Question about 2009 Volkswagen Eos
The seat will move in all other directions except forward & backward. Could it be a fuse? If so which fuse is it. The manual doesn't identify location of power seat fuses.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There should be a connector under each seat which connects power to the heating element. It is likely either clipped to the seat or tucked under the carpeting. You'll almost definitely need to remove the seat to get easier access to it, though it should be possible to find/access it without removing it, just more difficult. Once you find it, disconnect it. You can use any multimeter with a continuity tester to test the circuit. First, check the DC voltage coming from the wires that come up from the floorboard. If you are getting voltage there, you will want to check continuity of the element itself by probing the two wires with the meter set to it's continuity testing selection. If there are more than two wires you will need to determine which is the common wire and which are the "live" wires. With the power disconnected you can test the element to figure this out easily. For example if your heated seat has three wires, test all three for continuity in pairs. If one wire always shows continuity no matter which other wires on the same plug you touch that should be common.
If the element tests good (in other words you find that all the circuits show continuity) and you are getting power from the plug that comes from the vehicle itself, you might need to check the resistance of the element. It is rare to have a bad element that still shows continuity, but it is possible that the resistance may have for some reason become lowered and the element therefore does not heat up.
Try these and let me know how it goes!
Posted on Jan 30, 2009
check the connections first / if its still not connecting then it needs a motor for the seat/ Please rate my response thank you very much
Posted on Jan 31, 2009
SOURCE: Airbag warning light displays on
the connector you need to look at is fairly easy to access. look at the seatbelt connectors to make sure it did not come loose or out of is plug. if it has power seats move the seat forward and up to get the best access.
Posted on Aug 03, 2011
Tips for a great answer:
Dec 15, 2015 | 2003 Chrysler Town & Country
Sep 12, 2012 | 2009 Chevrolet Impala
Nov 14, 2011 | 2000 Subaru Outback
Jan 26, 2011 | Lincoln Town Car Cars & Trucks
Nov 12, 2010 | 2000 Mercedes-Benz CLK
Dec 13, 2009 | Dodge Grand Caravan Cars & Trucks
Aug 21, 2009 | 1995 Lexus GS 300
Aug 25, 2008 | 2001 Lincoln LS
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: