Question about 2004 Renault 181

3 Answers

1.5dci 2004 scenic wont start

Car has had injectors fuel pump tdc sensor changed and still wont start engine turning over but nothing
Any ideas

Posted by on

  • rusty s Jun 08, 2009

    car has fuel pressure new timing belt will run on carb cleaner think elec problem
    Thanks for input

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 20 Answers

Hi is there fuel getting to engine?any vapour coming out exhaust?sometimes glow plugs not working can cause this.try a squirt of easy start into air filter.NOT MUCH!!READ INSTRUCTIONS.HIGHLY FLAMMABLE.then start car for about 10secs.get this from car accessorie shops.if it fires on this its highly likely glowplugs not working or fuel pumptiming out.its hard to say without seeing the car

Posted on Jun 07, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi may be the pressure of the fuel-pump is weak thats why cannot provide the average fuel to start the engine

Posted on Nov 04, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, I changed the fuel pump on my 2004 Hyundai sonata. Now my car wont start. The fuel pump is working since I hear it start. Fuel is getting to the fuel injectors and the fuse is working. I have to spray starting fluid on the intake and this allows the car to start but once I turn it off, the car won't start again. I have a full tank of gas. What could be the issue?

Posted on Jun 30, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel pump wont shut off turn key on it comes on to pressurize then it wont shut off but there are no leaks


There is an oil pressure switch in parallel with fuel pump relay, if that switch is closed, the fuel pump will run all the time. Click on the link. At the fuel injectors, top wire is voltage, bottom wire is ground. If there is no ground, both wires will have voltage. Make sure battery has a full charge.

https://s17.postimg.org/vijjimikf/fuel_injectors.jpg

Jun 17, 2017 | 1991 Chevrolet Corsica

1 Answer

2004


If it is not getting fuel when you first start it, nothing you replaced is involved.
Could be a faulty fuel pump relay or check valve in the pump.
You would need to check fuel pressure at the injectors before you first crank the engine. It should have at least 25-30 psi of pressure after sitting overnight. And the pump relay should power the pump for 3 or 4 seconds when you first turn the key switch on.

Jan 15, 2013 | Pontiac Grand Am Cars & Trucks

1 Answer

What is the fuel pressure from the main pump to the engine.trying to be certain that my fuel have the require pressure for starting


Is the 30 ltr engine diesel? If so what was the reason and changed the Injectors? Did you follow the correct procedure to renew the injectors? This engine has two oil pumps. One is for the engine and the second one is the high pressure for the injection cranking system. On starting the engine and trying to start are you sure you receive the correct oil pressure to cause the injectors to open? If everything is okey,go to crank or cam sensor or even to the accelerator pedal.Also is better to clean the throttle body from any dirt. Use a scanner to give you the fault .Also bear in mind that these vehicles are fitted with the following secret,if you have a blown brake lights fuse or brake lights bulbs will not start,just engine turn and no engine run. It is the immobilizer activation. Do not over 32 times crank start otherwise you will loose ecu.

Sep 16, 2012 | 2000 Isuzu Trooper

1 Answer

Non starter


Have you checked to see if your injectors are firing and have you checked your fuel pressure?

Aug 26, 2012 | Mercedes-Benz 300-Class Cars & Trucks

1 Answer

I have an 89 chevy c1500, 5.7, 2wd. Had it running and trying to get it timed. During this process i noticed the injectors quit giving gas. I put gas in it and nothing changed so i have been chasing the...


the reason the injectors stopped is because the motor is not running.this is a safety precaution built into the computer so the engine won`t flood.if the fuel pump is not working then you will have to check powers and grounds at the fuel pump connector by the gas tank to see if the unit is getting fed power and ground.someone will have to try to start the car while you check this out as there is a 2 second prime circuit if the car is not turning over.also this system uses the distributor to know that the engine is turning over to start.you may have a bad pickup coil in the distributor.this system also grounds the injectors through the ecm so you should have power to the injectors when the ignition is turned on,for your information.

Apr 08, 2011 | 1990 Chevrolet K2500

2 Answers

Wont start it cranks but nothing happens.wont turn over. put a new what you would call distributor. still nothing.


If the Starter isn't turning the engine over, but you hear a clicking sound, you may have a bad Starter.
If the Starter is turning the engine over, but you are getting no Spark, you may have a failed Camshaft or Crankshaft Position Sensor, or your Timing Belt may have jumped or broken(common on the neons).
If the Starter is turning the engine over, but you are getting Spark, you may have a failed fuel pump, fuel pump relay, or fuel pressure regulator.

Before you start replacing sensor, double check the Timing belt to ensure it hasn't broken or jumped, and check to see if you are getting a spark or not.

Mar 12, 2011 | 2003 Dodge Neon

1 Answer

Renault scenic 1.6 16v. occasionally will not start


This could be a possibility of a bad connection to the engine speed sensor or in other terms flywheels sensor or TDC sensor located under the thermostat housing screwed to the gearbox by two bolts, when the problem occurs try playing around with the connector connected to the TDC sensor and then try to start it, renault has a new modified connector and TDC sensor on the market.
I hope this helps.

Apr 14, 2010 | 2002 Renault Sportwagon

2 Answers

2001 automatic Renault Scenic wont start every time & keeps stall


Possible tdc/crank sensor. this can cause the car to not start and cut out

Jul 07, 2009 | 2000 Renault 181

Not finding what you are looking for?

Open Questions:

See all 2004 Renault 181 Questions

Cars & Trucks Logo

620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

xxxxxx xxx

Level 3 Expert

4844 Answers

yadayada
yadayada

Level 3 Expert

75744 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...