Question about 2006 Lexus Is 250

Open Question

Is250 2008 cvc light is on what does that mean?

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Diagnosing bad cvc axle

cv axles have a distinct click when turning corners at slow speed when they are on the way out
if bad they will produce a harmonic vibration or a hum

May 14, 2016 | 2005 Hyundai Tucson 2.7

1 Answer

High pitch sound coming from ritgh front alex

There are parts on the brake pads called squeeler clips. These are for making an audible noise to warn you that the front brake pad is very close to failing. It means you are about to damage the front Rotor and are close to losing the front brake for stopping purposes.

The second possibility is the front axle bearing or CVC joint is failing.

Jan 25, 2012 | 1999 Chrysler 300M

1 Answer

I have an unusual shutter or vibration when accelerating.

Motor mount or CVC joints.
CVC joints can be ckecked by trying to see if there is any ratteling or excessive movement in the whole housing while trying to shake it vigorously.
Motor mounts need to be inspected for cracks or tears in the rubber areas of the mounting.
Also look for loose exhaust system parts by trying to shake the exhaust.
Please rate my answer,Gary

Sep 25, 2011 | 1995 Subaru Legacy

1 Answer

How do you tell if a cvc joint is broken without pulling everything apart

If the CVC joint is broken, the car would not move. I assume that you are hearing unusual noises in the drivetrain. It is worthwhile to have a certified mechanic take a look at the car to determine if the CVC needs to be replaced, before serious problems develop.

Dec 12, 2010 | 1998 Dodge Grand Caravan

1 Answer

On my 1999 Acura TI theres a clicking noise when turned left, and humming during acceleration.

It sounds like your cvc shaft is starting to wear out, usually when the cvc joint starts to go then you hear a clicking noise as you are turning.

Oct 28, 2010 | 1999 Acura TL

2 Answers

Clacking noise o n ft passengers side when turning to left.

poss u have a bad cv axle in the front or brake pads are loose

May 31, 2010 | 2000 Nissan Xterra

1 Answer

Cvc joint, can u move it forward or will it mess up somthing?

Hello, I as a professional would say the safest thing would be to have it towed. If the joint has not been distroyed to the point of falling apart then you could possible push it by hand if the inboard joint is bad and not the outboard joint next to the wheel. With the outboard broken there is a very strong posibility the if you tried to make a turn even by pushing the joint will just lock up completely and you will not be able to push the vehicle past that point. You also take a chance of causing additional damage to the vehicle if the assembly comes apart completely. The outboard CVC joint is more dangerous than the inboard since the outboard is in a percision location to allow turning. Good Luck, RAC

Apr 10, 2009 | 2000 Mazda 626

1 Answer

Replace cvc boot

you first must remove the shaft, then disassemble it, disassembly is done by turning the joint full in one direction and using a brass punch driving the joint off the end, once off you'll need to clean everything, then relube the joint, put on new boot, then re-assemble and re-install.

If this sounds to complicated, you can buy a remanufactured shaft which comes with both joint ends from autozone and just replace the shaft

Apr 02, 2009 | 1994 Mercury Tracer

1 Answer

Cvc to motor

Yes. You will not be able to get the motor out unless you remove the axle

Apr 01, 2009 | 1993 Chevrolet Cavalier

1 Answer

Need to install cvc joint for 98 neon

The same way you took it off, pull the bolt to seperate the lower control arm from the strut and move the lower arm out the way wit a pry bar on reinstall to make life easyer, also use a hellolot of power lube or wd40 on all bolts n nuts so you dont round any like i did on my first few trying to be a fast guy.

Feb 26, 2009 | 2004 Dodge Neon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts


Level 3 Expert

80407 Answers


Level 3 Expert

918 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides