Question about Cars & Trucks

1 Answer

Mustang skid steer

1998 mustang 2060 skid steer starts right up when cranked but dies the second the key is released

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 956 Answers

Check the ignition fuse.

Posted on Dec 28, 2013

  • 5 more comments 
  • Anthony Scozzafava
    Anthony Scozzafava Dec 28, 2013

    Not a fuse .. have checked them all.

  • Lodhi Autos
    Lodhi Autos Dec 28, 2013

    Check the by pass circuit at baslast resistorl

  • Anthony Scozzafava
    Anthony Scozzafava Dec 28, 2013

    Lodhi no such beast on this skid steer

  • Lodhi Autos
    Lodhi Autos Dec 28, 2013

    Check the ignition switch. Perform the ignition switch test with test lamp.

  • Lodhi Autos
    Lodhi Autos Dec 28, 2013

    Minimize the spark plug gaps to 0.70 or even 0.60 for test purpose only. If this solves the problem replace the ignition coil.

  • Anthony Scozzafava
    Anthony Scozzafava Dec 28, 2013

    Lodhi read the post ... this is a diesel skid steer!

  • Lodhi Autos
    Lodhi Autos Dec 28, 2013

    Sorry for your inconvenience I misinterpreted its model and year. Please have a look on the following. -Air is getting in fuel system.- Fuel filter,- Contamination,- Air leak in lift pump, if any,- Solenoid on injection pump, - Lack of Fuel pressure, - Seat belt buckle connectivity. Hope that works.

×

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 132 Answers

SOURCE: 2005 V6 Mustang

check for fuel, spark and compression. these are the only things needed for a engine to run

Posted on Feb 08, 2009

REDOIL
  • 355 Answers

SOURCE: 1998 Tacoma V6 (Pre-runner) dies when key is released

WEL I WOULD CHECK MASSAIR FLOW SENSOR OR LOOK FOR VACUM LEAKS LIKE HOSE COULD CAMSENSOR OR CRANK SENSOR OR IF YOU PUT THE ECU DID YOU HAVE PROGRAMD

Posted on Aug 12, 2009

  • 1206 Answers

SOURCE: She starts, then dies right after?

you must replace the (iac) motor its the controller for the air in the intake at start up.usually on top near the plenum...meets the air tube.two bolts and a two wire plug try removing and cleaning it with carb clean solvant.

Posted on Jan 26, 2010

johnjohn2
  • 5763 Answers

SOURCE: 1999 v70 wagon 2.4t starts, as soon as you release

This sounds like a ignition problem,check the ignition switch. see if it looses power when the key is released,also if it just cranks then it may just die when the key is let go for another reason than the switch, but i would start with the switch first.

Posted on Sep 14, 2010

reaperautomo
  • 206 Answers

SOURCE: why would turning the steering wheel while cranking engine gets my car to start?

The ignition switch in the column most likely has a break in it. So when you move the steering wheel, it moves the wire so it completes the connection when you turn the key. Have the ignition switch replaced.

Posted on Oct 20, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you put a mustang skid steer in nutral to tow it .


There may be a hydraulic release.,. auxiliary pressure release somewhere or some lever that releases the differentials., I'm not positive but most have these options.not sure where they are on your don't know model or size.but should be under a panel many under feet or in engine department.,

Jan 06, 2017 | Cars & Trucks

1 Answer

My mustang 442 skid steer battery dies if it sits a few day I changed the battery and it still does it


Charge the battery, then remove one of the terminal connections. With everything off in the vehicle, touch the wire to the disconnected terminal. If you get a spark, something is draining the battery in the vehicle. Possible light somewhere that can't be seen is staying on.

Aug 29, 2015 | Cars & Trucks

1 Answer

2007 mustang will turn over and even start but dies out immediately a if you killed the ignition. What's up with that?


Re;2007 mustang will turn over and even start but dies out immediately a if you killed the ignition. Engine cranks & starts,stalls w/key released to 'run' position ??

Apr 23, 2014 | 2007 Ford Mustang GT California Special...

2 Answers

1995 honda odyssey starts and then dies


Isince it cranks, means you have power, elctric system is ok! I guess.. this could be a result of gas delivery problem... either a pump or gas circuit controller.... OR a small propable reason if you have an immobilizer (electronic chip on key!)... but there should be the securit key highlithed on dashboard...

Sep 01, 2012 | 1995 Honda Odyssey

1 Answer

1992 mercedes 300e cranks over starts for a second then die


Could be a number of things. Start with the fuel pump relay. When your key is in the start/crank pos. it overides the relay as soon as you release the key to run possition the relay has to stay ingaged or the fuel pump will shut off. Also look in your owners manuel for impact or emergency fuel shut off switch reset.

May 13, 2011 | 1992 Mercedes-Benz Mercedes Benz 300 Class

1 Answer

My mustang died while i was driving down a bridge. We noticed that the coil pack was cracked and changed that along with the crank sensor and cam sensor. My theft light flashes really fast even while i try...


Remove the key from the ignition. Pull the negative battery cable, and floor the brake pedal for 10 seconds. Replace the cable and then try and start it. That may reset everything.

Sep 26, 2017 | 2002 Ford Mustang

1 Answer

2005 V6 Mustang


check for fuel, spark and compression. these are the only things needed for a engine to run

Feb 08, 2009 | 2005 Ford Mustang

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...