Question about 1999 Lexus RX 300

1 Answer

How to install power antenna motor on 2001 lexus

How to install power antenna motor on 2001 lexus rx300

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 430 Answers

The power antenna is a plug and go item. You will need to open the inspection cover on the inside cargo area quarter panel to reveal the motor drive. There you will find a detachable power plug , antenna cord and a series of mounting bolts.
On the outside you will find a chrome bezel which is threaded and may have several notches in it. Using a set of needle nose pliers you can unscrew the bezel which works as a threaded cap and trim ring.
Then remove the internal mounting bolts and the unit should slide down and out from the inside of the cargo area. Take your time and don`t slip forcing the pliers or you will scratch the paint. Nice vehicle, mine is at 160,000 miles and counting

Posted on Sep 12, 2009

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: code p1130. where is the sensor located

P1130 Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction (Bank 1 Sensor 1) 
This sensor is the hardest to get at. It is between the cat and the cylinder block on the bank of cylinders closest to the firewall. Not much wiggle room back there.
Sensor will run you about $225 from Toyota, $275 from Lexus, but you may be able to get a Denso sensor on line.

Good luck and hope this helps. keep me posted. 

Posted on Jun 26, 2009

keithheavili
  • 410 Answers

SOURCE: ? to Replace Timing belt on 2000 Lexus Rx300 with 57,000 miles.

If it is running perfectly I wouldn't think that you would need to replace the timing belt. You shouldn't need to replace that until 100,000-120,000 miles. I would definitely hold off until now unless you have start having some timing problems. Let me know if you have any other questions. Thanks for rating my response and for using FixYa!

Posted on Jul 08, 2009

  • 6 Answers

SOURCE: HOW MANY LITERS OIL NEEDS LEXUS RX300 2001?

You need 5 quarts in the Lexus RX300. Beware, the RX300 has a history of engine sludge problems (just search the internet for Toyota engine sludge). I would recommend Mobil 1 (this is FULL synthetic) and for viscosity I would recommend 5w-30 in the winter and 10w-30 in the summer. Your manual will verify the viscosity that I have mentioned. You must use good engine oil with this vehicle or else you will have an engine sludge problem and this could cost you a new engine. The RX300 is a wonderful vehicle and very reliable, but it requires some care that you must give it or else it will cost you a lot of money and maybe leave you stranded. For instance, change the oil regularly (no more than 4000 mile intervals) and also change the transmission fluid (no more than 60000 mile intervals). Search online for transmission failures in the RX300 - you'll find that the people who did not get a transmission flush were very sorry!!

Posted on Jul 21, 2009

  • 17 Answers

SOURCE: replace side marker light on lexus rx300

Remove 3 - 4 screws on fender cover close to side marker light. Pull fender cover out a bit for you to use your other hand to reach side marker light. By twisting on one direction and here you go the light out. Replace new bulb and replace everything on reverse order.

Posted on Aug 18, 2009

Murphybanton
  • 2004 Answers

SOURCE: Lexus RX300 engine light n VSC light comes on

VSC means Vehicle Stability Control.

It comes on when the sensor send a signal that the vehicle is not stable on the ground.....check the wheel balancing and alignment and the air pressure of your tires too.

Good luck.

Rate this solution.

Posted on Aug 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Was running and the fuel rail was loose and after I discovered it was loose it shot gas out and shut down quickly while running.


2001 Lexus RX 300 - Openbay

https://www.openbay.com/intake-manifold.../2001-lexus-rx-300/chicago...
2001 lexus rx 300 4dr suv base fq oem 1 500 ... rely on very precise measurements of air to properly mix in fuel, so these leaks lead to poor engine performance.

Lexus RX300 Valve cover gasket replacement - YouTube

? 11:21
www.youtube.com/watch?v=brV5MEgzfHs
Feb 17, 2014 - Uploaded by Stevie Kicks
Lexus RX300 engine repair. ... Nice video Stevie. I was watching it to see if I could spot the bank 1 sensor 1 air/fuel sensor. I have to replace ...

Oct 12, 2015 | 2001 Lexus RX 300

1 Answer

Timing adjustment, 99 Lexus RX300


There is no adjustment on it,Because of having a timeing belt.If the timeing is off the belt has probaly slip.You will have to have a new timeing belt installed.

Oct 20, 2012 | Cars & Trucks

2 Answers

I have lost my lexus remote control key. how and where can i buy a new one through the net. thank you..


Hi,

Buy it from :-

http://cgi.ebay.com/ebaymotors/2001-2002-2003-LEXUS-RX-300-RX300-KEY-REMOTE-KEY-_W0QQcmdZViewItemQQitemZ120607853494QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

I hope i have been helpful.

Thank You!!

Aug 21, 2010 | 2001 Lexus RX 300

1 Answer

Lexus RX300 How do I change the door locking security.


Your door locks are normally programmed by the dealer.
This lock program setting is called speed linked interlock.

Not sure if it can be done without the dealerships hand held programmer,.It would have been done at the time of sale for the first owner.

Call Lexus service to inquire and ask about the sensor beeper shutoff. It was not a standard equipment, factory installed device on the RX300

Oct 28, 2009 | 2001 Lexus RX 300

1 Answer

Need ignition removed from 01 lexus RX300


Remove plastic covers from steering column area. Insert key into ign. turn to acc. use pick to push in pin on bottom of ign cyl. pull out cyl.

Feb 22, 2009 | 2001 Lexus RX 300

Not finding what you are looking for?
1999 Lexus RX 300 Logo

1,856 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...