sliding door. If the cable going to the front latch on the sliding door is broken (or in my case, simply dislodged inside the door) the door acts as if it is frozen shut.

The front cable is short, and easily replaced even by a newbie mechanic.


Keep us updated.

Jan 25, 2011 | Toyota Sienna Cars & Trucks

1 Answer

The door jam is not locking once the door is closed & the lock mechanism is froze in the open position. How do I begin to remove the door panel?


There are Torx drive retainers that hold the outer door panel on. You will also need to remove the outer door handle and the window molding piece, and the outer door panel will come off. I would try spraying some WD-40 into the lock mechanism and with a screwdriver try to pry on it and operate the door handle to try to get it to release.

Apr 26, 2010 | 1997 Saturn SL

1 Answer

How do i remove driver side door panel? It appears that I need to remove inside door handle ... but how.


Ok. Remove the cover from the tweeter to remove the upper screw for the door handle. There are two additional lower screws at lower end of the door handle @ The arm rest part of the door. !!Hopefully this helps...post if you need further asistance.

Apr 03, 2010 | 1993 Toyota Camry V6

1 Answer

Door panel removal How do I remove the drivers door panel? I am having a problem with the door latch mechanism


on my 2000 echo there are horseswhoe spings on door and window crank latches between the handle and the inside panel if yours is same all you need is to insert a small flat screwdrivew on one side of the clamp and pshi it down the caamps are horseshoe shaped wioth a small piece of them sticking out from the door you should be able to remove them by prying on one side and [pushing down at same time after you remove both handlers door panel should pull off you may have to replace a few of the plastic locking screw b 4 you put panel back on

Dec 23, 2009 | 1993 Toyota Celica

1 Answer

How do I remove the door panel to a 1993 Nissan pickup to replace a broken exterior door handle?


Look for screws on the bottom of the door and inside the door handle there might be one on the arm rest to ....after doing that feel for the plastic stud that hold the door panel on ... once removing the panel you will see plastic covering the hole door remove that only near the top left hand side ( or right if your replacing the passenger side).... you will then see a a hole big enough for your hand to go through ...remove your door handle nuts from there be careful not to drop the nuts .... there will be a rod that goes to the door handle on the inside remember the way it clips on or take a picture your choice ...... removing the lock from the door handle is easy once it has been removed from the door ... i would practice removing the lock from the spare part to get some kind of idea on how to remove the lock ......If this helps please vote

Nov 03, 2009 | 1993 Nissan Pickup

1 Answer

How do I remove the rear door panel from my 2000 toyota camery? Specifically the inside door handle cover. I have the panel 90% off, however, I believe the door handle that releases the latch seems to be...


It is fragile but you take a small screw driver and pry the top horizantal part and then the bottom horizantal part slightly away and wella it will come off. The handle actually stays on the door I think. The cover comes off. When you do it once you'll see how easy it is.

Jul 16, 2009 | 2000 Toyota Camry

2 Answers

Removing the door panel to a 1996 Audi A6 Quattro


This info is wrong, remove the screws at the top of the panel along the edge ( one on the hinge edge and one on the latch edge. Remove the cover from the interior door handle by locating the hole on the bottom edge of the handle, insert a punch to release the cover, once the cover is released remove the 2 screws holding the handle on. Remove the handle.Once the handle is removed take the black trim piece that the handle seats into off. Pull the interior latch handle forward enough the remove the cable. Remove the latch handle. There is a small hole in the vynal under the latch handle, the last remaining screw that holds the panel on is inside this hole, remove it. The hole is hard to see, this took me several hours to find not knowing it was there. Remove the window switch module by sliding a screwdriver under the edge that faces the latch end of the door, push in the metal clip and pry up on the switch assembly. there are 2 plastic tabs that hook into the arm rest on the hinge end, that is why you must pry up from the latch end. Disconnect the plugs from the switch. Now you are ready to remove the panel. grasp the panel through the hole for the latch handle and pull up about 1" the panel should com free from the door. Do not pry the panel out from the door or you will break the plastic tabs that hold the panel on. Once you lift the panel up and off the door you will need to disconnect 2 electrical connectors and remove the white foam plug that seals the window switch harness into the arm rest and remove the window control wires from the panel.

Dec 13, 2008 | 2002 Audi A6

5 Answers

2000 Toyota Sienna tailgate door will not open/broken handle


I hope I can help, I had the same problem on my 2001. I called the dealership and they said 375.00 + parts to fix. Being mechanically inclined I decidet to try it myself. Please understand, this is not exact, but is a pretty good guide. To open from the outside, make sure doors are unlocked(mine relocked after a minute or so) place a screwdriver, long and thin, into the slot that the handle passes through the door on the right side. Raise the handle of the driver, and you should be pressing down on a cable that operates the latch. the door should release. If you cant do that, from the inside, remove the two side trim pieces. Then remove the inner door panel, One screw under plastic cap on handle, one under cap on strap... and pop off all plastic buttons(hidden) between the door and cover, a 1" putty knife will work for this. You will see the cable that used to connect to the handle. Remove the cable by pulling it through the slot(apparent when you get to it) and now remove the two screws that hold the handle on. Also, you have to remove a screw from the passengers side of the cover plate over the handle. the plate will slide(not sure which way now), and it will come off. replace the handle and etc..... inreverse.. Took me 25 minutes, start to finish. Further questions, let me know. remember, mine was 2001 Sienna.

Jun 25, 2008 | 2000 Toyota Sienna

Not finding what you are looking for?
1993 Toyota Corolla Logo

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...