Question about 1995 Toyota Corolla

1 Answer

Door lock mechanism

Need the diagram of how the mechanism works im inside the door and I cant get the door to unlock and open manual locks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 20,706 Answers

Is it full of ice,.......
what door?
key fails on outside, ?
lever or rod in inside and latch all fail on the inside.???
state the full symptoms.??

the FSM covefs these details
and if lucky,alldata.com

if lock is 100% dead all ways, door closed , that can be hard.
as removing door panels with the door closed would be a super pain
a PITA.
if the lock is iced up, use moms hair dryer, (SO, GF, or wife)

if never seen or heard of this ever.
the only way (no ice) for this to happen
is for the link on the back side of the key tumbler to break
and at the same time, the inside lock rod snaps too.
a double failure from H3LL.

in that case we...




door lock mechanism - 319216b6-5cac-4f70-b718-f2fd007e9b00.jpg

Posted on Dec 29, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: door locks

Regarding the rear door child locks: There is a small lever on the latch side of the door, you can only see it with the door open. Move it to the other position.

Regarding the front door locks: You either have a bad door lock switch, or the power lock solenoids are beginning to fail. To check this, you will need to pull the door panels off, & measure the actual voltage at the solenoids whilst manipulating the lock switch. If you have 12 + VDC, I would suggest replacing the door lock solenoids. Not hard to change, but it IS time consuming. Best left to a dealer. Expect to pay 1 hour per side to change each solenoid.

Posted on Sep 30, 2008

  • 393 Answers

SOURCE: 99 4-runner limited-power door locks dont lock, but will unlock

check for loose ground at drivers side switch

Posted on Dec 28, 2008

  • 1861 Answers

SOURCE: 1991 Toyota Camry DX - Front Passenger Door Lock won't disengage

Your power door locke solenoid is seized. You will need to replace it. You are going to have to get the entire door panel off, and then reach in to manually pull the solenoid arm to retract the lock mechanism. Then the door will open.

Posted on Mar 06, 2009

  • 1 Answer

SOURCE: 2005 Toyota Sienna Sliding Door Won't Open

Have 2005 Sienna and its Driver side door was not openning. Cheap dealer fixed it himself in front of me. After opening the doors plastic assembly while sitting inside with a screw driver. Then he bent the clip towards left where the metal wire is connected. If you guys want to see what he did i would record a video and upload for you guys. Let me know at xahid2000@yahoo.com

Posted on Mar 13, 2009

icarus_26
  • 4 Answers

SOURCE: 1998 Toyota Avalon with power door locks, front

Check this site out
you need the passenger side door lock assembly kit.
There is one posted for sale in the US on this site. just scroll down for the following information and link
Used 1998 Toyota Avalon passenger door lock assembly 1998 Toyota Avalon
passenger door lock assembly
this is the part that surrounds the lock driver side. Car color is green cary, North Carolina 27513
The solenoid or actuator arm for the door lock assembly is probably not working to full spec.

Hope this helps.

Posted on Apr 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuse diagram


no one fuse, check the connections for switch, one may have been knocked loose. does lock open manually and is it hard? actuator may have failed or rubbing and resisting . hope this helps

Jan 11, 2014 | 2003 GMC Sierra 2500HD

1 Answer

Mazda 6 2005 driver door jammed


if you talking about door latch wont let door close.try to reset all door locks.first if you cant get door close.work unlock button with remote or door switch.then hold open door handle while you flat screw driver pull up latch in door latch should stay up so door will close.once get door close.try resetting all door locks by sitting inside vechicle with all doors close.remove key from ignition.open drivers door.wait 24 seconds.turn ignition switch on and back to lock position 3 times.press and release drivers door courtesy light 3 times.ensure doors lock and unlock.if not wait 40 seconds and repeat procedure.if this procedure fails. you have problem in the door latch and lock mechanism inside the door itself.

Jan 04, 2013 | 2004 Mazda 6 Sport

1 Answer

Need help with auto-locks!


When you get the doors unlocked, simply unplug the lock servos (motors) inside the door panels. The locks will still work manually and with the key. If they don't work with the key, then remove the linkage from the servo, to isolate the power lock function from the lock mechanism. Test the key while the door panels are off to avoid having to take them off twice to remove the linkage

Jun 02, 2017 | 1996 Buick Regal Olympic Gold

1 Answer

Passenger door will not open


I can think of two possibilities:

1) The electronic lock is malfunctioning and forcing the door to lock. From the inside of the car, try forcing the lock to the 'unlocked' position. If you can do this with your had, but it 'snaps' back to 'locked' then it's an electrical problem. Possibly the lock solenoid itself, or the BCM.

2) If you cannot force the lock to the 'unlocked' position, then it's some sort of mechanical problem - maybe the lock is just jammed. Try spraying oil into the locking mechanism from the outside and working the lock until it's free. Otherwise, remove the interior door panel and diagnose the mechanical lock.

Feb 01, 2010 | 2003 Hyundai Tiburon

1 Answer

My car realnult laguna 2001 18oocc. my back doors loked i can't open from inside,look like child lock on.and i dont have manual book. can u help me pls


I assume you can't open from the outside otherwise I'd suggest the child lock switch which is built into the side of the door.

If you can't open from either side, the only thing I can think of is that both mechanisms have siezed through lack of use. You might think it is locking and unlocking but in actual fact the catch that does the locking isn't moving or not moving enough.


The only way I can suggest to you to get the door open is to take a door card off and manually work the mechanism from the inside. It may be that it needs some WD40 to get it working freely again.

Once open check the child lock position and if this is set to work, then I suggest you deactivate it.

Maybe this Renault Forum can be interesting.

Good luck!

Oct 21, 2009 | 1998 Ford Taurus

1 Answer

Electrical mechanism will not unlock front passenger door nor can it be unlocked manually at door handle. Inside door handle will not move so door cannot be opened. Consequently, cannot remove inner door...


possibly your linkage from the electric solenoid and door lock to the locking mechanism has either fallen apart inside the door or also possibly it has gotten "over-center" and cannot operate properly from either the automatic electric or manually from the key, can you hear and click from the solenoid when you operate this electrically? and see lock button move a little,this would be a sign it's over-center.

Sep 24, 2009 | Toyota Sienna Cars & Trucks

1 Answer

Cant open rear doors from the inside; cruise control doesnt work


after cking the child lock, try locking and unlocking the manual locks to see if you can hear any movement inside the doors. if all else fails, you have to remove the door panels.. starting from the aft lower corner, (careful not to tear the plastic moisture sheeting, just peel it back), the door panels are normally held in by plastic plugs and screws under the armrest, etc. once inside the door cavity, ck the linkages for wear or any signs of them being disconnected. try all the lock mechanisms again to pinpoint the cause, its good practice to clear all the drain holes at the lower part of the cavity once you're in there.

Jun 02, 2009 | 1996 Audi A4

1 Answer

My 2001 Chrysler Town & Country passenger sliding door won't open


your door panel can come off and you can access internal door locking mechanism from inside car first inspect to see all rods are hooked into plastic sleeves then make sure lock is disengaged by pulling rod towards rear of van it should then be able to be opened easily if not your locking mechanism is frozen inside of door between a pillar and door it will have to be pushed to open from inside of door panel once you do that door will open if you cant make lock work manually once this is done replace locking mechanism or rods accordingly.

Feb 02, 2009 | 2002 Chrysler Town & Country

2 Answers

Central locking keeps locking the car. Unable to open drivers side door


Hello, we have a 2003 Kia Rio- problem as above- unlocking and then locking- only way in and out through passenger door.
This is what I have done and everything is back to normal- I hope it works for you.
1 Remove 25AMP fuse that controls door central locking from main box under the bonnet.
(AT this stage my passenger door opens- drivers side does not, the mechanism won't fully rotate)
2, Spray key with WD40 (or similar moisture repellent lubricant). Gently turn key to loosen mechanism- Partly remove key and spray lubricant into lock, have fun locking and unlocking!
3, Replace 25 amp fuse
4, Write yourself a cheque for garage labour and parts and wife brownie points!

Aug 09, 2008 | Kia Rio Cars & Trucks

Not finding what you are looking for?
1995 Toyota Corolla Logo

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...