Question about Nissan Cars & Trucks
I have the intelligent key fob with the additional Avital button attached to the fob. I push the button and the car tries to start but won't.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It looks like you have the "Smart Key" (a small rectangular box) that does not look like a traditional key.
What you also have is a dead battery inside the Smart Key.
Look closely at the box; there is a little button on the side. Press it. This will release a small hidden key. After you remove the small key, use a small flat blade screwdriver to pry the case of the box open at the slot provided. Take the unit to a store that sells miniature batteries, and have it replaced. You will NOT have to reprogram it after the battery is changed. The life span of the miniature batteries is roughly 20 months, less if exposed to RFI, like sitting on a TV, a monitor, or other electrical device. The Smart key TRANSMITS all of the time, even when you do not press the buttons. This is why the battery only lasts 18-20 months. Let me know if this fixes your issue..
Posted on Dec 16, 2008
Some key fobs are coded and if this is so you will need to take it to your Nissan dealer with all details of the vehicle i.e. Log book/title and vin number proof of ownership. There may be a small charge for this.
Press the Blue Button please when satisfied with my FREE effort, Thank You!
Paul 'W' U.K.
Posted on Feb 05, 2009
Check the locking solenoid / actuator in the door behind the panel, could be burned out or loose wire. It should take about 20-30 minutes to open, fix it and close the door panel if there's no major problem. Autozone might be able to help out with a solenoid.
Posted on May 17, 2009
I too had this problem. I finally found out that my problem was the result of the metal contacts that touch the circuit board when you push the buttons had worn out. To correct my problem, I purchased a small pad that slides right inside the remote and fixes all the buttons. Since then, my remote has worked problem free for the past 3 months. The company that makes the pads is KEYLESSFIX. The following link will take you to the actual website:
Please remember to rate my solution. Thanks!
Posted on Feb 01, 2011
Tips for a great answer:
Jul 30, 2017 | Nissan Cars & Trucks
Dec 28, 2015 | 2006 Nissan Murano
Dec 02, 2015 | 2013 Nissan Sentra
Aug 27, 2014 | 2003 Nissan Murano
Dec 28, 2013 | Nissan Cars & Trucks
May 09, 2011 | Nissan Murano Cars & Trucks
Apr 05, 2010 | 2009 Nissan Murano
Jul 30, 2009 | 2005 Nissan Murano
Feb 05, 2009 | Nissan Z Cars & Trucks
19 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: