Question about Pontiac G6

Open Question

Remove rain x wiper blades

I can't remove the adapter from the wiper arm

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: auto maintanence

Yes the spring in the arm is weak, replace the arm and your problem will be solved.

Posted on Oct 17, 2008

bibleman01
  • 334 Answers

SOURCE: remove rear wiper blade on saab 9-5 estate

Best way go to a parts store and ask for help and they would probably slip it on for you
God Bless you Greg

Posted on Dec 03, 2008

c17hydro
  • 2984 Answers

SOURCE: How to remove and replace the wiper blades on a 2006 BMW 325i.

My suggestion....go to Schuck's/Kragen?Chief's?Auto Zone....they will install them for FREE.

Posted on Mar 11, 2009

  • 566 Answers

SOURCE: trouble replacing wiper blades on 2004 GMC Yukon

hi from uk re wiper blade you only have to swivel blade enough to access the press clip that holds the swivel mount of the blade then while pressing clip pull wiper blade down out of the wiper arm U type hook replacement is in reverse make sure you note the old blade fits so you fit new one same way ?

Posted on Mar 27, 2009

  • 1 Answer

SOURCE: Windshield wiper arm disconnected

My dad helped me solve this problem on my truck...

They simply pry off. He put down a towel to protect the cowl grill, took a hammer (using the split end) and pried them right off.

There was no mechanism holding them on, when we were done working under the grill, we used the same towel, but the other side of the hammer to stick 'em back on.

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What cause auto wiper to fail when wet and work properly when dry?


Can really be only 1 of 2 things, your wiper blade itself it old and not resilient or the "hinge" where the wiper arm pivots is partially ceased and not keeping the blade against the window. To restore the wiper blade wipe Downy fabric softener on the rubber blade or lubricate the wiper arm pivot point.

Aug 05, 2014 | 2003 GMC Sonoma Extended Cab

1 Answer

How to remove wiper blade


To remove the old wiper blades from a J-hook arm, depress the button tab on the connection adapter clip and pull the wiper blade out of the open end of the "J" on the end of the wiper arm until free.

You just go to the link I attached I'm sure you will get the solution of your problem..

Jul 07, 2014 | Lexus LS 400 Cars & Trucks

1 Answer

I can get the old wiper blades off my 2008 avalon but don't know how to put on new ones. do you have to remove something from old blade?


Hello,
  1. After you have removed the old wiper blade make sure to remove any adapter left behind on the actual wiper arm as the new blade should come with a multi use adapter.
  2. It should just be a bare metal rounded hook bar now.
  3. Now if there is not adapter on the new wiper blade then put the one provided on. Often times the wiper blade comes with this adapter already on the wiper blade.
  4. Pull the wiper arm out a bit and set the new blade under the open section of the wiper arm.
  5. That adapter will have a little play to it.
  6. Push it up a bit so it fits in the slot on the wiper arm and pull up on the wiper blade and the blade should "click" into place.
Do the same for the other side and your good to go. I also recommend Raine X for your windshield. My experience as a mechanic and a storm chaser has proven Rain X to be invaluable in severe weather.
Regards, Tony

Apr 23, 2011 | 2008 Toyota Avalon

1 Answer

I need to adjust the wiper arm on a 1997 suburban, it hits the side of the window.


Wiper Arm & Blade (Front) Removal & Installation Wiper Blade To Remove:
  1. Turn ignition switch to ACCY position.
  2. Turn wiper switch to PULSE position and turn ignition OFF when wipers are stopped in the innerwipe position.
  3. Push the wiper blade clip button IN and remove wiper blade from wiper arm.
To Install:
  1. Insert wiper arm hook through opening in wiper blade.
  2. Place wiper blade pivot in the inside radius of wiper arm hook.
  3. Pull on wiper blade pivot into hook until it locks into place.
  4. Check wipers for proper operation.
Wiper Arm To Remove:
NOTE: Mark position of wiper blade on windshield to ensure proper position upon reassembly.
  1. Remove washer hose.
  2. Lift wiper arm from windshield and use a screwdriver to disengage retaining latch.
  3. Remove wiper arm from shaft.
To Install:
  1. Place wiper arm on shaft so that wiper arm aligns with marks placed on windshield.
  2. Press arm assembly on shaft and push retaining latch IN.
  3. Connect washer hose.
  4. Remove windshield markings and check wipers for proper operation.
prev.gif next.gif

Oct 26, 2010 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

The wiper motor on my 1983 Ford Ranger still works but the wipers no longer move. I think there is a failure of the mechanical linkage. Where do I go to find repair parts?


why do you think the motor still works if the wipers don't move? Can you hear the motor run or can you see a little movement when you turn the switch on?

What happens when you activate the washers?

go to a salvage yard that allows you to remove the parts yourself. Then you can see how the motor and linkage assembly comes out.


don't have 1983 info, but here is 1994:

Section 01-16A: Wiper and Washer System, Ranger/Explorer 1994 Ranger and Explorer Vehicles Workshop Manual
DESCRIPTION AND OPERATION Windshield Wiper System, Ranger/Explorer The windshield wipers are actuated by a permanent magnet, rotary-type electric windshield wiper motor (17504) . The two windshield wiper pivot arms (17526) and windshield wiper blades (17528) are mounted on a pivot shaft, one at each side of the windshield. The windshield wiper mounting arm and pivot shaft (17566) are connected to the motor by windshield wiper adapter and connecting arm clip (17531) . Ranger and Explorer vehicles are equipped with an interval wiper and washer (IWW) system featuring a lever-type turn signal and windshield wiper switch (13K359) mounted on the steering column. The IWW windshield wiper governor (17C476) uses a relay contact to control current to the windshield wiper motor . The governor electronic circuitry controls the contact to supply current to windshield wiper motor . A rear wiper/washer system is available on Explorer vehicles. The rear window wiper system consists of a windshield wiper motor mounted inside the liftgate (40010) , an articulating windshield wiper pivot arm and windshield wiper blade , a windshield wiper/washer switch (17A553) and an inline circuit breaker. The front electric windshield washer system consists of a control switch, integral with the turn signal, a windshield washer reservoir (17618) and windshield wiper motor and the necessary windshield washer hoses (17A605) , windshield washer nozzle jet and brackets (17603) and attaching parts.
------------------------------------------------------------------------------------------------
Pivot Shafts and Linkage Removal and Installation
NOTE: The left and right pivot and windshield wiper adapter and connecting arm clip assemblies are serviced separately.
  1. Perform Steps 1 through 9 of Windshield Wiper Motor Removal as described in this section.
  1. If servicing left windshield wiper adapter and connecting arm clip , remove left windshield wiper mounting arm and pivot shaft and windshield wiper blade assembly.
  1. Remove left windshield wiper adapter and connecting arm clip access cover.
  1. Remove left pivot nut, lower windshield wiper adapter and connecting arm clip and slide it out through left access opening. For installation, follow removal procedures in reverse order. Tighten nut to 10-13 Nm (7-10 ft-lb). Make sure the clip is fully seated in the windshield wiper adapter and connecting arm clip . Do not try to install clip with windshield wiper adapter and connecting arm clip on motor crank pin.
----------------------------------------------------------
Windshield Wiper Motor Windshield wiper motor are not serviceable. If worn or damaged, the windshield wiper motor must be replaced as an assembly. Removal
  1. Cycle windshield wiper blades until in straight-up position and turn ignition switch OFF.
  1. Disconnect battery and wiper motor electrical connector.
  1. Remove the right windshield wiper mounting arm and pivot shaft and windshield wiper blade .
  1. Disconnect the battery ground cable (14301).
  1. Remove the right pivot nut and allow the windshield wiper adapter and connecting arm clip to drop into the cowl top outer panel .
  1. Remove the linkage access cover, located on the right side of the dash panel near the windshield wiper motor.
  1. Reach through the access cover opening and unsnap the wiper motor clip.
  1. Push the clip away from the windshield wiper adapter and connecting arm clip until it clears the nib on the crack pin. Then, push the clip off the windshield wiper adapter and connecting arm clip.
  1. Remove the windshield wiper adapter and connecting arm clip from windshield wiper motor crank pin.
  1. Remove nut and ground strap.
  1. Remove three attaching nuts from windshield wiper motor. Remove the windshield wiper motor .
Installation
  1. Position the windshield wiper motor and install the three attaching screws. Tighten to 13.6-19.0 Nm (10-14 ft-lb).
  1. Install nut and ground strap.
  1. Connect wiper motor electrical connector.
  1. Install clip completely onto right windshield wiper adapter and connecting arm clip. Make sure the clip is fully seated. Do not put the windshield wiper adapter and connecting arm clip on the motor crank pin and then try to install the clip.
  1. Install the left windshield wiper adapter and connecting arm clip onto the wiper motor crank pin.
  1. Install the right windshield wiper adapter and connecting arm clip onto the wiper motor crank pin. Pull the windshield wiper adapter and connecting arm clip onto the crank pin until it snaps into place. The clip is properly installed if the nib is protruding through the center of the clip.
  1. Install the right windshield wiper mounting arm and pivot shaft and nut. Tighten the nut to 9.5-12.5 Nm (84-110 in-lb). NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module (PCM) (12A650) relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the strategy.
  1. Connect the battery ground cable and turn the ignition switch on. Turn turn signal and windshield wiper switch off so windshield wiper motor will park, then turn ignition switch off. Replace right windshield wiper adapter and connecting arm clip access cover.
  1. Install the windshield wiper mounting arm and pivot shaft and windshield wiper blade assemblies on the pivot shafts to dimension X. Dimension X is the distance between the centerline of the blade saddle and the top edge of the cowl top outer panel grille. The value of Dimension X for each vehicle is given in the Dimension X chart in the Specifications portion of this section.
  1. Test the system.
6bd608c.gif

Jan 04, 2010 | 1983 Ford Ranger

2 Answers

How to replace wiper blades on a 2006 honda civic


there is a clip under the center of the blade itself push in on that and slide wiper off the armature replace simply by installing it the same way you removed the old ones they will click into lock by itself

Oct 16, 2009 | 2006 Honda Civic Hybrid

1 Answer

How to remove old windshield wiper blades


Press in on the tab on the center of the blade and pull down perpendicular to the arm. To install, slide the new blade on the hook until it clicks.

May 09, 2009 | Lexus IS 350 Cars & Trucks

2 Answers

Trouble replacing wiper blades on 2004 GMC Yukon


hi from uk re wiper blade you only have to swivel blade enough to access the press clip that holds the swivel mount of the blade then while pressing clip pull wiper blade down out of the wiper arm U type hook replacement is in reverse make sure you note the old blade fits so you fit new one same way ?

Mar 27, 2009 | 2004 GMC Yukon

1 Answer

Auto maintanence


Yes the spring in the arm is weak, replace the arm and your problem will be solved.

Oct 06, 2008 | 2000 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...