Question about Cars & Trucks
My truck started to stall while driving, replaced the crankshift sensor, still continued so i replaced the throttle body, still stalled out and then it started to have trouble just starting all together so i replaced the pcm. ran fine for a couple weeks then started to act up and now it wont crank over at all. any solutions to what i should do. i have 5 new codes show up 039,035,644,2123,2138
Sorry without my head under the bonnet--sorry --HOOD i honestly couldnt tell you ,the codes do not align with my universal OBD or the makers so try another code reader
Posted on Dec 28, 2013
Testimonial: "the codes i got were from when i turned my key 3 times and they came on my odometer"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I am going to assume that it will not run even if you push on the accelerator pedal?
Can you install or attach an old timing light to the spark plug wires, turn it one and try to start it. The light should flash with the engine running, but if it shuts off at time of engine die, and the engine is still spinning, you are losing spark, My suggestion is the cranks shaft sensor on bell housing.
Second, install a pressure gage on the test port on the fuel rail and watch it as you start the engine, fuel pressure should not drop as the engine dies, if it does, the pump is not working correctly. There are two modes of power to that pump, one to start and timed, for only a few seconds to prime the system, and one to run continuously. Find the wires going to the pump at the tank. Connect test light to those wires and watch what happens during crank and at stall, You should not have the pump shut off and the engine dies.
If you have spark, and fuel pump working, when did you last change the filter,,but I put that LAST.
It has to be one or the other of these.
Posted on Aug 04, 2008
check vacuum hose into throttle body, also clean throttle body orifices and iac. remove iac [engine off] and have someone turn key to on to see if plu8nger works. just a thought .
Posted on Dec 25, 2008
SOURCE: 1999 volkswagen stalled
first check cylinder 1 , spark plug, ht leads, coil,
then clean the trottle body with carb cleaner
if that does not work replace the throttle body, comes complete, and do a basic setting on it with diagnostic machine
Posted on Feb 19, 2009
Tips for a great answer:
Sep 14, 2015 | 2000 Buick Park Avenue
Jul 22, 2014 | 2002 Dodge Neon
Sep 23, 2013 | 1988 Dodge Ram 50
Aug 23, 2013 | 2000 Dodge Caravan
Jun 10, 2011 | 2001 Dodge Caravan
Jun 23, 2010 | 2006 Dodge Durango
Jan 01, 2010 | 2005 Dodge Neon
Feb 11, 2009 | 1994 Dodge Caravan
Aug 18, 2017 | Cars & Trucks
67 people viewed this question
Usually answered in minutes!