Question about Cars & Trucks

Open Question

Location of airbag module for a 2005 Mercury Mariner

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 63 Answers

SOURCE: 96 honda accord airbag module......

does the srs light come on and go off at random times and sometimes stay on if that is so check the srs switch under your seat it try moving round in the seat applying weight in diff locations and see if it goes off and on if so then you might need to replace that switch

Posted on Mar 16, 2009

Ad
chrischronic
  • 235 Answers

SOURCE: 2005 mercury mariner charging probles

if the altinator is only charging 12.8 volts then its bad. it should be charging 13 to 14 volts

Posted on Mar 25, 2009

  • 1 Answer

SOURCE: 06 kia sportage airbag control module

If your refering to the light on top of the dash that says "psgr air bag not connected" here;s the deal.

The module is activated when someone sits in the seat. Turn the key on and the notification will light. Go around to the psgr side of the car and sit in the seat and the light should go out.

Posted on May 03, 2009

  • 462 Answers

SOURCE: 2005 honda crv airbag module location

Most of the time it's in the middle of the car under the center consol(consol with stereo) , SRS module usually mounted on the floor.

Posted on May 27, 2010

  • 1 Answer

SOURCE: replace alternator on 2005 mercury mariner

change alternator on a 2005 mercury mariner 2wd with a v6

Posted on Jul 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the OBD connector on a 2010 mercury mariner


Hi Chad,

Here is a follow up for you. The picture provided is from a 2005 with the OBD location. http://www.obd-2.de/carcode/pics/dlc/ford/Mercury-MarinerHybrid-2005.jpg .

Looking at many examples on line from all applications. The majority of these plugs are under the steering column. Either right or left mounted under the dash board.

On some foreign models . Remove the droor between the center console. And it will be mounted on the floor between the seats.

Fare . Well.

Dec 09, 2014 | 2010 Mercury Mariner

1 Answer

2005 mercury grand marquis driver air bag circut open after replacing airbag,clock spring,and control module


You need to have the system checked for what the fault code is...are you sure it's the drivers side air bag or the drivers side, side air bag(located in the seat back?)They're could be a problem with the wiring under the seat.

May 12, 2014 | 2005 Mercury Grand Marquis

3 Answers

Air bag module location


Hello andread41,

It is under the center console between the front seats.

Regards,

netvan

Feb 23, 2011 | 2005 Chevrolet Cobalt

2 Answers

2005 Mercury Mariner Problem: A/C fan control only work when it's turn on to the fullest...how do I solve this problem


Most vehicles have a blower motor resistor located on the blower housing. It probably needs replacing. Check the wiring connector too. Sometimes a loose connection can melt or damage the connector.

Nov 03, 2010 | 2005 Mercury Mariner

1 Answer

What is the factory code for the keyless entry system for a 2005 mercury mariner


factory code is located in the owner's wallet card in the glvoe box

Jun 28, 2009 | 2005 Mercury Mariner

1 Answer

Need to find the computer module on the 2006 Mercury Mariner


Located on passenger side. Tou need to look under the dash then turn to look under the console. You will see a black box PAT unit around 8 or 10 inches long with fairly large numbers printed on its side. These are the 5 numbers you will need

Jun 07, 2009 | 2006 Mercury Mariner

1 Answer

2005 mercury mariner charging probles


if the altinator is only charging 12.8 volts then its bad. it should be charging 13 to 14 volts

Mar 25, 2009 | 2005 Mercury Mariner

1 Answer

I have a code p1435


the pump is located on the lower subframe in the front drivers side. Make sure the harness isn't damaged. make sure there is no water in the pump. It should come on fo 20 secs when you start the engine

Dec 29, 2008 | 2005 Mercury Mariner

1 Answer

Replace alternator on 2005 mercury mariner


change alternator on a 2005 mercury mariner 2wd with a v6

Nov 16, 2008 | 2005 Mercury Mariner

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...